Available 9 files for D-Link DWL-2700AP Revision Bx
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router Firmware
Operating System
Firmware
Version
3.20
Size Driver
2MB
File Name
dwl-2700ap_fw_3.20rc157_rev_bx.zip
Observations
DWL-2700 AP Firmware Release Note
Firmware: v3.20 (v3.20rc157)
Hardware: Rev. B1, B2
Date: Aug 18, 2008
Problem Resolved:
1. User will fail to login to the management web UI via IE 7.0 if silverlight was installed.
2. MSSID will be modified if primary SSID security is set to 802.1x.
3. When change primary SSID settings, sometimes MSSID will also be changed.
Enhancements:
1. Add Administration VLAN feature.
2. Add Primary SSID with VLAN tag.
3. Add Secondary (backup) Radius Server for WPA (2) Enterprise settings.
4. Support Priority by SSID.
5. Support Microsoft NAP feature.
6. Support IGMP snooping v1/v2.
7. Add Rogue AP detection function.
8. Support Acct-Interim-Interval attribute for accounting function.
9. Add system and wireless sub trap group. User can also enable or disable the
trap categorization.
10. Support to administrate AP with WLAN (Default enable).
11. Support four management IP range.
12. Add CLI command to input SNMP Location.
13. Add Ping control setting.
14. Add WMM control on each MSSID.
15. Support AP Manager II v2.
16. Support MSSID over WDS.
17. Support IAPP.
18. Add wireless station linkup and link down trap.
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router Firmware
Operating System
Firmware
Version
3.10
Size Driver
1.9MB
File Name
dwl-2700ap_b1_firmware_v3-10r0112.zip
Observations
DWL-2700 AP Firmware Release Note
Firmware: v3.10r0112
Hardware: B1
Date: July 6, 2007
Code Base:
moonlight.v465-3
Tornado.v008
Problem Resolved:
1. Fixed: Can't use the MD5 authentication on pure 802.1x/static.
2. Setting changes: RTS Range is 1 to 2346 when WDS mode, 256 to 2346 when AP mode
3. Fixed the bug that username max. length is 64 and password is not null, web can't login.
4. Fixed the STA roaming problem. 2 STAs are in the same BSS and ping each other, once one of the STA roaming to another BSS. Ping will fail.
5. Fixed Telnet can’t timeout issue when receiving half of the 3-way handshake packet.
6. Fixed the WPA-PSK/WPA2-PSK function fail in AP and WDS mode.
7. Fixed WEB can't get the DNS IP when AP in DHCP client mode.
8. Fixed No System log event received anymore, after remove remote syslog server IP.
9. Fixed Multicast packet and Broadcast while disable "Ethernet to WLAN Access" function.
10. Fixed bugs -- system won’t check username and password when accessing WEB Help page directly.
11. Fixed bug -- STA can't connect to Guest-SSID with WPA-PSK as below status, a..Primary-SSID security is Open-Sys or Share-Key.
b. Guest-SSID security is WPA(2)-PSK
12. Fixed bug --Can't create WPA(2)-PSK in the WDS/WDSwithAP environment, and got error auth type when get association on console.
13. Fixed bug --Send IGMP(64 bytes, multicast packet) for 30 Min ( 5000 packet/sec )and AP hang up(memory leak). Broadcast packet (arp request) also has the same bug.
14. Fixed bug -- WDS compatibility issue(Can't connect to 8200 with WDS mode with WPA-PSK.)
15. Fixed WDS auto-reboot issue
16. Fixed few WEB security holes. Will deny un-authorized login.
17. Fixed SNTP display error when daylight saving enable
18. Fixed associated more than 83 STAs AP will reboot (Current limitation of allowed connected STAs is 64.)
19. Fixed AP auto-reboot issue with STA connecting
Enhancements:
1. SMTP/SYSLOG/SNTP support domain name.
2. Add firmware upgrade protection policy in WEB.
3. 8021X pass-thru for single SSID/MSSID
4. Support RADIUS accounting
5. Support 64 char. input for WEB login username and RADIUS account.
6. APM II supported
7. Implement the Radius accounting into Web UI
8. WMM over WDS
9. WiFi 802.11d/h certification supported
10. Pre-authentication supported
11. Add foolproof to prevent form inputting same IP into limit administrator IP 1 and 2.
12. Support 64 SMTP input characters.
13. SSID and Active time in STA information
14. Change the string “SSID” into “Wireless Network Name (SSID)”
15. Add DHCP Server
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router CLI Manual v3.20
Information
Manual
Operating System
Manual
Size Driver
187KB
File Name
dwl-2700ap_cli_manual_v3.2.pdf
Observations
Using the CLI .....................................................................................................................................................................................................................1
Command Syntax...............................................................................................................................................................................................................5
Utility Commands ..............................................................................................................................................................................................................7
Ethernet Commands ..........................................................................................................................................................................................................8
Wireless Commands...........................................................................................................................................................................................................9
Multi-SSID and VLAN Commands ....................................................................................................................................................................................14
Access Control List Commands ........................................................................................................................................................................................16
Radius Server Commands ................................................................................................................................................................................................18
DHCP Server Commands..................................................................................................................................................................................................19
Snmp Commands.............................................................................................................................................................................................................20
Time Display & SNTP Commands.....................................................................................................................................................................................22
Telnet & SSH Commands .................................................................................................................................................................................................23
System Log & SMTP Command ........................................................................................................................................................................................25
First-Time Configuration Examples ..................................................................................................................................................................................26
UTILITY COMMANDS
Help Command: Function Syntax
help Display CLI Command List help or ?
Ping Command: Function Syntax
ping Ping ping
Restart and Exit Commands: Function Syntax
set factorydefault Restore to Default Factory Settings set factorydefault
reboot Reboot Access Point. It is necessary to reboot the AP after making
configuration changes for those changes to take effect. reboot
quit Logoff quit
Version Display Command: Function Syntax
version Displays the currently loaded firmware version version
System Status Command: Function Syntax
get bdtempmode Display Monitor Board Temperature Mode get bdtempmode
set bdtempmode Set Monitor Board Temperature Mode (In Centigrade) set bdtempmode [enable:disable]
get bdalarmtemp Display Monitor Board Temperature Alarm Limitation (In Centigrade) get bdalarmtemp
set bdalarmtemp Set Monitor Board Temperature Alarm Limitation (In Centigrade) set bdalarmtemp
get bdcurrenttemp Display Current Board Temperature (In Centigrade) get bdcurrenttemp
set detectlightmode Set HW Detect Light Mode set detectlightmode [enable:disable]
Addminstration Command: Function Syntax
get login Display Login User Name get login
get uptime Display UpTime get uptime
set login Modify Login User Name set login
set password Modify Password set password
get wlanManage Display manage AP with WLAN Mode get wlanManage
set wlanmanage Set manage AP with WLAN Mode set wlanmanage [enable:disable]
get systemname Display Access Point System Name get systemname
set systemname Specify Access Point System Name set systemname
Other Command: Function Syntax
radar! Simulate radar detection on current channel radar!
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router Datasheet
Information
Manual
Operating System
Manual
Size Driver
435KB
File Name
dwl-2700ap_datasheet.pdf
Observations
The DWL-2700AP wireless G outdoor access point is an
outdoor device with dual high Gain antennas that covers
a large operating distance. This device is ideal for Internet
Service Providers to create hot spot networks to provide
outdoor users with wireless Internet access. It can also
be installed at manufacturing plants, industrial locations,
convention halls, school campuses, airports, golf courses,
marinas and other outdoor venues.
Powerful & Durable Outdoor Solution.
The DWL-2700AP is designed to handle a wide variety of
outdoor environments. It has a die-cast watertight housing,
a built-in heater and a temperature sensor. Supporting
802.3af Power over Ethernet (PoE), it can be placed at
outdoor locations where power outlets are not easily
accessible. 1 Besides functioning as an AP, this device can
be can be configured to operate as a Wireless Distribution
System (WDS) to act as a bridge linking together networks
in different buildings.
Advanced Network Security.
The DWL-2700AP supports 64/128/152-bit WEP data
encryption and WPA/WPA2 security functions. In addition,
it provides MAC Address Filtering to control user access,
and the Disable SSID Broadcast function to limit outsiders’
access to the internal network.
