Available 9 files for D-Link DWL-2100AP

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Firmware

Operating System

Firmware

Version

2.30

Size Driver

1.5MB

File Name

dwl2100ap-firmware-v230eu-rc038.zip

Observations

DWL-2100AP Problems Resolved: 1 [Roaming] Update current AP1s association table when STA roam to another AP2 2 Fix when DWL-2100 eu (v2.30) Firmware Release Note
Firmware: v2.30rc038
Hardware: A4
Date: Sep 11, 2006

Problems Resolved:
1. [Roaming]Update current AP1's association table, when STA roam to another AP2.
2. Fix when you use WDS and hide the SSID, then the bridge breaks.
Enhancements:
None

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Firmware

Operating System

Firmware

Version

2.40eu

Size Driver

1.6MB

File Name

dwl-2100ap_firmware_v2-40eu.zip

Observations

DWL-2100 eu Firmware v2.40 Release Note
Problems Resolved:
1. [DVIEW] When MSSID+WDS enabled, the authentication settings of MSSID should be changed followed by Primary’s setting.
2. [FW] Fix the output power issue.
3. [Firmware]SSH still could login in with old username/password, when web login username and password modified.
4. [Firmware]SSH socket still receive packet and then run out of memory even ssh is disabled.
5. [WEB] UpdateFirmware page will show wrong in 1280*1024 display mode.
6. Remove open/share key authentication for Universe Repeater.
7. [APM]can not get trap srvip .
8. [APM]Web can not get multi setting if set WDS+MULTI use APM.
9. The IOT issue, If enable the superG and WMM, some wireless card can not communicate with the AP when the Authentication is WPA and Cipher type is TKIP.
10. Change the Universe Repeater Mac address rule, If root AP's BSSID is ii:jj:kk:ll:mm:nn, Universal repeater's MAC is uu:vv:ww:tt:oo:pp. Modify Universal repeater's BSSID as 00:pp:kk:ll:mm:nn.
11. [WEB] When the login password is not blank, and user changes other settings in the same page, it will pop up a password error message in Tools\Admin page.
12. Do not support Several traps info for APM.
13. RSTP do not take effect for WDS mode
14. There is some issue for WDS+MSSID , as authentication:wpa/wpa2-psk,cipher:auto.
15. Two stations connected to secondary ssid through MSSID+wds could not ping each other.
16. Multipacket rate control could not work normal.
17. the multicast packet control issue,when multicast packets is too many, stations could not ping to the AP
18. Multi-SSID stable problem: when enable Multi-SSID, AP will stop working after several days;
19. [WEB]When user login with wrong user/password, they still can access some web pages;
20. Close the function auto save the configuration to the flash.
21. Delete some useless log messages of deauthentications.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Firmware

Operating System

Firmware

Version

2.50eu

Size Driver

1.6MB

File Name

dwl-2100_fw_2.50eu.zip

Observations

DWL-2100AP Firmware Release Notes

Firmware: v2.50
Hardware: A4
Date: 08/10/28

Problems Resolved:
1. [FW] AP can't send standard traps.
2. [FW] rogue ap list should not be shown if band is not selected.
3. [APM] rogue ap list shows wrong.
4. [WEB] It can't reset data rate settings
5. [FW] The trap status and server ip can not be set.
6. [FW] When AP mode is wds with ap, there is a lack of some logs on Syslog.
7. [FW] use the wizard to configure the AP ,and set the password empty, then restart AP. the username will be changed from admin to empty
8. [FW] Something wrong with the help document
9. [FW] There is no image but update success by tftp.
10. [FW] Intel WiFi Link 4965AGN can’t connect to AP if authentication is WPA/WPA2 PSK, and vlan state is enabled.

