Available 16 files for D-Link DGS-3324SRi
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Firmware
Operating System
Firmware
Version
4.20b11
Size Driver
3.7MB
File Name
dgs-3324sri_fw_v4-20b11.zip
Observations
DGS-3324SR / DGS-3324SRi Firmware Release Note
Firmware: 4.20-B11
Hardware: A1 & A2
Date: Dec 29, 2005
Problems Resolved:
1. Fix the problem when user configures SNTP and then click SNMP page in Web UI, the device will be entering exception mode.
2. Fix the problem when using "show config in NVRAM" command in CLI and "Save configuration" command in Web UI at the same time, the device will be entering exception mode.
3. Fix the problem when Switch receives lots of UDP broadcast packets (Dest. Port=3000) continuously, the whole Switch stack will reboot.
4. While showing the existing ACL rules in Web UI, the port information will be different as what user just configured, though it does operate as users configured.
5. Fix when "Static ARP" is configured by SNMP, it can't be deleted by CLI even reset system to default.
6. Improve the convergence time in RSTP mode.
7. Fix the problem when user forced the unit stacking ID = 1 but it's not stacking master, the port LED will become solid green and Switch will stop forwarding packets.
8. Fix the problem if user deletes one or some IP interfaces then reboot the system, the MAC address of IP interfaces will be changed.
9. Fix the security issues recently reported for unauthorized system access.
Enhancements:
1. CPU Interface Filtering (Software ACL)
2. Support non-IE browser (Netscape, Firefox, Opera, Mozilla)
3. Support remote upgrade of prom code
4. Add DEM-420CX(2-port CX4 Module) support
5. Support ACL auto-assign and portlist in SNMP interface
6. Limit the access by passwords generated by "D-Link PWD calculator". Before, if customers forgot their configured passwords, D-Link could generate passwords based on the MAC addresses provided by customers via D-Link HQ maintained PWD calculator. Thus customers can use those "backdoor" passwords via telnet/ web/ console to logon to their switch again. Now the access of those passwords generated by "D-Link PWD calculator" will be limited to console access only. This is to minimize the security concern.
Note: This is a recommended security patch for your customers.
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch PROM
Operating System
Firmware
Version
200b04
Size Driver
181KB
File Name
dgs-3324sri_prom_v2.00b04.zip
Observations
DGS-3324SR/SRi PROM 2.00B04:
For supporting "dual image" feature, addition to upgrade firmware to this 3.00B16 version,
PROM must be 2.00B04 (this file) or higher.
IMPORTANT: Please upgrade the firmware to 3.00B16 first and then upgrade the PROM
(Console, 115200, N, 8, 1) following the steps in the attached file.
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Firmware
Operating System
Firmware
Version
4.40b04
Size Driver
3.7MB
File Name
dgs-3324sr_dgs-3324sri_pxrun_v4.40.zip
Observations
DGS-3324SR /DGS-3324SRi Firmware Release Note
Firmware: 4.40-B04
Hardware: A1/A2/A3
Date: Aug. 31, 2006
Problems Resolved:
1. Fix static MAC address will be filtered when the "port lock" value in port security function = 0.
2. Fix device cannot get IP from DHCP server after rebooting the device even the DHCP configuration has been saved.
3. Fix the IGMP Snooping does not work "under jumbo IPMC data environment" issue.
4. Fix the PIM-SM "static RP" configuration will be lost after saving the configuration and reboot the device.
5. Fix DHCP relay function failed when stack master ID is not 1.
6. Fix LACP configuration across stack will fail after "reset system" and hot insert new box type of device.
7. Fix PC ping device will fail when there is SFP port's I2C component broken in the device.
8. Fix the device will show ping success even if received the reply with TTL expired.
Enhancements:
1. Enlarge the maximum RP support of PIM-SM from 10 to 40.
2. Add the MAC address format "AABBCCDDEEFF" support in the WEB UI.
Firmware: 4.30-B11
Hardware: A1/A2/A3
Date: Apr. 12, 2006
Problems Resolved:
1. Fix the problem when IP forwarding database is full, "show ipfdb" command cannot show information correctly.
2. Add an error checking mechanism when configuring “Port mirroring across stack” in Web UI. "Port mirroring across stack" is not supported.
