Available 4 files for Draytek VigorTalk
Select Files
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek VigorTalk
Description
All and rst
Operating System
Firmware
Version
2.6
Size Driver
1.6MB
File Name
vigortalk-v2.6.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek VigorTalk
Description
Release Note for Firmware
Information
Document PDF
Operating System
Manual
Version
2.6
Size Driver
4KB
File Name
59096f7bb86058205939e4d65f51a70120090226074352160437-releasenote.pdf
Observations
Release Notes for VigorTalk
Firmware Version : v2.6
Applied Models : VigorTalk
[New Features]
1. Improve DHCP client.
Release Notes for VigorTalk
Firmware Version : v2.5.8
Applied Models : VigorTalk
[New Features]
1. Support VoIP supplementary service functions including:
1-1. call forwarding (always/busy/no answer)
1-2. DND(Do Not Disturb).
1-3. call waiting.
1-4. call transfer.
2.New Auto-Provision mechanism.
3.Add play dial tone setting telnet command.
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek VigorTalk
Description
Quick User Guide for Firmware
Operating System
User Guide
Version
2.6
Size Driver
146KB
File Name
dae44c41a1623bdc63265c553627c0fa20090226074352151018-quick-user-guide-v1.0.zip
Observations
Check Your Package Contents
?? VigorTalk Unit
?? VigorTalk Quick Start Guide (This document)
?? CD including VigorTalk User’s Guide
?? RJ-45 (Ethernet) Cable
?? 15V DC Power Adapter
Before You Begin
If this product is provided to you by the telephony service provider or network administrator, pre-configuration of network and service settings may have been applied. You, as end-user, may be limited to access local configuration settings. Then you should follow the installation instruction provided by your provider.
Depending on the service policy, if end user configuration is permitted, please follow the major instructions described below.
The following sections will instruct you to install VigorTalk quickly. For further configuration, please refer to the VigorTalk User’s Guide.
To locally configure the VigorTalk, you should have the equipments and information below:
?? A touch tone telephone
?? A general ADSL router (e.g. Vigor 2600G )
(A router plus a Ethernet-based Cable or DSL modem will work equally)
or Ethernet-based Cable or DSL modem
?? An established Internet account from an Internet Service Provider (ISP), including IP address, subnet and gateway address or DHCP availability.
?? SIP proxy address and registration information from SIP Registrar (e.g. DrayTEL)
DrayTek provides two interfaces for configuration. You may need to use both for initial installation.
?? DrayTek IVR(Interactive Voice Response)*
?? Web GUI
* Interactive Voice Response (IVR) is an automated voice system which allows caller can navigate the function menus created by providers using their telephone keypad.
Connecting VigorTalk to your Phone and Network
With General ADSL Router
If the router act as an DHCP server, to use the Web GUI, you only need to connect both the PC and VigorTalk to the router.
1
Use a standard RJ-45(Ethernet) cable to connect the LAN port of VigorTalk and the router.
2
Use a standard RJ-11 (telephone) cable to connect the Phone port of VigorTalk and the touch tone telephone.
Note: Do not connect RJ-11 (telephone) cable to the wall jack
3
Connect the power adapter to the receptor of VigorTalk and plug the other end of the power adapter to a wall outlet to power on the unit.
4
Via the phone key pad, press “***#” to enter the VigorTalk IVR. You will hear the welcome message.
5
Press “41#” to “Check the IP Address”. You will hear the IP address of VigorTalk. Write it down and then hang up.
6
Open your Web browser and enter http:// (VigorTalk IP Address that you heard). Enter the default password “vigortalk” and leave the administrator filed blank in the window.
7
You may start configure VigorTalk via WebUI now. For more details, please refer to the User’s Guide.
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek VigorTalk
Description
User Guide for Firmware
Operating System
User Guide
Version
2.6
Size Driver
497KB
File Name
1ecc6f5b70d47f7739ce32fef1bf954f200902260743521477-users--guide-v1.0.zip
Observations
1 Introduction 1
1.1 Brief Overview 1
1.2 Highlights 1
1.3 Front Panel LEDs and Rear Panel Interfaces 2
1.4 Packet Contents 3
2 Installation and Configuration 4
2.1 Connect VigorTalk to Your Phone and Network 5
2.1.1 With General ADSL Router 5
2.1.2 With Enthernet-based Cable or DSL Modem 6
2.2 Configure VigorTalk Web GUI 7
2.2.1 System Information 7
2.2.2 LAN 9
2.2.3 Voice 11
2.3 Configure Your VigorTalk via Phone Key Pad 13
The VigorTalk Analog Telephone Adapter(ATA) is an international-recognized SIP
standard compliance that helps to migrate legacy analog telephones, analog conference
speakerphones, and fax machines* to modern IP devices and delivers feature-rich
carrier-class-clear Voice over IP service to small-businesses and residences. The
VigorTalk ATA enables customers to extend their investment by leveraging the existing
cable or DSL Internet connection for lower Internet phone rates and all of the other
available special features from their service provider, such as Caller ID, Call Waiting etc.
With easy-installation for end users and easy-provision/maintenance for service
providers, the VigorTalk ATA has the capabilities to be large-scale deployed, remote
managed, and dynamic software upgrades by service provider to offer customized
services to the users.
To interface between telephones and LAN, the VigorTalk ATA features one standard
telephone port for connection to the existing phones or fax machines* and one
10/100Base-T Ethernet port for connection to Internet via router/modem. Besides
embedded WebGUI for complex advanced configuration, The VigorTalk ATA also
provides complementary built-in Interactive Voice Response(IVR) system to enable end
users to quick basic setup via key pad.
VoIP
-Protocol
SIP(RFC3261), RTP/RTCP
-G.168, G.165 Line Echo-cancellation
-Gain Control
-Voice Codecs:
G.711 A/µ law ; G.729 A/B
-Voice Feature:
VAD??Voice Activity Detection??
CNG??Comfort Noise Generation??
Dynamic Jitter buffer
-DTMF Generation and Detection
-Packet Loss Concealment
-Caller ID??Bell core, ETSI FSK mode??
-FXS interface
Networking Features
-DHCP client??RFC 2131??/PPPoE
/Static IP /PPTP
-Automated NAT traversal??STUN,
RFC3489??
Management
-Web-based User Interface
-Firmware upgrade via TFTP??RFC
1350??
-Convenient Internet Access Profiles
-Telephone Keypad Configuration
-Auto provision
Access to Official Website Draytek
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.