Available 5 files for D-Link DFL-1100 Revision A
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1100 Revision A
Description
Network Security Firewall for Enterprise Firmware
Operating System
Firmware
Version
133
Size Driver
4MB
File Name
dfl-1100_fw_v1.33.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1100 Revision A
Description
Network Security Firewall for Enterprise Firmware
Operating System
Firmware
Version
1.34
Size Driver
2.3MB
File Name
dfl-1100_fw_v1.34.zip
Observations
DFL-1100 Summary of changes: ¤ Fixed minor issues with PPTP/L2TP ¤ Can now specify MAC for WAN interface DFL-1100 Firmware Release Notes
Firmware: 1.34.00
Enhancement
- Implementing H.323 ALG in DFL-700 and DFL-1100.
- Now possible to set the MAC address of the WAN interface manually. It should only be used if it is required by the ISP.
Bug fixes
- It was not possible to connect to the WebUI through a PPTP/L2TP tunnel
- The web browser could stall on some pages when using HTTP ALG
- HTTP ALG now allows compressed data. The HTTP ALG always asked the Web server not to send compressed data as this does not work with content stripping. The HTTP ALG will now allow the server to send compressed data as long as the HTTP ALG isn't configured to do content stripping.
- IDS triggered on packets that it shouldn't while using IXP hardware
Affects DFL-200
- IKE vulnerability: The IKE library was not performing sufficiently rigorous checks on the validity of IKEv1 packets received from the network.
- Telstra BigPond clients did not use the correct authentication server
- Make UTF-8 checks optional in the HTTP ALG
- The configuration file was not correctly parsed when configuring IDlist, ID type=IP
- Not possible to configure ID list, ID type=DNS
- Descriptions for factory reset updated
- Added a delay after downloading the new IDS signature database. Earlier
the firewall reconfigured immediately after a successful download.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1100 Revision A
Description
Network Security Firewall for Enterprise IPS Pattern List
Information
Software
Operating System
Manual
Version
1.00
Size Driver
73KB
File Name
dfl-200_700_800_1100_1600_2500_a1_ips_pattern_list_2005_0622.pdf
Observations
D-Link Corporation
DFL-200/700/800/1100/1600/2500
Network Security Firewall
IPS Pattern List
DFL-200/700/800/1100/1600/2500 Pattern List Revision History
Version Revised Date Author Description
1.0 2005/8/2 Merlin Shao Initial DFL-800/1600/2500 IPS Pattern List.
IPS Pattern List
No. Pattern Name
1 SHELLCODE sparc setuid 0
2 SHELLCODE x86 setgid 0
3 SHELLCODE x86 setuid 0
4 SHELLCODE SGI NOOP
5 SHELLCODE SGI NOOP
6 SHELLCODE AIX NOOP
7 SHELLCODE Digital UNIX NOOP
8 SHELLCODE HP-UX NOOP
9 SHELLCODE HP-UX NOOP
10 SHELLCODE sparc NOOP
11 SHELLCODE sparc NOOP
12 SHELLCODE sparc NOOP
13 SHELLCODE x86 NOOP
14 SHELLCODE x86 stealth NOOP
15 SHELLCODE x86 unicode NOOP
16 SHELLCODE Linux shellcode
17 SHELLCODE x86 inc ebx NOOP
18 SHELLCODE x86 NOOP
19 SHELLCODE x86 EB OC NOOP
20 ATTACK-RESPONSES Windows directory listing
21 ATTACK-RESPONSES successful gobbles sshutuptheo exploit
22 ATTACK-RESPONSES successful gobbles sshutuptheo exploit
23 ATTACK-RESPONSES command completed
24 ATTACK-RESPONSES command error
25 ATTACK-RESPONSES index of /cgi-bin/ response
26 ATTACK-RESPONSES Microsoft cmd.exe banner
27 EXPLOIT ssh CRC32 overflow /bin/sh
28 EXPLOIT ssh CRC32 overflow NOOP
29 EXPLOIT Netscape 4.7 client overflow
30 EXPLOIT nlps x86 Solaris overflow
31 EXPLOIT LPRng overflow
32 EXPLOIT Redhat 7.0 lprd overflow
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1100 Revision A
Description
Network Security Firewall for Enterprise Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
1.2MB
File Name
dfl-1100_installguide_101.pdf
Observations
Package Contents
• D-Link® DFL-1100 NETDEFEND™ Network Security Firewall
• CAT5 UTP Straight-Through Ethernet Cable
• CAT5 UTP Crossover Cable
• RS-232 Console Interface Cable
• CD-ROM (Containing Manual)
• Power Cord
System Requirements
• Computer with an Ethernet adapter and a Windows, Mac, or Unix based operating system.
• Internet Explorer or Netscape Navigator, version 6.0 or above, with JavaScript enabled.
Hardware Installation
1. Connect the power cord to the power connector on the rear panel of the DFL-1100. Plug the other end of the power
cord to a wall outlet or power strip.
2. Turn on the power switch on the rear panel of the DFL-1100. The Power LED will illuminate.
3. Power off your broadband modem. Some modems may not have an on/off switch and will require you to unplug the
power adapter.
4. Connect an Ethernet cable to the Ethernet jack of your broadband modem and then connect the other end of the
Ethernet cable to the WAN port on the front panel of the DFL-1100.
5. Power on the broadband modem. It may take a few seconds for your modem to initialize but then the WAN port LED
should illuminate to indicate a proper connection.
6. Connect an Ethernet cable to the LAN port on the front panel of the DFL-1100. Connect the other end of the Ethernet
cable to your network hub or switch. The LAN port LED should illuminate to indicate a proper connection.
7. Connect the computer that you will use to configure the DFL-1100 to the network hub or switch (if it isn’t already
connected). Be sure that the configuration PC is setup to obtain an IP address automatically. It may be necessary to
release and renew the IP address.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1100 Revision A
Description
Network Security Firewall for Enterprise IDS Pattern files
Operating System
Software
Version
660
Size Driver
18KB
File Name
ids-update-6_2005-06-03.zip
Observations
DFL-200/700/1100/800/1600/2500 IDS Pattern Release Note
IDS pattern: 2005_06_03
Pattern number : 660
Date: June 3, 2005
Description :
*Signatures that would always give false-positives have been removed.
Also some really old signatures (from like 1988) for programs that nobody
uses any more where removed. The removal of these old signatures will
increase the performance of the IDS/IDP engine.
* More descriptive log messages have been added to each signature.
The log message will now for example state the probable impact the
attack had.
* Some signatures where modified to cover a large attack surface. This will
result in higher performance of the IDS/IDP engine and the possibility that
signatures will catch new and undiscovered attacks.
* New and more updated attack signatures where added.
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.