Enhancements:
1. PIM-SM (single domain support)
2. Port Mirroring - ACL mode
3. Configurable RIP timer
4. Support extra 7 types (MX, NS, CNAME, AAAA, TXT, SOA, ANY) for DNS-Relay (Without cache and static function.)
5. Add one new log message when device detect damaged Mini GBIC inserted into SFP ports, Switch will point out the damaged port number in the log message for user debugging.
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Firmware
Operating System
Firmware
Version
4.10b15
Size Driver
3.7MB
File Name
dgs-3324sri_fw_v4-10-b15.zip
Observations
DGS-3324SRi 1 Fixed the per port ACL number issue 2 Fixed security risk on member switch in SIM
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Firmware
Operating System
Firmware
Version
4.30b11
Size Driver
3.7MB
File Name
dgs-3324sri_fw_v4-30-b11.zip
Observations
DGS-3324SRi Problems Resolved: 1 Fix the problem when IP forwarding database is full show ipfdb command cannot show infor
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch User's Guide v4.4
Information
Manual
Operating System
Manual
Size Driver
16.9MB
File Name
dgs_dxs-3300_series_user_guide_r4_4.pdf
Observations
Preface...................................................................................................................................................xi
Intended Readers ............................................................................................................................................................. xii
Typographical Conventions............................................................................................................................................................ xii
Notes, Notices, and Cautions........................................................................................................................................... xii
Safety Instructions.......................................................................................................................................................... xiii
Safety Cautions.............................................................................................................................................................................. xiii
General Precautions for Rack-Mountable Products ........................................................................................................................ xiv
Protecting Against Electrostatic Discharge..................................................................................................................................... xv
Introduction........................................................................................................................................... 1
Ethernet Technology ..........................................................................................................................................................1
Fast Ethernet..................................................................................................................................................................................... 1
Gigabit Ethernet Technology............................................................................................................................................................ 1
Switching Technology ...................................................................................................................................................................... 2
Switch Description............................................................................................................................................................................ 2
Features............................................................................................................................................................................................. 3
Ports.................................................................................................................................................................................................. 4
Installing the SFP ports ............................................................................................................................................................... 5
Front-Panel Components .................................................................................................................................................................. 5
LED Indicators ................................................................................................................................................................................. 6
Rear Panel Description ..................................................................................................................................................................... 7
Side Panel Description...................................................................................................................................................................... 8
Installation ............................................................................................................................................. 9
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Layer 3 network with DHCP/BOOTP Relay example
Information
Manual
Operating System
Manual
Size Driver
127KB
File Name
layer3-dhcp_relay.pdf
Observations
How do I setup a Layer 3 network with DHCP relay on my DGS-3324SR/
DGS-3324SRi/DXS-3350SR, and DXS-3326GSR?
Warning:
The example configuration below was created from a factory default configuration on the DGS-3324SR/DGS-3324SRi/DXS-
3350SR/DXS-3326GSR switches. We recommend saving your current configuration if necessary.
Scenario:
A large Layer 3 network may consist of quite a few IP subnets. Now, in order to make clients on the network easier to configure,
they can be set to use DHCP or ‘obtain an IP address automatically’ from a DHCP server. For this type of configuration, the DHCP
Relay function on the switch can be used. In this setup, there will only be one DHCP server handling the DHCP requests for each of
the subnets. The machines in Net1, Net2, or Net3 can obtain their IP addresses automatically from the primary DHCP server
(192.168.4.2), which resides in Net4. In this situation, the Layer 3 switch will receive the DHCP discover packet from the client and
will relay it to the DHCP Server and vice versa. The DHCP Server will then provide an IP address for the machine in the network
using correct DHCP scope. This configuration example is based on firmware version 4.10b15.
