Available 15 files for D-Link DFE-530TX
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Datasheet
Information
Manual
Operating System
Manual
Size Driver
331KB
File Name
dfe-530tx.pdf
Observations
10/100Mbps PCI Card for PC
D-Link's DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100Mbps dual-speed adapter for the PCI
bus. Installable in a Pentium or Pentium Pro PC equipped with PCI expansion slots, this adapter turns a desktop into a highbandwidth
graphic/multimedia workstation or a power server running at full-duplex speed.
Powerful Performance Auto-sensing 10/100Mbps Interface
Full Duplex Support
Easy Migration
Network Security Comprehensive Driver Support
The adapter operates in the 32-bit Bus Master mode, delivering The adapter's single connector connects to either 10BASE-T
throughputs at multi-megabits per second with little stress on the Ethernet or 100BASE-TX Fast Ethernet completely without any
host's CPU. Supporting PCI clock speeds independently of the need to set configuration. It detects the connected hub's or switch's
network clock, it transfers data directly to/from the host's memory, capability and auto-negotiates to use the highest available speed.
by-passing the CPU to alleviate the host's workload.
Full/half duplex operation is auto-detected in both 10BASE-T and
The adapter allows users to migrate from Ethernet to Fast Ethernet 100BASE-TX modes. When connected to a switch in full duplex,
in easy steps. 10BASE-T users can upgrade to 100BASE-TX the network speed can be increased to 200Mbps, making the
anytime without changing driver software or network cables. adapter an ideal NIC for high-speed server deployment.
Network administrators can install optional boot ROMs on the The adapter supports all major network operating systems,
adapters to implement network security. Diskless workstations including NetWare, Windows and Linux.
equipped with these ROMs can remote boot from NetWare or
Windows NT servers and access authorized data.
Key Features
10/100Mbps NWay interface Full duplex supported for both 10BASE-T, 100BASE-TX
32-bit PCI bus master operation Remote boot supported
Low Ethernet command processing overhead Easy-to-view diagnostic LEDs
Single shielded RJ-45 connector Simply Plug and Play
UTP and STP supported Complete driver support
Support IEEE 802.1x Port-based Network
Access Control (MD5 only)
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Manual
Information
Manual
Operating System
Manual
Size Driver
527KB
File Name
dfe-530tx_man.pdf
Observations
INTRODUCTION..............................................................1
System Requirements......................................................1
Features ...........................................................................1
INSTALLATION...............................................................3
Unpack and Inspect..........................................................3
Software Installation .........................................................3
Installing the Adapter........................................................4
Connecting the Network Cable ........................................4
TROUBLESHOOTING.....................................................5
SPECIFICATIONS ...........................................................6
Before installing the DFE-530TX, check your system for the following minimum configuration
requirements.
?? One of the following slot types:
• An open PCI bus master slot, 32-bit, operating at 33MHz.
?? 32 MB of System Memory
?? 150 MHz processor, or faster
?? The latest BIOS for your computer
?? One of the following types of twisted-pair network cabling:
• Category 5 or better for 100Mbps
• Category 3, 5 or better for 10Mbps
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
728KB
File Name
dfe-530tx_qig_2.00(e).pdf
Observations
Installing the DFE-530TX Drivers
A. Insert the driver CD, which is included with the DFE-530TX, into the CD-ROM of your
computer.
B. Choose the preferred language and click on “Install Drivers”. When prompted “Installation
Complete”, click OK. If prompted to restart (for Microsoft Windows 98/ME only), click “Yes”.
Installing the DFE-530TX into the computer’s PCI slot
A. Power off your computer and disconnect the power cord.
B. Remove the back cover of your computer. (Refer to your computer’s manual if needed.)
C. Locate an available PCI slot. PCI slots are usually white or cream coloured.
D. Remove the back plate (the small piece of metal that covers the opening for the PCI card
on the back cover that you just removed.)
E. Insert the DFE-530TX carefully and firmly into the PCI slot.
F. Secure the DFE-530TX with the screw from the back plate.
G. Replace your computer’s cover.
Finishing the Installation
A. Reconnect the power cord and power on the computer.
B. Windows should automatically detect and install the adapter.
C. If prompted to restart (for Microsoft Windows 98/ME only), click “Yes”.
Troubleshooting
1. If I’ve lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support below). Windows 2000 or XP in most cases will automatically install the
correct drivers.