Enhancements:
1. [FW] Modify GUI "11g only disable/enable" to "Wireless B/G Mode Mixed/11b only/11g only" default value will be "Mixed", support CLI command.
2. [FW] Support primary SSID with VLAN tag function.
3. [FW] Support administration VLAN(Manage VLAN) , administrate AP with WLAN and management IP range function.
4. [FW] Support WMM over WDS function.
5. [FW] Support IGMP Snooping (v1/v2) function.
6. [FW] Data Rate Control follows Dlink new spec.
7. [FW] Support IAPP (fast roaming)
8. [FW] Support Secondary RADIUS server setting
9. [FW] Enable/Disable ping to AP
10. [FW] Support Acct-Interim-Interval attribute for Accounting function,
11. [FW] Trap server, settings(categorize the types of traps)
12. AP status on UI
a) CPU and Memory utilization
b) Statistics for Ethernet TX and RX,bytes and packets
13. [CLI] CLI command to input SNMP Location.
14. [CLI] Hide the commands, get targetPower/gett controlPower/get swPower ,in CLI
15. [CLI]Open 3 RSTP commands, rstp getstp/rstp getstate/rstp setstate

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Datasheet

Information

Manual

Operating System

Manual

Size Driver

331KB

File Name

dwl-2100ap.pdf

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Diagram

Information

Manual

Operating System

Manual

Size Driver

1MB

File Name

dwl-2100ap.pdf

Observations

The AirPlusXtremeG DWL-2100AP is an enhanced high-performance 802.11g wireless Access Point for use indoors. This
device supports wireless networking speeds of up to 108Mbps (Turbo mode), while providing seamless interoperability with
existing 802.11b wireless equipment. With high data transfer rates, better security and built-in bridge function, this device is
the ideal wireless solution that offers an upgrade to a fast, new technology while protecting your past investments through
interoperability with your current network equipment.
Up to 108Mbps Speed on 2.4GHz Frequency Band
Compatible With 802.11b
Flexible Configuration
Easy Migration to Higher Bandwidth
With transmission speeds of up to 108Mbps (Turbo mode) on
the popular 2.4GHz public frequency, the DWL-2100 is an
ideal solution for bandwidth intensive WLAN applications. In
a typical working environment with multiple users accessing
the network at the same time, the DWL-2100AP can operate at
15 times the throughput of the normal 802.11b wireless LAN
equipment.
802.11g's compatibility with existing wireless LAN standards
means that you do not need to change your entire network to
maintain connectivity. The DWL-2100AP can transmit data at
up to 108Mbps when used with D-Link AirPlusXtremeG and
other 802.11g products. You may sacrifice some of this speed
when you mix 802.11b with this device, but you will not lose
the ability to communicate.
The DWL-2100AP can be configured to operate in any one of
the 5 modes: (1) as a wireless access point, (2) a point-to-point
bridge with another access point, (3) a point-to-multi-point
wireless bridge, (4) a wireless client or (5) a wireless repeater.
With these built-in functions, the DWL-2100AP gives you the
flexibility to configure the device to meet your environment's
requirements.
By maintaining compatibility with your existing wireless
network equipment, the DWL-2100AP lets you upgrade to a
higher speed at the pace you want. The DWL-2100AP and
other 802.11g standard devices can be gradually added to your
network, while the rest of your older network remains
perfectly connected.
Wi-Fi TM Protected Access
802.1x Authentication
Pre-Shared Key
Embedded DHCP Server
Enhanced security is provided with Wi-FiTM Protected Access
to authorize and identify users based on a secret key that
changes automatically at a regular interval. Used in
conjunction with a RADIUS server, WPA employs TKIP
(Temporal Key Integrity Protocol) to change the temporal key
every 10,000 packets. This insures much greater security than
the standard WEP security, which requires the keys to be
changed manually.
The DWL-2100AP supports 802.1x authentication for
protection against network intrusion. Used in conjunction with
a RADIUS server, this function provides a means to verify the
identity of the client before an access to the network is granted.
This function brings a lot of convenience (when used in
conjunction with other 802.11g products) for users that do not
incorporate a RADIUS server in their networks. Utilizing the
Pre Shared Key mode of WPA, the DWL-2100AP gives each
user a new security key every time he connects to the 802.11g
network. Users only need to input their encryption information
once in the configuration menu. With the DWL-2100AP, each
user will automatically receive a new key every time he
connects, the inconvenience of manual WEP key input is
eliminated.
The DWL-2100AP includes an embedded DHCP server that
once enabled will automatically assign IP addresses to wireless
clients. This unique feature makes the DWL-2100AP an ideal
solution for quickly creating and extending a wireless local
area network (WLAN) in offices or other workplaces, and at