Switch CLI Configuration:
Step 1 Connect to the switch using the console connection with your preferred Terminal emulation software.
Step 2 Once connected to the CLI, login at the username and password prompt (The default is username is
is
Step 3 At the prompt, enter the following command:
reset system
Enter ‘y’ when prompted to confirm the factory reset. The switch will now reboot with the factory default settings.
Step 4 Login to the switch again.
Step 5 In the Switch CLI, enter the following commands to create the switch VLANs and related IP interfaces.
config vlan default delete 1:1-1:24
create vlan v101 tag 101
config vlan v101 add untagged 1:1-1:6
create ipif net1 192.168.1.254/24 v101 state enabled
create vlan v102 tag 102
config vlan v102 add untagged 1:7-1:12
create ipif net2 192.168.2.254/24 v102 state enabled
create vlan v103 tag 103
config vlan v103 add untagged 1:13-1:18
create ipif net3 192.168.3.254/24 v103 state enabled
create vlan v104 tag 104
config vlan v104 add untagged 1:19-1:24
create ipif net4 192.168.4.254/24 v104 state enabled
save
Step 6 Now that the basic Layer 3 configuration has been configured on the switch, we now need to enable BOOTP_RELAY and
configure the related settings. Enter the following commands in the CLI to configure and setup BOOTP_RELAY.
enable bootp_relay
config bootp_relay add ipif net1 192.168.4.2
config bootp_relay add ipif net2 192.168.4.2
config bootp_relay add ipif net3 192.168.4.2
save
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Datasheet
Information
Manual
Operating System
Manual
Size Driver
234KB
File Name
dgs-3324sri.pdf
Observations
24-Port Gigabit Stacking Master
Stacking Up 6 DGS-3224SR Switches
Built-in 24 Copper Gigabit Ports, 8 Combo SFP, 120Gbps Stacking &
Redundant Power Support
The DGS-3324SRi is a powerful, function-rich Layer 3 switch that acts as a Stacking Master, as well as a high port-density
Gigabit switch with 24 copper and fiber Gigabit connections. This switch operates as a high-performance external switching
fabric for D-Link's DGS-3224SR stackable switches by increasing the available stacking interconnect bandwidth from 20Gbps to
120Gbps.
Cost-Effective Backbone Stacking Master
Star Stacking Architecture
High Port-Density, High Performance
The DGS-3324SRi combines powerful stacking bandwidth
with Layer 3 packet routing and extensive network
management capability. It is suitable for deployment as a
cost-effective Stacking Master on a fiber backbone. The
DGS-3324SRi can provide as much as 120Gbps stacking
bandwidth to a stack of DGS-3324SR Layer 3 Gigabit
switches for fault tolerant connection to enterprise/
Departmental servers and workstations. The high availability
architecture of the DGS-3324SRi supports Layer 3 routing
(RIP-1/RIP-2, OSPF, and DVMRP), multi-layer traffic
classification/prioritization and optional redundant power.
DGS-3324SRi comes with 6 stacking ports operating in full
duplex, allowing 6 units of DGS-3324SR to be stacked
together in a fail-safe star architecture. You can add units to
reach maximum 168 Gigabit ports per stack. The switches
are stacked together through high-speed stack cables that
provide multiple Gigabit connections, allowing the entire
stack to perform as a single IP entity. Users can easily see
the ID number of switches stacked together from the 7-
segment display on the front panel of each switch.
In a low profile rack-mount box, the DGS-3324SRi gives
you 24 10/100/1000BASE-T Gigabit ports for 24 Gigabit
connections on your existing Cat. 5 twisted-pair cable. In
addition, it also gives you 8 SFP (mini GBIC) ports for
flexible fiber connection. You can select to install optional
transceiver modules in these slots for short, medium or longdistance
fiber backbone attachment. *
* Use of the SFP will disable their corresponding built-in 10/100/1000BASE-T connections.
