Available 5 files for D-Link DFL-1600 Revision A3G
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1600 Revision A3G
Description
SoHo Network Security Firewall Firmware
Information
Manual
Operating System
Manual
Size Driver
828KB
File Name
dfl-800_1600_2500-user_authentication_for_web_access.pdf
Observations
Overview
In this document, the notation Objects->Address book means that in the tree on the left
side of the screen Objects first should be clicked (expanded) and then Address Book.
Most of the examples in this document are adapted for the DFL-800. The same settings can
easily be used for all other models in the series. The only difference is the names of the
interfaces. Since the DFL-1600 and DFL-2500 has more than one lan interface, the lan
interfaces are named lan1, lan2 and lan3 not just lan.
The screenshots in this document is from firmware version 2.11.02. If you are using an
earlier version of the firmware, the screenshots may not be identical to what you see on
your browser.
To prevent existing settings to interfere with the settings in these guides, reset the
firewall to factory defaults before starting.
Require user authentication for web access......................................................... 3
Require user authentication for web access
This scenario shows how to configure the firewall to require user authentication before
local users can browse the Internet. The user will automatically be redirected to the
login page if not already authenticated. In the end of this guide there is also an
explanation of an alternative set up - how to configure the firewall to use
authentication without the automatic redirection.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1600 Revision A3G
Description
SoHo Network Security Firewall Firmware
Information
Manual
Operating System
Manual
Size Driver
938KB
File Name
dfl-800_1600_2500-vlan_and_route_failover.pdf
Observations
How to configure VLAN and route failover
This example requires a DFL-1600 or 2500 to be fully implemented. Most settings can
however also be used on a DFL-210 or DFL-800.
Two tag based VLANs will be created on lan3, that connect to switch port with VLAN tag.
Details:
- From lan1, lan2 and lan3: HTTP, HTTPS and DNS connect to Internet via wan2.
- From dmz: inbound and outbound SMTP services connect to Internet via wan1.
- All internal nets can also access the Mail server in dmz.
- Only VLAN2 can access the FTP server in dmz.
- If anyone of the wan interfaces is disconnected, the traffic from that interface will be
redirected to the other wan interface.
1. Addresses
Go to Objects -> Address book -> InterfaceAddresses
Make sure the configured addresses match the following list, and add the objects that not
already exist. To add new objects, select IP address from the add dropdown, enter name
and address and click ok.
2. Ethernet interfaces
Go to Interfaces -> Ethernet.
Edit the wan1 interface to use the following settings.
In the General tab:
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1600 Revision A3G
Description
SoHo Network Security Firewall Product Image Preview
Information
Manual
Operating System
Manual
Size Driver
461KB
File Name
dfl-800_1600_2500-vpn_ipsec_server_for_netdefend.pdf
Observations
1. Create the pre-shared key first.
2. IPSec tunnel setting (general page): this is for remote clients to dial in
3. select the pre-shared key you created.
4. Enable the option shown below.
5. Choose the IKE and PFS at your will.
6. Disable this option shown below. This isn’t necessary for remote dial in clients.
7. Combine the ipsec and lan interface
8. create the necessary rule.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1600 Revision A3G
Description
SoHo Network Security Firewall Quick Installation Guide
Information
Manual
Operating System
Manual
Size Driver
1.1MB
File Name
dfl-800_1600_2500-vpn_pptp_server_for_remote_access.pdf
Observations
The user dial-up to firewall by Windows PPTP client software .
Dial-up user communicate with LAN1 of firewall
The logic of configuration
Create object for PPTP server IP address and IP address range
Create Authenticating database
Configure PPTP server
Create the IP rule for PPTP tunnel
Create object for PPTP server IP address and IP address range
•Click “Address” in Objects
•Key in the correspond IP address
Create Local Database for PPTP authentication
•Click “Local User Databases ” in User Authentication
•Key in the correct Username and Password
Create PPTP tunnel
•Click “PPTP/L2TP Servers ” in Interface
•Choose the correspond configuration
Create User Authentication Rules for PPTP tunnel
•Click “User Authentication Rules ” in User Authentication
•Choose the correspond configuration
•Enable Log setting and choose local user database
Create IP Rules for PPTP tunnel
•Click “IP Rules ” in Rules
•Choose the correspond configuration
•Enable Log setting
After all configuration, Click “configuration” on main menu bar
• Click “Save and Activate”
Company
D-Link
Categories
Networks Cards
Model
D-Link DFL-1600 Revision A3G
Description
NETDEFEND VPN Firewall 1600 Enterprise MIB file for firmware
Information
Manual
Operating System
Manual
Size Driver
566KB
File Name
dfl-800_1600_2500-wan_failover.pdf
Observations
WAN Failover
What is WAN Failover?
There are two WAN ports on this firewall.
You can use WAN Failover if you need redundancy to your Internet connection or
any other network.
How does is work?
You need to assign one WAN connection as the primary, which will route all traffic
when both links works.
If WAN1 connection drops, all traffic will be re-routed through the WAN2 port.
If WAN2 connection drops, all traffic will be re-routed through the WAN1 port.
The methods this firewall uses to detect a dropping connection are
- If link goes down (e.g. ethernet cable unplugged or gateway power failure)
- ARP Lookup
Setup
This example is a DFL-800 with two NAT routers, DSL-504T setup on two different
ADSL lines. It can be implemented on DFL-1600 and DFL-2500 as well, with various
different WAN connections.
We assume the routers are setup for Internet and that DHCP is enabled.
We assign WAN1 to be the primary connection; WAN2 should only be used if
WAN1 connection dropped.
Customize
Please note that the WAN ports can be setup as Static or PPPoE instead.
You can still use these setup instructions, after you setup your WAN ports for you
specific connections.
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.