Available 6 files for D-Link DI-308
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-308
Description
Firmware
Operating System
Firmware
Version
100b7
Size Driver
357KB
File Name
di-308_fw_run010b7.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-308
Description
Internet Setup Configuration Guide
Information
Manual
Operating System
Manual
Size Driver
1.3MB
File Name
di-308_internet_setup.pdf
Observations
Typical Internet Configuration for DI-206 / DI-308 Routers
(For Single user Internet Account, with static or dynamic IP address.)
1. Introduction
This document explains how to connect to the Internet using a single user account from an
Internet Service Provider. The IP network is a private network and is chosen by the installer.
In the example below the private IP network is 195.10.10.xxx. The service provider may
either provide you with a static IP address or more often a dynamic IP address, that is to say
the IP address is assigned to the router at connection time. A local network IP address still
needs to be assigned to the router.
It is assumed the network is already configured and working in terms of network adapters
and drivers installed and configured.
2. Information required from the ISP.
A certain amount of information is required from your ISP. See list below.
?? IP address (only for static IP address connections)
?? Username
?? Password
?? ISDN Telephone number to dial
?? DNS (consists of primary domain name controller IP, and name)
3. Router Configuration
It is best if you were first to do a factory reset on the router to ensure uniform settings. To
do a factory reset, attach to the router using the supplied serial cable. From the Main Menu
select ‘System Maintenance’ then ‘Factory Reset’
The simplest way to configure the router for the Internet is to install then follow the Internet
connection Wizard. To run the wizard, you must first install the RouteMan software. This
software is provided on a floppy. Install RouteMan on to your PC first then first task then is
to assign the router its IP address, in this example its 195.10.10.1.
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-308
Description
NetBIOS Filter Configuration Guide
Information
Manual
Operating System
Manual
Size Driver
285KB
File Name
di-308_netbiosfilter.pdf
Observations
Setting Up NetBIOS Filter for DI-206 / DI-308 Router
Introduction
In a local area network you may have protocols configured which may adversely effect the performance of a router such
as the DI-206. These protocols are non routable, when they arrive at the router, they may cause the router to a dial a
remote network or the internet, if its configured, unnecessarily increasing line usage resulting in wasteful phone calls. By
adding a series of simple filters, the router will ignore the non routable protocols such as NetBIOS/NetBEUI, and only
dial when a remote connection is required.
Filters Required
Ports
137 TCP & UDP NetBIOS Name Service
138 TCP & UDP NetBIOS Datagram Service
139 TCP & UDP NetBIOS Session Service
The above ports should be filtered out. See the filter setting below to add filters in the router to stop the router
dialling out.
- Main Menu – Advanced Functions – Filter Configuration – IP Filter -
The name is just an appropriate name for
this filter. The protocol type is 6
indicating a TCP packet. Set the other
settings as shown and save the
configuration.
Repeat this for the other ports 138 and
139.
The name is just an appropriate name for
this filter. The protocol type is now 17
indicating a UDP User datagram. Set the
other settings as shown and save the
configuration.
Repeat this for the other ports 138 and
139.
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-308
Description
Users Guide
Information
Manual
Operating System
Manual
Size Driver
851KB
File Name
di-308_manual.pdf
Observations
INTRODUCTION..............................................................................................1
Product Features .........................................................................................................................1
Applications for your DI-308 ......................................................................................................3
Internet Access.........................................................................................................................................3
Network Address Translation (NAT) ........................................................................................................3
LAN-to-LAN Enterprise Connections ......................................................................................................3
Telecommuting Server ..............................................................................................................................3
What This Manual Covers ...........................................................................................................3
What This Manual Doesn’t Cover ...............................................................................................4
Other Resources ..........................................................................................................................5
Packing List ................................................................................................................................5
Additional Installation Requirements ..........................................................................................5
INSTALLATION...............................................................................................6
Ordering Your ISDN Line ........................................................................................................................6
The DI-308 Front Panel ..............................................................................................................6
The DI-308 Rear Panel................................................................................................................7
Telephone Features .....................................................................................................................8
Installation and Initial Configuration .........................................................................................8
A Warning on Connection Cables.............................................................................................................9
Step 1 - Setting up the Console.................................................................................................................9
Step 2 - Connecting the Console to the Router .........................................................................................9
Step 3 - Connecting an ISDN Line to the Router....................................................................................10
Step 4 - Connecting a Telephone or Fax Machine to the Router ............................................................10
Step 5 - Connecting Ethernet Cables to the Router.................................................................................10
Step 6 - Powering Up Devices for Initial Configuration .........................................................................12
Step 7 - Initial Configuration of the Router ............................................................................................12
Step 8 - Configuring the LAN Port .........................................................................................................14
Step 9 – Plugging in All Devices ............................................................................................................15
CONFIGURATION AND MANAGEMENT.............................................................16
Console Program Main Menu ...................................................................................................16
System Information ....................................................................................................................17
Interface Configuration .............................................................................................................18
LAN.......................................................................................................................................................19
ISDN......................................................................................................................................................20
Network Configuration ..............................................................................................................21
IP Configuration ....................................................................................................................................22
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-308
Description
Firmware Update Guide
Information
Manual
Operating System
Manual
Size Driver
455KB
File Name
di-308_firmware_update.pdf
Observations
Document: How To Upgrade Firmware on a DI-206 / DI-308 Router
1. Introduction
The purpose of this document is to explain how to perform a firmware upgrade to a DI-206 router. In the DI-
206 router, the method of firmware update is Trivial File Transfer Protocol or TFTP. To carry out a firmware
update, your required to have a TFTP server in your network. As this is a requirement for firmware update of
the DI-206 Router D-Link have provided you with a TFTP server built in to the RouteMan configuration
software, and hence you need to have RouteMan installed on a PC before firmware update can be done. Also,
as TFTP uses TCPIP as the transport protocol this also need to be installed and correctly working. Before
proceeding.
2. RouteMan Configuration
When you execute routeman, you will see the following screen. Select the Preference box, and tick the TFTP
server then click ok. Now leave RouteMan running and connect to the DI-206 Router by either the console
port or by using your browser.
3. PC Setup for Firmware Update.
Copy the firmware file into a new or existing folder on your C: driver. For exampl e
C:\DI206\206r182.hdr. It would be beneficial to have RouteMan and the new firmware on the same PC .
4. Router Settings for Firmware Upgrade
If you use your web browser, you will see a screen similar to the one shown below. Select Maintenance, then
‘Software Update’
Select the ‘Save’ button to save the settings. Once the above is done, power down the routearn d power it back
on. You can see if the firmware update has started by going to the Routeman screen. Please note, it can take
up to 2 minutes to start the update.
After the firmware has been updated, restart router to check its firmware version. To dtoh is, select ‘System
Information’. Screen shown below.
5. Router Setting through Console Screen.
- Main Menu – System Maintenance – Software Update -
Setup as above saving the settings. Now Reboot the router, either by powering down router or selecting
- Main Menu – System Maintenance – System Restart.
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-308
Description
Routeman Configuration Utility
Operating System
Software
Version
1.00
Size Driver
1.5MB
File Name
di-308_routeman_1-00-02.zip
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.