Redundant Power Support
Wire-speed IP Routing
Seamless Integration
Port Trunks for Aggregated Bandwidths
Each switch in the stack can be connected to an external
power supply for redundant power backup purposes. In case
the built-in internal power supply fails, the redundant power
supply unit will automatically provide all required power to
ensure continuous operation.
The switch is designed for basic IP routing, with instant
support for Windows, Unix and Internet environments. It
provides wire-speed non-blocking switch fabrics with
hardware-based packet filtering/forwarding. Packet routing is
performed by on-board ASICs at speeds many times faster
than CPU-based routers.
The DGS-3324SRi can be instantly integrated into any
existing network for seamless integration of Layer 2 and Layer
3 packet switching. With multi-layer support for every port,
you can flexibly segment the network into domains and subdomains,
using (1) subnet IDs and user IP numbers to route
traffic, and (2) custom filters based on users' physical MAC
addresses to filter extraneous traffic. On Layer 2, the
DGS-3324SRi uses auto-learned and user-defined MAC
addresses to discard and forward packets to the L2 switch
stack. On Layer 3, the DGS-3324SRi looks at the userspecified
routing table to route packets to their destinations on
other L3 Stacking Masters on the fiber backbone.
Port trunks supporting 802.3ad Link Aggregation standard
allow up to 8 Gigabit ports to be combined together to create a
multi-link load-sharing aggregated bandwidth. The
DGS-3324SRi can support up to 32 port trunks per device.
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch CLI Reference Manual r4-3
Information
Manual
Operating System
Manual
Size Driver
1.6MB
File Name
dgs-3324sri_cli_manual_r4-3.pdf
Observations
Introduction..................................................................................................................................................................1
Using the Console CLI .................................................................................................................................................4
Command Syntax .........................................................................................................................................................8
Basic Switch Commands............................................................................................................................................10
Switch Port Commands .............................................................................................................................................26
Port Security Commands...........................................................................................................................................29
Network Management (SNMP) Commands..............................................................................................................32
Switch Utility Commands..........................................................................................................................................52
Network Monitoring Commands...............................................................................................................................58
Multiple Spanning Tree Protocol (MSTP) Commands .............................................................................................75
Forwarding Database Commands.............................................................................................................................88
Broadcast Storm Control Commands ........................................................................................................................97
QoS Commands ..........................................................................................................................................................99
Port Mirroring Commands ......................................................................................................................................110
VLAN Commands.....................................................................................................................................................114
Link Aggregation Commands..................................................................................................................................124
IP Commands (Including IP Multinetting) .............................................................................................................130
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Users Guide r4-3
Information
Manual
Operating System
Manual
Size Driver
25.7MB
File Name
dgs-3324sri_user_manual_r4-3.pdf
Observations
Preface...................................................................................................................................................xi
Intended Readers ............................................................................................................................................................. xii
Typographical Conventions............................................................................................................................................................ xii
Notes, Notices, and Cautions........................................................................................................................................... xii
Safety Instructions.......................................................................................................................................................... xiii
Safety Cautions.............................................................................................................................................................................. xiii
General Precautions for Rack-Mountable Products ........................................................................................................................ xiv
