Available 6 files for D-Link DGE-560SX

Company

D-Link

Categories

Networks Cards

Model

D-Link DGE-560SX

Description

Gigabit PCI-Express x4 1000BaseSX (LC) Adapter Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Version

v1.00

Size Driver

270KB

File Name

dge-560sx_qig_1.00.pdf

Observations

DGE-560SX
Gigabit Ethernet
1000BASE-SX(LC) PCIExpress
X4 Adapter

Introduction
This quick Installation guide gives step-by-step instructions for setting up the D-Link
Gigabit Ethernet 1000BASE-SX(LC) PCI-Express X4 Adapter. It provides a throughput
of up to 2000 Mbps in Full duplex mode. For more detailed information on the Adapter,
its specifications and making changes to the network, see the User Manual that is
included with your adapter.
Check Your Package Contents
If any items are missing, please contact your reseller.
DGE–560SX Gigabit Ethernet
1000BASE-SX PCI-E Adapter
CD-ROM (containing User Manual)
The DGE-560SX supports drivers for the following operating systems:
• Microsoft Windows 2000, 2000 server
• Microsoft Windows Server 2003
• Microsoft Windows Server 2003 x64 Edition
• Microsoft Windows XP
• Microsoft Windows XP x64 Edition
• Linux for Kernel 2.4.x, 2.6.x (please see User Manual for driver install
information.)

Hardware Installation
Before you start, make sure to turn off your computer and unplug the
power cord.
1. Shut down the computer and unplug the power cord.
2. Remove the chassis cover.
3. Insert the card into an empty PCI-Express slot.
4. Replace the computer chassis cover.
5. Reconnect the power cord and turn the computer on. If the BIOS section of
your computer is plug and play compliant, then at the power up the BIOS will
automatically recognize and configure any newly installed DGE–560SX
Adapter.

Installing the DGE-560SX Driver
1. Turn on the computer.
2. Insert the driver CD included with the DGE–560SX into the CD ROM.
3. For Windows OS, the screen shown below will appear automatically. Click
Install Driver and follow the instructions on the installation wizard. The
following drivers are supported:
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge any
static electricity before working with the DGE-560SX Ethernet Adapter.
3
• Microsoft Windows 2000, 2000 server
• Microsoft Windows Server 2003
• Microsoft Windows Server 2003 x64 Edition
• Microsoft Windows XP
• Microsoft Windows XP x64 Edition
To install the SNMP Agent, click Install SNMP Agent and follow the
instructions for installation. To view a separate document about the SNMP
Agent, click View SNMP Manual.

Company

D-Link

Categories

Networks Cards

Model

D-Link DGE-560SX

Description

Gigabit PCI-Express x4 1000BaseSX (LC) Adapter User's Manual

Information

Manual

Operating System

Manual

Version

v2.00

Size Driver

765KB

File Name

dge-560sx_manual_2.00(b).pdf

Observations

IMPORTANT INFORMATION............................................................................................................ 1
What’s New .............................................................................................................................................. 1
System Hardware Requirements ....................................................................................................... 1
Operating Systems Supported:................................................................................................................... 1
INTRODUCTION............................................................................................................................... 2
Summary of Features........................................................................................................................ 2
LED Indicators ................................................................................................................................... 2
INSTALLATION ................................................................................................................................ 3
Unpack and Inspect........................................................................................................................... 3
Software Installation ........................................................................................................................... 3
Connecting the Network Cable........................................................................................................... 4
Installing the Adapter......................................................................................................................... 4
D-Link Network Control Program ....................................................................................................... 4
Advanced Adapter Configuration ....................................................................................................... 8
TECHNICAL SPECIFICATIONS ....................................................................................................... 9
System Hardware Requirements
Before installing the DGE-560SX, check to be sure your system meets the following minimum requirements:
• Available PCI-Express (x4 or higher) card slot
• 64 MB of System Memory
• 150 MHz or faster processor
• The most recent BIOS version for your system
• In addition to these system requirements, the optical network interface requires a 850nm LC Fiber
Optical connector
Hardware Driver Compatability
To ensure optimal performance, it is recommended that you download the latest hardware drivers for all your
particular adapters from the manufacturer's web site.
It is recommended that you install the latest Service Packs and/or Hot Fixes from Microsoft prior to installing
D-Link PCI-Express Card Software. Refer to the Release Notes for the latest list of Service Packs and/or Hot
Fixes that are required.

