Available 18 files for Asrock K8S8X
Select Files
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios Support K8 754pin Semprom 3300+ Rev.D CPU.
Operating System
MS-DOS
Version
2.00
Size Driver
440KB
File Name
k8s8x(2.00).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios Support K8 754pin Semprom Rev.E CPU.
Operating System
MS-DOS
Version
2.10
Size Driver
444KB
File Name
k8s8x(2.10).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios After clearing CMOS, system can boot up correctly.
Operating System
MS-DOS
Version
1.50
Size Driver
320KB
File Name
k8s8x(1.50).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios Fine tuned memory sizing code.
Operating System
MS-DOS
Version
1.90
Size Driver
324KB
File Name
k8s8x(1.90).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios First released.
Operating System
MS-DOS
Version
1.30
Size Driver
322KB
File Name
k8s8x(1.30).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios 1. Support AMD Sempron 3100+ CPU. 2. Clear CMOS jumper should be working correctly. 3. Fan speed lower than 1400 rpm can be detected in the BIOS setup. 4. Options of CPU multiplier and voltage were added in the BIOS setup.
Operating System
MS-DOS
Version
1.70
Size Driver
322KB
File Name
k8s8x(1.70).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios 1. Support Version D CPU. 2. Change SATA option ROM to version 1.05.
Operating System
MS-DOS
Version
1.80
Size Driver
324KB
File Name
k8s8x(1.80).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios 1. MA timing option should be available if 3000+ CG. version CPU is installed. 2. CPU Cool 'n' Quiet function should be working if CG. version CPU is installed.
Operating System
MS-DOS
Version
1.60
Size Driver
320KB
File Name
k8s8x(1.60).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
Bios 1. MAC address of On-board LAN can be updated correctly by SiS EE.EXE utility. 2. Windows XP can be installed correctly if USB Legacy Support is enabled in the BIOS setup.
Operating System
MS-DOS
Version
1.40
Size Driver
320KB
File Name
k8s8x(1.40).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
SATA RAID Driver
Operating System
Windows 2000-XP-XP 64bit-Vista-Vista 64bit
Size Driver
1MB
File Name
floppy_vista64_vista(9.23)xp64_mce_xp_2k(6.92).zip
Observations
(For system to read from floppy diskette during Windows installation)
SATA RAID Driver Installation Guide
SATA RAID Driver is for users who plan to install Windows OS on SATA / SATAII HDDs with RAID functions. To use RAID functions, you need to make a SATA RAID Driver floppy diskette before you install the operation system, such as Windows XP. If you do not plan to use RAID functions, it is not necessary to make a SATA RAID Driver floppy diskette. Please follow below steps for the usage of SATA RAID Driver:
Copy the SATA RAID Driver from our website to your SATA HDDs. Unzip it, and copy all the files and folders to an empty diskette.
Make sure that the “SATA Operation Mode” option in BIOS setup is set to RAID mode.
Install Windows OS to your system. At the beginning of Windows setup, please press F6 and insert the SATA RAID Driver floppy diskette you just made. Then you are allowed to select the required driver to install after your system reading the SATA RAID Driver floppy diskette.
After Windows OS installation, use the RAID tool in our support CD to configure RAID arrays under BIOS or Windows environment.
For the details of RAID operation procedures, please refer to our user manual in the support CD or quick installation guide for further information.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
SiS USB 2.0 driver
Operating System
Windows 98-Me
Version
1.04
Size Driver
261KB
File Name
usb_me_98(104).zip
Observations
The USB 2.0 drivers support for Microsoft Windows XP
USB 2.0 drivers are provided in Service Pack 1 (SP1) for Windows XP,
which is available through Windows Update http://windowsupdate.microsoft.com/ .
The USB 2.0 drivers support for Microsoft Windows 2K
USB 2.0 drivers are provided in Service Pack 4 (SP4) for Windows 2K,
which is available through Windows Update http://windowsupdate.microsoft.com/ .
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
AMD Cool'n'Quiet driver
Operating System
Windows 98-Me-2000
Version
4.0.100.1190
Size Driver
2.6MB
File Name
2k_me_98(4.0.100.1190).zip
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
SiS AGP driver
Operating System
Windows 98-Me-2000-XP
Version
1.17
Size Driver
5.2MB
File Name
agp_xp_2k_me_98_755(1.17).zip
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
C-Media AC97 audio driver
Operating System
Windows 98-Me-2000-XP
Version
UDA038_build03L
Size Driver
20.2MB
File Name
c-media_xp_2k_me_98(uda038_build03l).zip
Observations
C-Media AC97 Play3D Demo Release Note
//====================
//Ver 002 2003/02/19 Start
//===================
1.add press image into Stop button
2.when stop or change path mode,the ball will back to default position
3.Enviroment effect only work during this application
4.Add Doppler Effect (limit to helicopter sound source)
5.when add tooptip into dlg,change to ID from 0 to 101
6.exe file change to CmiPlay3D.exe
7.Check DSound work normally or not
8.change icon
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
RAID Driver/Utility
Operating System
Windows 98-Me-2000-XP
Version
105
Size Driver
3.9MB
File Name
sata_xp_2k_me_98(1.05).zip
Observations
SiS180 IDE/RAID Controller Driver Package [V1.05]
1. Windows XP driver, Windows 2000 driver and Windows ME driver certified by
WHQL as for logo driver.