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Manual v2.50

Information

Manual

Operating System

Manual

Size Driver

4.5MB

File Name

dwl-2100ap_manual_2.5.pdf

Observations

Package Contents ................................................................................3
Introduction...........................................................................................4
Connections..........................................................................................5
Features and Benefits ..........................................................................7
Wireless Basics ....................................................................................8
Getting Started ....................................................................................11
Using the Configuration Menu............................................................13
Using the AP Manager........................................................................47
Networking Basics..............................................................................67
Troubleshooting..................................................................................82
Technical Specifications .....................................................................89

Contents of Package:
D-Link AirPlus Xtreme G DWL-2100AP 802.11g Wireless 108Mbps Access Point Power Adapter-DC 5V, 2.0A Manual and Warranty on CD Quick Installation Guide Ethernet Cable
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the DWL-2100AP will cause damage and void the warranty for this product.

System Requirements for Configuration:
Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter
Internet Explorer Version 6.0 or Netscape Navigator Version 6.0 and Above

Introduction
At up to fifteen times the maximum wireless signal rate of previous wireless devices (up to 108Mbps* in Super G mode), you can work faster and more efficiently, increasing productivity. With the DWL-2100AP, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly.
The DWL-2100AP is capable of operating in one of 5 different modes to meet your wireless networking needs. The DWL-2100AP can operate as an access point, access point-to-multi-point bridging mode with AP function, access point-to-multi-point bridging mode without ap function, repeater, or wireless client mode.
The DWL-2100AP is an ideal solution for quickly creating and extending a wireless local area network (WLAN) in offices or other workplaces, trade shows and special events.
Unlike most access points, the DWL-2100AP provides data transfers at up to 108 Mbps in Super G mode when used with other D-Link AirPlus Xtreme G products. The 802.11g standard is backwards compatible with 802.11b devices.
The DWL-2100AP has the newest, strongest, most advanced security features available today. When used with other 802.11g WPA (WiFi Protected Access) compatible products in a network with a RADIUS server, the security features include:
WPA:
Wi-Fi Protected Access which authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. (By contrast, the previous WEP encryption implementation required the keys to be changed manually.)
For home users that will not incorporate a RADIUS server in their network, the security for the DWL-2100AP, used in conjunction with other WPA-compatible 802.11 products, will still be much stronger than ever before. Utilizing the Pre-Shared Key mode of WPA, the DWL-2100AP will obtain a new security key every time it connects to the 802.11 network. You only need to input your encryption information once in the configuration menu. No longer will you have to manually input a new WEP key frequently to ensure security. With the DWL-2100AP, you will automatically receive a new key every time you connect, vastly increasing the safety of your communication.
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

2.7MB

File Name

dwl-2000ap_qig_v102.pdf

Observations

Connecting the DWL-2000AP Wireless
Access Point to Your Network

A. First, connect the power adapter to the receptor at the back panel of the
DWL-2000AP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable to the Ethernet port on the back panel of the
DWL-2000AP and the other end of the cable to an Ethernet Broadband Router
(i.e., D-Link DI-604) or Switch (i.e., D-Link DSS-5+). Note: You also have the option
of connecting the DWL-2000AP directly to the computer that will be used for
configuration. The Link LED light will illuminate to indicate a proper Ethernet
connection. (Note: The Ethernet Port on the DWL-2000AP is Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover-Ethernet cable to connect to
the Ethernet port on the DWL-2000AP.)
C. The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the DWL-G520
AirPlus Xtreme G Wireless PCI Adapter will connect, out of the box , with the
DWL-2000AP, using their default wireless settings. Computers with 802.11b wireless
adapters can also connect to the DWL-2000AP.

Using the Setup Wizard
Step 1 - Set up your new
password. You have the
option to establish a password.
Step 2 - Wireless Setup
The default wireless
settings are:
SSID = default
Channel = 6
You can change these
settings to match an
existing wireless network.
Step 3 - Encryption
The DWL-2000AP is capable of
two levels of wireless encryption
64-bit and 128-bit. By default
the encryption is disabled.
You can change the encryption
settings for more secure
wireless communication.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point D-View module for firmware

Operating System

Software

Version

2.50

Size Driver

3.6MB

File Name

dwl-2100ap_dview_module_fw_v2.50.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-2100AP

Description

802.11g High-Speed Wireless Access Point AP Manager Software

Operating System

Software

Version

1.13

Size Driver

1.9MB

File Name

dwl-2100ap_ap_manager_v1-13.zip