2. What do I do if the installed card does not seem
to function properly?
• Check that the card appears under
START>CONTROL PANEL>SYSTEM
>HARDWARE>DEVICE MANAGER
>NETWORK ADAPTERS.
• If it does not appear, make sure you have inserted
the PCI card correctly or try inserting the card into
an alternative PCI slot.
• If it appears with an error “!” or “?”, remove or
uninstall the device by right clicking on the device.
Restart the computer, upon restart Windows will
redetect it. If error persists, try removing the card
and uninstalling the driver. Repeat the installation
process.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Driver v10
Operating System
Software
Version
10.00
Size Driver
17.8MB
File Name
dfe-530tx_c2_driver_v10-00.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter
Contents
--------
- Introduction
- Getting Started
- Revision History
- Trouble shooting
- Support Options
- Copyrights and Trademarks
Introduction
------------
Thank you for purchasing the D-Link DFE-520TX PCI Fast Ethernet adapter.
This CD-R driver support for the D-Link DFE-520TX PCI Fast Ethernet adapter
(support 10M/100M PCI).
This driver contains many kinds of Network Operating System
installation . Please refer to the readme file or user's guide
if any problems for installation, or please freely contact
our technical support.
You can get latest releases of drivers from D-Link's Web site
(http://www.dlink.com). We hope our new readmes and installations
will minimize the users effort to make our products work. Should there
be further recommendations please contact the support manager at the
local D-Link Office listed bellow.
Getting Started
---------------
Auto-run program assist your ease of setup. It will configure
driver, install appropriate network drivers for popular network
operating systems on the DFE-530TX adapter.
You can operate some function through the friendly button:
1.Install Driver: It will configure driver, install appropriate
network drivers for popular network operating systems on the
DFE-530TX adapter.
2.View Quick Installation Guide: It will show Quick Installation Guide
for your reference.
3.View manual: It will show detail manual for your reference.
4.Install Adobe Acrobat Reader: The QIG and Manual are in Adobe .PDF format.
If you do not have a .PDF viewer install on your system, install Adobe Acrobat
Reader to view these file.
5.Visit support.dlink.com: Please see the detail of our local branch office and
contact our customer service window.
6.Exit: You can exit Window by this button.
If the NOS (Network Operating System) you are using is not covered
by the auto-run program, please refer to the individual documentation
provided in INFO directory.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Drivers for Windows and Netware
Operating System
Software
Size Driver
3.2MB
File Name
dfe-530tx_drv_aug03.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter
Contents
--------
- Introduction
- Getting Started
- Revision History
- Trouble shooting
- Support Options
- Copyrights and Trademarks
Introduction
------------
To help your friendly installation, you can check it from the
readme files of INFO directory. Should there be any further
recommendations, please contact with the Local D-Link office listed
as below.
Getting Started
---------------
Auto-run program assist your ease of setup. It will configure
driver, install appropriate network drivers for popular network
operating systems on the DFE-530TX adapter.
You can operate some function through the friendly button:
1.Install Driver: It will configure driver, install appropriate
network drivers for popular network operating systems on the
DFE-530TX adapter
2.User's manual: It will show detail manual for your reference.
3.Go to D-Link Web:You can find other information in our Web and contact
with us.
4.Explore CD :It will allow you to explore the CD.
5.Close Window:You can close Window by this button.
If the NOS (Network Operating System) you are using is not covered
by the auto-run program, please refer to the individual documentation
provided in INFO directory.
Revisions History
Diskette revision: 20030701
----------------------------
-- Support Windows Server 2003.
-- Support NetWare 6.5.
-- Update all drivers.
Diskette revision: 20030101
----------------------------
-- Support 802.1x supplicant.
-- Support Win Diagnostic,DOS Diagnostic.
-- Add INFO directory.
-- Windows 98/ME/2000/XP passed PC99 logo certification.
Diskette revision: 20020701
----------------------------
-- Support DFE-530TX A1/A3/B1/B2/C1 adapters.
-- It supports the following drivers:
--Novell NetWare 3.x, 4.x,5.x,6.x and ODI.DOS.
--Microsoft Windows NT3.51, NT4.0.
--Windows 95/95OSR2, 98/98SE/Me,2000/XP.
--Microsoft Windows for Workgroups 3.11.