2. Submission ID
SiS RAID driver for Windows XP Submission ID: 746150
SiS RAID driver for Windows 2000 Submission ID: 746152
SiS RAID driver for Windows ME Submission ID: 746356
3. Driver Version/Modification/Bug Fixed
[Windows XP driver v1.05]
Filename Date Driver Version
sisraid.sys 12/09/2003 5.1.1039.1050
- Fix 48bit LBA HDDs support issue under RAID 0+1 configuration.
[Windows 2000 driver v1.05]
Filename Date Driver Version
sisraid.sys 12/09/2003 5.0.1039.1050
- Fix 48bit LBA HDDs support issue under RAID 0+1 configuration.
[Windows ME driver v1.05]
Filename Date Driver Version
sisraid.mpd 12/05/2003 5.0.1039.1050
- Fix 48bit LBA HDDs support issue under RAID 0+1 configuration.
4. SiS RAID Utility Version/Modification/Bug Fixed
[RAID Utility v0.76]
Filename Utility Version
sisraid.exe 0.7.6.0
- Fix the “ESC” key entering will cause application disappear.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
SiS PCI Lan driver
Operating System
Windows 98-Me-2000-XP
Version
1.16b
Size Driver
10.4MB
File Name
lan_xp_2k_me_98(1.16b).zip
Observations
Note for using this Setup Utility
---------------------------------
For Windows 98/98SE/ME/2000/XP:
--------------------------------
Install the driver with "setup" or "setup -s" command:
1. setup: The Install shield will prompt you the steps to install
the driver.
2. setup -s: The Install shield will complete the installation
without prompting you any instruction.
--------------------
For Windows 95/OSR2:
--------------------
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.
2. Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.
b) setup -s: The Install shield will complete the installation
without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. After remove the driver, please restart the system immediately.
-----------------------
For Windows NT 3.5x/4.0
-----------------------
Do not use this utility in Windows NT 3.5x or 4.0.
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
AMD Cool'n'Quiet driver
Operating System
Windows XP
Version
1.1.0.18
Size Driver
4.2MB
File Name
xp(1.1.0.18).zip
Company
Asrock
Categories
Motherboards
Serie
Asrock AMD Serie
Model
Asrock K8S8X
Description
User Manual
Information
Manual
Operating System
Manual
Language Manual
English
Size Driver
511KB
File Name
k8s8x.pdf
Observations
Contents
1 Introduction ................................................... 5
1.1 Package Contents ..................................................................... 5
1.2 Specifications ............................................................................ 6
1.3 Motherboard Layout ................................................................... 8
1.4 ASRock I/O PlusTM ..................................................................... 9
2 Installation...................................................... 10
Pre-installation Precautions ................................................................ 10
2.1 CPU Installation ......................................................................... 11
2.2 Installation of CPU Fan and Heatsink ....................................... 11
2.3 Installation of Memory Modules (DIMM) .................................... 12
2.4 Expansion Slots (PCI and AGP Slots) ....................................... 13
2.5 Jumpers Setup ........................................................................... 14
2.6 Onboard Headers and Connectors ............................................ 15
2.7 Serial ATA (SATA) Hard Disks Installation .................................. 18
2.8 Making An SATA Driver Diskette ............................................... 19
3 BIOS SETUP UTILITY ........................................... 20
3.1 Introduction ................................................................................ 20
3.1.1 BIOS Menu Bar ................................................................ 20
3.1.2 Navigation Keys ............................................................. 21
3.2 Main Screen ............................................................................... 21
3.3 Advanced Screen ....................................................................... 22
3.3.1 CPU Configuration ........................................................... 22
3.3.2 IDE Configuration ........................................................... 23
3.3.3 Floppy Configuration ...................................................... 25
3.3.4 Super IO Configuration ................................................... 25
3.3.5 Hardware Health Configuration ....................................... 26
3.3.6 ACPI Configuration ......................................................... 27
3.3.7 USB Configuration .......................................................... 28
3.4 PCIPnP Screen .......................................................................... 29
3.5 Boot Screen ............................................................................... 29
3.5.1 Boot Setting Configuration ............................................... 30
3.5.2 Boot Device Priority ......................................................... 30
3.6 Security Screen ......................................................................... 31
3.7 Chipset Screen .......................................................................... 31
3.7.1 North Bridge Configuration ............................................... 32
3.7.1.1 Memory Configuration ....................................... 32
3.7.2 South Bridge Configuration .............................................. 33
3.7.3 AGP Configuration ........................................................... 34
3.7.4 HyperTransport Configuration .......................................... 35
3.8 Exit Screen ................................................................................. 36
Access to Official Website Asrock
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.