Network Flexibility and Efficiency.
The DWL-2700AP supports up to 8 SSID, allowing the
administrators to logically divide the access point into
several virtual access points all within a single hardware
platform. Rather than having two separate networks with
two access points, administrators can deploy one single
AP to support more than one application, such as public
Internet access and internal network control to increase
flexibility and keep costs down. The DWL-2700AP supports
802.1Q VLAN Tagging, operating with multiple SSID to
segment traffic to enhance performance and security.
The DWL-2700AP provides WLAN STA partitioning,
a function useful for deployments like at hot spots.
With station-to-station partitioning enabled, security is
enhanced, since wireless users cannot peek at each
other, and the possibility for data thievery is reduced.
Administrators can, however, disable this function, so
wireless users at an office can share hard disks and
information, and peripherals such as wireless printers.
The DWL-2700AP also supports AP grouping, allowing
several access points to balance wireless network traffic
and wireless clients among the AP with the same SSID
and different non-overlapping frequency channels.
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
5MB
File Name
dwl-2700ap_qig_102.pdf
Observations
Physical Installation for
your DWL-2700AP
Step 1: Connect the supplied
Ethernet cable with the waterproof
enclosure to the Ethernet port on
the DWL-2700AP and attach the
grounding wire.
Step 2: Install the two dipole
antennas to the antenna connector,
and attach the grounding wires.
Step 3: Install the mounting kits.
You can select between two
mounting options.
A complete DWL-2700AP with
Mounting Option A should look like
this.
A complete DWL-2700AP with
Mounting Option B should look like
this.
Connecting The DWL-2700AP Wireless
Access Point To Your Network
Step 1: Do the Physical Installation first (Please refer to pages 4-8).
Step 2: Connect the remaining end of the supplied Ethernet cable (Connected to the
DWL-2700AP in Step 1 on page 4) to the P+ DATA OUT port on the PoE base unit.
Step 3: Connect a straight through Ethernet cable from a router/switch to the DATA IN
port on the PoE base unit. If connecting directly to a PC instead of a router or switch,
then a crossover Ethernet cable must be used.
Step 4: Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical outlet.
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router Users Guide v3.20
Information
Manual
Operating System
Manual
Size Driver
5.6MB
File Name
dwl-2700ap_manual_3.20.pdf
Observations
Product Overview.........................................................................................................................5
Package Contents...................................................................................................................5
System Requirements............................................................................................................6
Introduction...........................................................................................................................7
Features.................................................................................................................................8
Wireless Basics......................................................................................................................9
Standards-based Technology.........................................................................................10
Wireless Installation Considerations.....................................................................................11
Getting Started...........................................................................................................................12
Connecting to a Power over Ethernet Network.....................................................................13
Configuration.............................................................................................................................14
Web-based Configuration Utility...........................................................................................14
Save and Activate...........................................................................................................15
Wireless Modes.............................................................................................................16
Basic Settings................................................................................................................17
Wireless Settings.......................................................................................................17
Access Point Mode....................................................................................................17
WEP Encryption....................................................................................................19
WPA/WPA2 Personal Encryption...........................................................................20
WPA/WPA2 Enterprise Encryption .......................................................................21
802.1x (RADIUS) Security....................................................................................22
WDS with AP Mode...................................................................................................23
WEP Encryption....................................................................................................25
WPA/WPA2 Personal Encryption ..........................................................................26
WDS Mode.................................................................................................................27
WEP Encryption....................................................................................................29
WPA/WPA2 Personal Encryption...........................................................................30
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router D-View module for firmware
Operating System
Software
Version
3.20
Size Driver
2.8MB
File Name
dwl-2700ap_dview_module_fw320-rc0157_rev_bx.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router AP Manager software
Operating System
Software
Version
1.00r24
Size Driver
1.7MB
File Name
dwl-2700ap_apmgr_v100-r24.exe
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2700AP Revision Bx
Description
108Mbps Wireless-G Outdoor Access Point/Router MIB file for firmware
Operating System
Software
Version
3.20
Size Driver
19KB
File Name
dwl-2700ap_mib_v3.20-rc157_rev_bx.zip
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.