Protecting Against Electrostatic Discharge..................................................................................................................................... xv
Introduction........................................................................................................................................... 1
Ethernet Technology ..........................................................................................................................................................1
Fast Ethernet..................................................................................................................................................................................... 1
Gigabit Ethernet Technology............................................................................................................................................................ 1
Switching Technology ...................................................................................................................................................................... 2
Switch Description............................................................................................................................................................................ 2
Features............................................................................................................................................................................................. 3
Ports.................................................................................................................................................................................................. 4
Installing the SFP ports ............................................................................................................................................................... 5
Front-Panel Components .................................................................................................................................................................. 5
LED Indicators ................................................................................................................................................................................. 6
Rear Panel Description ..................................................................................................................................................................... 7
Side Panel Description...................................................................................................................................................................... 8
Installation ............................................................................................................................................. 9
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Switch Guide
Information
Manual
Operating System
Manual
Size Driver
210KB
File Name
l3_ge_switches_rev01.pdf
Observations
Managed L3 Gigabit Switches
Models DGS-3324SR DGS-3324SRi DXS-3350SR DXS-3326GSR DGS-3312SR
Description
24 1000BASE-T
with 4 combo SFP ports L3
Switch
24 1000BASE-T
with 8 combo SFP ports L3
Switch
48 1000BASE-T with 4 combo
SFP ports and one expansion
slot for 2-port 10GE XFP
uplink module L3 Switch
24 SFP with 4 combo
1000BASE-T ports and one
expansion slot for 2-port
10GE XFP uplink module L3
Switch
4 Combo 1000BASE-T & SFP
ports and 2 expansion slots
L3 Switch
Stackable Yes (Up to 12 devices) Yes (Up to 7 devices) Yes (Up to 12 devices) Yes (Up to 12 devices) No
Stacking bandwidth 40Gbps [Ring], 120Gbps [Star] 120Gbps 40Gbps [Ring], 120Gbps
[Star]
40Gbps [Ring], 120Gbps
[Star] -
Stacking topology Ring;
Or Star with DGS-3324SRi Star Ring;
Or Star with DGS-3324SRi
Ring;
Or Star with DGS-3324SRi -
Combo style Either 4 1000BASE-T or SFP Either 8 1000BASE-T or SFP Either 4 1000BASE-T or SFP Either 4 1000BASE-T or SFP Either 4 1000BASE-T or SFP
Optional 10Gbps XFP Uplink
Capability No No Yes Yes No
Switching Capacity 88Gbps 168Gbps 176Gbps 128Gbps 24Gbps
64-byte Packet Forwarding rate 65.5Mpps 125Mpps 131Mpps 95Mpps 17.9Mpps
MAC address 16K 16K 16K 16K 16K
Jumbo Frame Support Yes (9216Bytes) Yes (9216Bytes) Yes (9216Bytes) Yes (9216Bytes) 9K
Packet buffer 2MB 2MB 4MB 2MB 1MB
Flash Memory 16MB 16MB 16MB 16MB 6MB
L2 Features
IGMP snooping Yes Yes Yes Yes Yes
802.1D Spanning tree Yes Yes Yes Yes Yes
802.1w Rapid Spanning Tree Yes Yes Yes Yes Yes
802.1s Multiple STP Yes (RII) Yes (RII) Yes Yes Yes (RIII)
802.3ad Link Aggregation
[ports per group/groups per device]
Yes
32 groups; 8 ports per group
Yes
32 groups; 8 ports per group
Yes
32 groups; 8 ports per group
Yes
32 groups; 8 ports per group
Yes
6 groups; 8 ports per group
LACP Yes Yes Yes Yes Yes
Trunking Across Stack Yes Yes Yes Yes No
Port mirroring Yes Yes Yes Yes Yes
Broadcast storm control Yes Yes Yes Yes Yes
VLAN
802.1Q Yes Yes Yes Yes Yes
VLAN Group
[MAX static/ dynamic] 4k/ 255 4k/ 255 4k/ 255 4k/ 255 64/ 255
GVRP support Yes Yes Yes Yes Yes
L3 Features
IGMP Yes Yes Yes Yes Yes
IPv4 Support Yes Yes Yes Yes Yes
IPv6 Support Yes (RIII) (Note1) Yes (RIII) (Note1) Yes (RII) (Note1) Yes (RII) (Note1) No
IP entries 4K 4K 4K 4K 2K
IP Static Routing Yes Yes Yes Yes Yes
RIP I/II Yes Yes Yes Yes Yes
OSPF Yes Yes Yes Yes Yes
PIM-DM Yes Yes Yes Yes Yes
PIM-SM Yes (RIII) Yes (RIII) Yes (RII) Yes (RII) No
DVMRP Yes Yes Yes Yes Yes
VRRP Yes (RII) Yes (RII) Yes Yes Yes (RII)
BGP No No No No No
Quality Of Service
Priority queues number 8 8 8 8 8
Based on Port Yes Yes Yes Yes Yes
Based on MAC DA/SA Yes Yes Yes Yes Yes
802.1p support Yes Yes Yes Yes Yes
Based on TOS Yes Yes Yes Yes Yes
DSCP Yes Yes Yes Yes Yes
Based on protocol type Yes Yes Yes Yes Yes
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Layer 3 networking example
Information
Manual
Operating System
Manual
Size Driver
120KB
File Name
layer3-routing-example.pdf
Observations
How do I setup Layer 3 routing on my DGS-3324SR/DGS-3324SRi/DXS-
3350SR, and DXS-3326GSR?
