Available 2 files for InterAct SV-282
Select Files
Company
InterAct
Categories
joysticks
Model
InterAct SV-282
Description
Vortex 3D PC
Operating System
Windows 95-98
Size Driver
495KB
File Name
sv-282_at.zip
Observations
1. Setup
1.1 Make sure there is a joystick icon in the Control Panel of your
Windows 95 system. If not, check your computer hardware configuration
and Windows 95 documentation.
Note: The Vortex 3D driver will not function under Windows NT.
1.2 Before the installation of the VORTEX 3D device driver,
make sure that the Windows 95 Joystick Properties window is closed.
1.3 If you choose Add/Remove Device function provided in the Control Panel
to install the device driver for the VORTEX 3D game controller, you
must insert the installation disk before clicking the INSTALL button
in the Add/Remove Device dialog box.
2. Calibration
2.1 Before you proceed with the calibration procedure, please select the
device - VORTEX 3D first.
2.2 During the calibration procedure, button R and button L of the
game controller will not be recognized by the calibration program.
3. Testing
3.1 If you use the testing procedure provided in the Control Panel,
you cannot test buttons R and L, but other buttons and the direction
control knob will respond normally.
3.2 You can run the gamepad testing program - VORTEX 3D
- under START menu after successful installation to test all the
functions of the game controller."
3.3 If you find any problem while playing games or in the Windows 95
Joystick Properties window, please double check with the testing program
- VORTEX 3D.
4. Uninstalling The Device
4.1 You can uninstall the VORTEX 3D Device Driver from the Windows 95
by either running the UNINSTALLER icon from the Start Menu or by
selecting the Add/Remove Program icon in the Control Panel.
5. TROUBLE-SHOOTING
5.1 If you have no response from fire buttons C, D, L and R, check your
I/O card to make sure it can support the use of game port 2.
5.2 If the error message " NO JOYSTICK " appears on your monitor,
ensure that your game port is enabled. You may need to enable it;
call the manufacturer of your game card or PC for assistance.
5.3 If the joystick is working erratically during game play, check to see
if you have more than one game port ( i.e. one on a sound card or one
on a I/O controller card, etc. ). If they are both enabled, an IRQ
conflict is probably the cause of your joystick problem. One must be
disabled; contact the game card manufacturer for details.
5.4 DirectX 5
On some systems with DirectX 5 installed, you will need to remove any
other joysticks from the Game Controller Control Panel before installing
the Vortex 3D.
Company
InterAct
Categories
joysticks
Model
InterAct SV-282
Description
Vortex 3D
Operating System
Windows 95-98-98Se
Size Driver
520KB
File Name
sv282.exe
Observations
1. Setup
1.1 Make sure there is a joystick icon in the Control Panel of your
Windows 95 system. If not, check your computer hardware configuration
and Windows 95 documentation.
Note: The Vortex 3D driver will not function under Windows NT.
1.2 Before the installation of the VORTEX 3D device driver,
make sure that the Windows 95 Joystick Properties window is closed.
1.3 If you choose Add/Remove Device function provided in the Control Panel
to install the device driver for the VORTEX 3D game controller, you
must insert the installation disk before clicking the INSTALL button
in the Add/Remove Device dialog box.
2. Calibration
2.1 Before you proceed with the calibration procedure, please select the
device - VORTEX 3D first.
2.2 During the calibration procedure, button R and button L of the
game controller will not be recognized by the calibration program.
3. Testing
3.1 If you use the testing procedure provided in the Control Panel,
you cannot test buttons R and L, but other buttons and the direction
control knob will respond normally.
3.2 You can run the gamepad testing program - VORTEX 3D
- under START menu after successful installation to test all the
functions of the game controller."
3.3 If you find any problem while playing games or in the Windows 95
Joystick Properties window, please double check with the testing program
- VORTEX 3D.
4. Uninstalling The Device
4.1 You can uninstall the VORTEX 3D Device Driver from the Windows 95
by either running the UNINSTALLER icon from the Start Menu or by
selecting the Add/Remove Program icon in the Control Panel.
5. TROUBLE-SHOOTING
5.1 If you have no response from fire buttons C, D, L and R, check your
I/O card to make sure it can support the use of game port 2.
5.2 If the error message " NO JOYSTICK " appears on your monitor,
ensure that your game port is enabled. You may need to enable it;
call the manufacturer of your game card or PC for assistance.
5.3 If the joystick is working erratically during game play, check to see
if you have more than one game port ( i.e. one on a sound card or one
on a I/O controller card, etc. ). If they are both enabled, an IRQ
conflict is probably the cause of your joystick problem. One must be
disabled; contact the game card manufacturer for details.
5.4 DirectX 5
On some systems with DirectX 5 installed, you will need to remove any
other joysticks from the Game Controller Control Panel before installing
the Vortex 3D.
Access to Official Website InterAct
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.