--Microsoft Client for DOS.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Driver for Linux
Operating System
Software
Size Driver
56KB
File Name
dfe-530tx_drv_linux_dlkfet_4_24.zip
Observations
The instructions listed below are for linux driver installation. You must
compile the source code to generate rhinefet.o and use insmod command to
insert rhinefet.o as module.
Contents of the Subdirectory:
=============================
linux.txt This file.
rhine_main.c The linux core driver source code file
rhine_proc.c The linux core driver source code file
rhine_wol.c The linux core driver source code file
rhine_drv.h The linux core dirver header file
rhine_wol.h The linux core driver header file
rhine_proc.h The linux core driver header file
rhine.h The linux core driver header file
Makefile Makefile for generating driver object file
rhine_vmns.c The vmns driver support source file
rhine_vmns.h The vmns driver support header file
rhine_cfg.h The vmns driver support header file
kcompat.h The linux core driver header file
Kernel Supported
================
This driver support linux kernel version 2.2.x and 2.4.x now.
Installation
============
Please enter the following commands at the UNIX prompt. Remember, UNIX is
case sensitive.
1) Create a temporary directory:
mkdir /temp
2) Change to the temporary directory:
cd /temp
2) Copy driver (dlkfet-4.24.tar.gz) from released CD, (If you didn't mount
CD drive before, you can type
'mkdir /cdrom'
'mount -r -t iso9660 -o conv=auto /dev/cdrom /cdrom' and use
'cp /cdrom/LINUX/dlkfet-4.24.tar.gz /temp'
command to copy the driver to the temporary directory):
cp /
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Driver for SCO Unix
Operating System
Software
Size Driver
80KB
File Name
dfe-530tx_drv_sco_unix.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
10/100Mbps PCI Card for PC Driver for Unixware
Operating System
Software
Size Driver
29KB
File Name
dfe-530tx_drv_unixware_21.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter
Operating System
Win 95-98-98Se-Me-2000
Version
v2.29.04
Size Driver
76KB
File Name
dlink_dfe530tx.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Windows 98
Getting Started
---------------
The Windows 98 installation disks or CD are need to complete this
install.
Windows 98 Installation Procedure
---------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Floppy disk drivers." and press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Windows 98 Installation Procedure for NDIS5 driver
--------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Specify a location" and specify the path (A:\WIN98),
then press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Trouble Shooting
----------------
1. Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter Rev A
Operating System
Windows 2000
Version
2.52
Size Driver
24KB
File Name
dlink_dfe530_20011015_2k.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Windows 2000
Getting Started
---------------
The Windows 2000 installation CD are needed to complete this
installation. The driver of DFE-530TX rev.A adapter had been
supported on Windows 2000 RC2 or later. If you are DFE-530TX
rev.A3/B user. Please following the steps below.
Windows 2000 Installation Procedure
-----------------------------------
1. Make sure your computer is power-off.
2. Plug the adapter into one PCI slot of your computer.
3. Turn on the power. Your computer should be booting.
4. Windows 2000 will find new hardware, and
"Found New Hardware Wizard" will appear.
5. Insert the driver diskette into the floppy disk, and
press "Next", and "Next" again in the following windows.
6. Select "Specify a location" in the checkbox, and press "Next"
to continue.
7. In the following dialog box, specify the directory of the driver
files. For example:
A:\ (A: is floppy drive, for rev.A1/A3/B1)
or
A:\PC99\WIN2000 --> for rev.A1/B1, B1 passed PC99 LOGO
and then click "OK".
8. The wizard should found the driver now. Follow the direction
to complete installation.
9. After finishing the installation, there should be a new
'Local Area Connection' will appear and the LAN card should works now.
Trouble Shooting
----------------
- Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
"My Computer" -> "Control Panel" -> "System"
-> "Network Identification"
- Everything appears to be OK but network adapter still doesn't
function properly. Please make sure that the adapter is properly
connected to a network device (ex: HUB) and the "connection type"
for this adapter is set to "AutoSense" or the correct media type.
To check the media type setting, you should start 'Device Manager'
in
"My Computer" -> "Control Panel" -> "System"
In the 'Device Manager', you can find the adapter in 'Network adapters'.
Open the adapter's property and select "Advanced" item. You can find
the connection type setting.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter Rev A
Operating System
Windows 95
Version
v2.29.04
Size Driver
22KB
File Name
dlink_dfe530_b1_95.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter Rev A
Operating System
Windows 95-98
Size Driver
24KB
File Name
dlink_dfe530_20011015_9x.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Windows 95, Windows 95 OSR2
Getting Started
---------------
The Windows 95, Windows 95 OSR2 installation CD are need to
complete this install.