Warning:
The example configuration below was created from a factory default configuration on the DGS-3324SR/DGS-3324SRi/DXS-
3350SR/DXS-3326GSR switches. We recommend saving your current configuration if necessary.
Scenario:
This example shows a simple Layer 3 configuration on a standalone DGS-3324SR switch. The different IP networks can be routed
without any Layer 3 routing protocols enabled on the switch. In this scenario, the DGS-3324SR will create 4 local routes in the
Routing Table. The traffic going between the different subnets will be routed based on the information found in the Local Routing
table in the switch. This configuration example is based on firmware version 4.10b15.
Switch Configuration:
Step 1 Connect to the switch using the console connection with your preferred Terminal emulation software.
Step 2 Once connected to the CLI, login at the username and password prompt. The default is username is
is
Step 3 At the prompt, enter the following command:
reset system
Enter ‘y’ when prompted to confirm the factory reset. The switch will now reboot with the factory default settings.
Step 4 Login again to the switch.
Step 5 Once at the CLI, type in the following commands to create the VLANs and IP interfaces associated with each VLAN.
config vlan default delete 1:1-1:24
create vlan v101 tag 101
config vlan v101 add untagged 1:1-1:6
create ipif net1 192.168.1.254/24 v101 state enabled
create vlan v102 tag 102
config vlan v102 add untagged 1:7-1:12
create ipif net2 192.168.2.254/24 v102 state enabled
create vlan v103 tag 103
config vlan v103 add untagged 1:13-1:18
create ipif net3 192.168.3.254/24 v103 state enabled
create vlan v104 tag 104
config vlan v104 add untagged 1:19-1:24
create ipif net4 192.168.4.254/24 v104 state enabled
save
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Layer 3 networking with RIP example
Information
Manual
Operating System
Manual
Size Driver
122KB
File Name
layer3-rip.pdf
Observations
How do I setup a Layer 3 network with RIP with my DGS-3324SR/DGS-
3324SRi/DXS-3350SR, and DXS-3326GSR?
Warning:
The example configuration below was created from a factory default configuration on the DGS-3324SR/DGS-3324SRi/DXS-
3350SR/DXS-3326GSR switches. We recommend saving your current configuration if necessary.
Scenario:
This example shows a Layer 3 configuration on two DGS-3324SR switches. The routing between different subnets on each switch
will be based on the routing information exchanged between the switches using RIP. Once RIP is configured on both switches, the
DGS-3324SR_1 switch will be able to learn the Net4 and Net5 networks found on the DGS-3324SR_2 switch. In the same way, the
DGS-3324SR_2 switch will be able to learn the Net2 and Net3 networks found on the DGS-3324SR_1 switch.
Using static routes is only suitable for small networks where there are only a few subnets. If there are many subnets in the
Network, using static routes will require a lot of configuration on the switches. By using RIP, the Layer 3 switches will exchange
routing information allowing them to learn each other’s routing table automatically.