Company

D-Link

Categories

Networks Cards

Model

D-Link DGE-560SX

Description

Gigabit PCI-Express x4 1000BaseSX (LC) Adapter Datasheet

Information

Manual

Operating System

Manual

Size Driver

1MB

File Name

dge-560sx.pdf

Observations

The D-Link DGE-560SX Fiber Gigabit PCI Express x4 Adapter is a high-performance network card that let businesses take advantage of the PCI Express (PCIe) slots of their servers to enhance network performance with fiber-optic connectivity. The adapter’s dedicated input/output (I/O) bandwidth PCIe ensures priority performance without bus sharing for Gigabit Ethernet connectivity in fiber-optic networks.
PCI Express Interface
The DGE-560SX PCI Express x4 adapter supports 2Gbps data addressing to increase higher throughput requirements from the adapter’s PC board to the server host. It provides unsurpassed robustness, reliability and performance, and is the optimum I/O connectivity solution for a wide spectrum of server, storage and system area networks (SAN). As the successor to the PCI and PCI-X interfaces, PCI Express bus architecture host serial bus eliminates many of the inefficiencies of parallel PCI and PCI-X architectures. With lower pin counts and lower power consumption requirements, the DGE-560SX PCI Express host bus adapter also reduces system level power requirements. PCI Express is backward compatible with PCI and PCI-X addressing, which allows all existing applications and Operating Systems to function unchanged.
Fiber-Optic Connection
Delivering network speed up to 2000Mbps (full-duplex) on the fiber-optic cable, the DGE-560SX adapter brings ample bandwidth to a server up to 550 meters away.

Company

D-Link

Categories

Networks Cards

Model

D-Link DGE-560SX

Description

Gigabit PCI-Express x4 1000BaseSX (LC) Adapter SNMP Agent

Operating System

Software

Size Driver

5.8MB

File Name

dge-560sx_snmp_agent.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DGE-560SX

Description

Gigabit PCI-Express x4 1000BaseSX (LC) Adapter Network Control Program

Operating System

Software

Size Driver

22MB

File Name

dge-560sx_network_control_program.zip

Observations

SetupCPAwin.txt created 27-Apr-2007

Readme File for SETUPCPAWIN.exe v5.60.4.3
This file contains
1 Overview
2 Required Files
3 Installation Instructions
4 Limitations
5 Troubleshooting

===========================================================

1 Overview
===========

The D-Link CPA Installer contains the CPA application.

This README file explains how to install the D-Link CPA
Installer on a machine running Windows 2000, Windows XP and
Windows Server 2003.
NOTE:
CPA can only be used with Windows 2000, Windows XP and
Windows Server 2003.
===========================================================

SetupCPAwin.txt created 09-Nov-2006

Readme File for SETUPCPAWIN.exe v6.15.3.3
D-Link Gigabit Ethernet Adapter family

This file contains
1 Overview
2 Required Files
3 Installation Instructions
4 Limitations
5 Troubleshooting

===========================================================

1 Overview
===========

The D-Link CPA Installer contains the CPA application.

This README file explains how to install the D-Link CPA
Installer on a machine running Windows XP x64 Edition and
Windows Server 2003 x64 Edition..

2 Required Files
=================

To install the D-Link CPA, the following file is required:

SetupCPAwin.exe

3 Installation Instructions
============================

NOTE:
To install the D-Link CPA make sure that you are logged in
as a user with administrative rights.

To install the CPA, proceed as follows:

1. Execute the setup file SetupCPAwin.exe .

2. Follow the instructions of the installation procedure.

Company

D-Link

Categories

Networks Cards

Model

D-Link DGE-560SX

Description

Gigabit PCI-Express x4 1000BaseSX (LC) Adapter Driver

Operating System

Windows 32/64bit-Linux

Version

2.00

Size Driver

15.2MB

File Name

dge-560sx_driver_v2.00.zip

Observations

D-Link DGE-560SX 1000BASE-SX(LC) PCI-Express X4 Adapter

Contents
--------
- Introduction
- Getting Started
- Revision History
- Copyrights, Trademarks, and Disclaimers

Introduction
------------
Thank you for purchasing the D-Link DGE-560SX PCI Express Gigabit Fiber Network Adapter.
This CD-R driver support for the D-Link DGE-560SX PCI Express Gigabit Fiber Network Adapter.
(support 1000BASE-SX(LC) PCI-Express).

This driver contains many kinds of Network Operating System installation.
Please refer to the readme file or users guide if any problems for installation,
or please freely contact our technical support.

You can get latest releases of drivers from D-Link's Web site (http://www.dlink.com).
We hope our new readmes and installations will minimize the user's effort to make our
products work. If there is any further recommendation please feel free to contact the
support manager at the local D-Link Office listed bellow.

Getting Started
---------------
Auto-run program assist your ease of setup. It will configure driver, install appropriate
network drivers for popular network operating systems on the DGE-560SX adapter.
You can operate some function through the friendly button:

1.Install Driver: It will configure driver, install appropriate network drivers
for popular network operating systems on the DGE-560SX adapter.

2.Install D-Link Network Control Program: It will install to the D-Link Network Control
Program for management.

3.Install SNMP Agent: It will install to the SNMP Agent for management.

4.View Quick Installation Guide(PDF): It will show you how to install the hardware.

5.View Manual(PDF): It will show detail manual for your reference.

6.View SNMP Manual(PDF): It will show SNMP manual of installation for your reference.

7.Install Acrobat Reader: You can install Acrobat Reader to read or print out your
user manual, and also many other applications.

8.View Your Local D-Link Support: Please see the detail of our local branch office and
contact our customer service window.

9.Exit: You can exit Window by this button.

If the NOS (Network Operating System) you are using is not covered by the auto-run program,
please refer to the individual documentation provided in each NOS directory.