Available 5 files for D-Link DWL-1000AP
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-1000AP
Description
Firmware
Operating System
Firmware
Version
3231
Size Driver
3.3MB
File Name
dwl1000ap_fwv3_2_31.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-1000AP
Description
Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
16.3MB
File Name
dwl1000ap_install_guide.pdf
Observations
Connecting the DWL-1000AP
Just plug your DWL-1000AP into the hub, switch or residential gateway
within your network, and you are up and running!
When you are networking your DWL-1000AP with other D-Link Air products,
NO CONFIGURATION IS NEEDED! Your DWL-1000AP has default settings
that will work with other D-Link Air products, right out of the box.
If there is a need, you may configure your system using the D-Link AP
Manager. You can manage your DWL-1000AP from a wired or a wireless
connection. Note: When using WEP encryption, it is strongly recommended
that you run the AP Manager on a wired connection.
Note: If you need to reset the DWL-1000AP, please refer to Appendix C.
If you wish to run the AP Manager, please complete the following steps.
Installing the AP Manager
Insert the CD for the DWL-1000AP
Manager, this screen will appear.
This screen will appear briefly.
To install the DWL 1000AP Manager into
this location,
(Otherwise, click on “Browse” to select an
alternate destination.)
(Otherwise choose a file from the
“Existing Folders” list.)
Windows will begin copying files.
To accept the settings,
(If you wish to change the settings,
press the “Back” button.)
This window will appear briefly.
Windows is copying the files.
At this screen, select “Yes, launch the
program file.”
Click “Finish” to complete the setup
of your DWL-1000AP Manager.
Running the AP Manager
At the “Welcome” screen,
Click Next to begin using the
DWL-1000AP Manager.
Go to START>PROGRAM>
D-LINK WIRELESS LAN>
D-LINK AP MANAGER
When this screen is displayed, select the
icon to start the Installation Wizard, as
shown.
The Network Wizard will find the network
settings.
(Select “Change” to choose alternate settings.)
The next screen will display the
available access point.
(If the Access Point is not discovered,
please refer to Appendix A to manually
assign an IP address.)
At the following screen,
For help in saving your configuration,
please see Appendix B.
The following screen will appear briefly.
The AP Manager has completed configuring
your system.
Your AP Manager is now ready to use.
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-1000AP
Description
Kickstart Application Guide
Operating System
Manual
Size Driver
407KB
File Name
kickstart_qig.doc
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-1000AP
Description
Wireless AP Manager
Operating System
Software
Version
1.09
Size Driver
1.6MB
File Name
d-link-ap-0109.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-1000AP
Description
Kickstart Application
Operating System
Windows 98Se-Me-2000-XP
Version
1.1
Size Driver
1.6MB
File Name
dwl1000ap_kickstart_11.zip
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.