Switch CLI Configuration:
Step 1 Connect to the DGS-3324SR_1 switch using the console connection with your preferred Terminal emulation software.
Step 2 Once connected to the CLI, login at the username and password prompt (The default is username is
password is
Step 3 At the prompt, enter the following command:
reset system
Enter ‘y’ when prompted to confirm the factory reset. The switch will now reboot with the factory default settings.
Step 4 Login to the switch again.
Step 5 In the DGS-3324SR_1 switch CLI, enter the following commands to create the switch VLANs and related IP interfaces for
Net1, Net2 and Net3 on the DGS-3324SR_1 switch.
config vlan default delete 1:1-1:24
create vlan v101 tag 101
config vlan v101 add untagged 1:1-1:8
create ipif net1 192.168.1.253/24 v101 state enabled
create vlan v102 tag 102
config vlan v102 add untagged 1:9-1:16
create ipif net2 192.168.2.254/24 v102 state enabled
create vlan v103 tag 103
config vlan v103 add untagged 1:17-1:24
create ipif net3 192.168.3.254/24 v103 state enabled
save
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch Layer 3 networking with Static routing example
Information
Manual
Operating System
Manual
Size Driver
125KB
File Name
layer3-static-routes.pdf
Observations
How do I setup a Layer 3 network with Static Routes on my DGS-3324SR/
DGS-3324SRi/DXS-3350SR/DXS-3326GSR?
Warning:
The example configuration below was created from a factory default configuration on the DGS-3324SR/DGS-3324SRi/DXS-
3350SR/DXS-3326GSR switches. We recommend saving your current configuration if necessary.
Scenario:
This configuration example shows a Layer 3 configuration on two DGS-3324SR switches. It can also apply to the DGS-3324SRi,
DXS-3350SR, and DXS-3326GSR switches as well. Each switch has different subnets. Now, in order to allow the subnets on the
switches to communicate with each other, Static Routes need to be configured in both devices so that:
1) Networks at DGS-3324SR_1 (ie, Net2, Net3) can ping Networks at DGS-3324SR_2 (Net4, Net5)
2) Networks at DGS-3324SR_2 (ie, Net4, Net5) can ping Networks at DGS-3324SR_1 (Net2, Net3)
The principle is that the packets with the destination to the “remote network” will be based on the static route entries in the switch
to route the packet to the “remote Switch”, and then to the “remote network.” This configuration example is based on firmware
version 4.10b15.
Switch CLI Configuration:
Step 1 Connect to the DGS-3324SR_1 switch using the console connection with your preferred Terminal emulation software.
Step 2 Once connected to the CLI, login at the username and password prompt (The default is username is
is
Step 3 At the prompt, enter the following command:
reset system
Enter ‘y’ when prompted to confirm the factory reset. The switch will now reboot with the factory default settings.
Step 4 Login to the switch again.
Step 5 In the DGS-3324SR_1 switch CLI, enter the following commands to create the switch VLANs and related IP interfaces for
Net1, Net2 and Net3 on the DGS-3324SR_1 switch.
config vlan default delete 1:1-1:24
create vlan v101 tag 101
config vlan v101 add untagged 1:1-1:8
create ipif net1 192.168.1.253/24 v101 state enabled
create vlan v102 tag 102
config vlan v102 add untagged 1:9-1:16
create ipif net2 192.168.2.254/24 v102 state enabled
create vlan v103 tag 103
config vlan v103 add untagged 1:17-1:24
create ipif net3 192.168.3.254/24 v103 state enabled
save
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch MIB Files
Operating System
Software
Version
4.30
Size Driver
1.1MB
File Name
pxmib_4-30-b08.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DGS-3324SRi
Description
xStack Managed Layer 3 Gigabit Master Stacking Switch D-View 51/HP Openview module
Operating System
Software
Version
4.30
Size Driver
8.3MB
File Name
dgs-3324sri_dview51_v4-30r12-f4-30b11.exe
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.