Windows 95 OSR2 Installation Procedure
----------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new hardware has been found.
3. Insert the driver diskette into floppy disk.
4. The system detect the necessary driver will being
install for the new hardware.
5. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
6. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Windows 95 Installation Procedure
---------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new hardware has been found.
3. In the "New Hardware Found" winodw, choose
"Driver from disk provided by hardware manufacturer" item.
Then click on "OK" button.
4. Insert release driver diskette into the floppy disk drive.
5. In the "Install From Disk" window, specify the path of the driver.
Example:
A:
Then click on the "OK" button.
6. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
7. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Trouble Shooting
----------------
1. Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter Rev A
Operating System
Windows 98-98Se-Me
Version
v2.29.04
Size Driver
21KB
File Name
dlink_dfe530_b1.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Windows 98, Windows 98 SE
Getting Started
---------------
The Windows 98, Windows 98 SE installation CD are need to
complete this install.
Windows 98, Windows 98 SE Installation Procedure
------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Floppy disk drivers." and press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Windows 98, Windows 98 SE Installation Procedure for NDIS5 driver
------------------------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Specify a location" and specify the path (A:\WIN98),
then press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Trouble Shooting
----------------
1. Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
"My Computer" -> "Control Panel" -> "Network" -> "Identification"
icons
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter Rev A
Operating System
Windows 98Se-Me
Version
2.52
Size Driver
24KB
File Name
dlink_dfe530_20011015_se.zip
Observations
D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Windows 98, Windows 98 SE
Getting Started
---------------
The Windows 98, Windows 98 SE installation CD are need to
complete this install.
Windows 98, Windows 98 SE Installation Procedure
------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Floppy disk drivers." and press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Windows 98, Windows 98 SE Installation Procedure for NDIS5 driver
------------------------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found. Press "Next" to be continue.
3. Insert the driver diskette into floppy disk.
4. Select "Search for the best driver for your device [Recommanded]".
5. Check "Specify a location" and specify the path as following,
A:\WIN98 --> for DFE-530TX.A1/A3/B1 work on both 98 and 98SE.
or
A:\PC99\WIN98SE --> for DFE-530TX.A1/B1, B1 passed PC99 LOGO
then press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Trouble Shooting
----------------
1. Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-530TX
Description
PCI Fast EtherNet Adapter Rev A
Operating System
Windows Me
Version
2.52
Size Driver
24KB
File Name
dlink_dfe530_20011015_me.zip
Observations
Getting Started
---------------
The Windows Me installation CD are need to complete this install.
Windows Me Installation Procedure for NDIS5 driver
(for rev. A1,B1 card)
--------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that "a new Hardware found" hardware has
been found and the system will auto install driver.
3. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
Windows Me Installation Procedure for NDIS5 driver
(for rev. A3 card)
--------------------------------------------------
1. Plug PCI Ethernet adapter into the system.
2. Start your PC normally. Upon power up, the system will
indicate to you that new "PCI Ethernet Controller" hardware has
been found.
3. Insert the driver diskette into floppy disk.
4. Check "Specify a location of the driver[Advanced]" pass "Next"
and specify the path as following,
A:\PC99\WINME --> for DFE-530TX.A1/A3/B1, B1 passed PC99 LOGO
then press "Next".
6. The system detect the necessary driver will being
install for the new hardware.
7. After finishing file copying, the Windows system will ask
you to restart the system. Select YES to reboot.
8. During system boot up, the operating system will automatically
detect the PCI Fast Ethernet adapter and install the driver for
the adapter.
Trouble Shooting
----------------
1. Everything is OK in Device Manager, but network adapter still
does't function properly. Please make sure that your Computer
name is different from others in the same network. You can change
your Computer name in
"My Computer" -> "Control Panel" -> "Network" -> "Identification"
icons
2. Everything appears to be OK but network adapter still doesn't
function properly. Please make sure that the adapter is properly
connected to a network device (ex: HUB) and the "connection type"
for this adapter is set to "Auto-negotiation" or the correct
media type. You can check it in "My Computer" -> "Control Panel"
-> "Network" -> "Properties" icons. Select "Advanced" item.
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.