Available 9 files for D-Link DWL-3200AP

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE Firmware for hardware revision B1

Operating System

Firmware

Version

2.50

Size Driver

1.5MB

File Name

dwl-3200ap_fw_v2.50.zip

Observations

DWL-3200AP Firmware Release Notes

Firmware: v2.50
Hardware: B1
Date: 08/09/19

Problems Resolved:
1. [WEB] The information in the multissid will show 11a when set the vlan tag mode to dynamic.
2. [FW] Intel WiFi Link 4965AGN can’t connect to AP if authentication is WPA/WPA2 PSK, and vlan state is enabled.
3. [FW] Fix the Microsoft SilverlightIE compatibility issue.
4. [FW] AP couldn’t connect to fast radius.
5. [FW] Can’t kick off station through APMII v2.0.
6. [WEB] User can’t configure a valid IP address(such as X.255.X.X or X.X.255.X) as a DHCP Start Address in DHCP Server page.
7. [FW] Can’t set the ip address successful when change the boot mode from normal mode to art mode.
8. [CLI] When WDS or WDS with AP mode is set, disable CLI command about rate control and support rate.
9. [FW] According to RFC-2868, let the Dynamic VLAN function more compatible with most of RADIUS Servers.
10. [FW] Change Admin IP when only the IP in the range of Admin IP can access AP (remove the default range: the same network as AP’s)
11. [FW] Fix the issue of Acct-Interim-Interval
12. [FW] The issue of Dynamic Vlan for NAP
13. [CLI] Command set lcp 1/0 could not take effect
14. [FW] When use dynamic VLAN function to assign VID to STA, STA which connect to MSSID can’t get dynamic VID from server.
15. [FW] AP will crash when multi-ssid is enable and authentication type is WPA-AUTO-PSK.
16. [FW] IP filter range list is wrong when set by APMII or D-View.
17. [FW] b/c flood trap should be wireless type.
18. [FW] when use APMII or D-View upload configure, it take effect immediately, and could not restart AP from APMII/ D-View
19. [WEB] When change multi-ssid 's security to other security from WPA/WPA2/WPA-AUTO-EAP, the VLAN Tag mode should be changed to manual and VLAN id could be input immediately ,
20. [WEB] if multi-ssid' ssid is the same as other ssid, it should pop up a warning message

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE Firmware

Operating System

Firmware

Version

2.40

Size Driver

1.4MB

File Name

dwl-3200ap_firmware_v2-40rc167.zip

Observations

DWL-3200 AP Firmware Release Note
Firmware: v2.40rc167
Hardware: B1
Date: June. 22, 2007

Problems Resolved:
1. Updating firmware from APMII will failed caused by memory size.
2. [WEB] Close two back door accounts. (Two user name and password - demo/demo and user/password, can login WEB page.)
3. [WEB&APMII] Fix the issue that System Time on home page is one hour later than Local Time on SNTP page when Daylight Saving Time is enabled.
4. [FW] Second radius settings have not sent to APM/APMII/DV in config file.
5. [FW] Can’t save data rate control setting with APM/APMII/DV
6. [FW]IAPP roaming can’t send MOVE-NOTIFY packets.
7. [FW]AP can’t send coldstart trap, when user push the reset button.
8. [FW]AP hadn’t sent trap message,when CPU loading full.
9. [FW]AP crashed,when authentication type is WPA.
10. [WEB]User set SNMP server’s IP failed.
11. [FW]MSSID cann’t response the probe request,when STA scaning.
12. [FW]Multi-SSID stable problem: when enable Multi-SSID with WPA-PSK, AP will stop services after several days
13. [WEB]When user login with wrong user/password, they still can access some web pages
14. [WEB]The WMM's status of Primary SSID cann't display rightly in Multi-SSID webpage
15. [WEB]SNTP time server error

Enhancements:
1. Support APM-II
2. Support WMM to 802.1p mapping, VLAN tagged packet forwarding(disabled).
3. Multicast packet control, from LAN to WLAN
4. On WEB UI, add Data Rate Control (refer to WiFi manager).
5. Support 802.11MIB
6. Support MIB-II (RFC-1213)
7. AP status on UI (also on MIB)
a) CPU and Memory utilization
b) Statistics for Ethernet TX and RX,bytes and packets
8. Secondary RADIUS server setting
9. Trap server, settings(catagorize the types of traps)
10. Enable/Diabe ping
11. Rouge AP protection
12. support IAPP(802.11f) roaming

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE Firmware

Operating System

Firmware

Version

2.20r0476

Size Driver

1.5MB

File Name

dwl-3200ap_fw_v2-20r0476.zip

Observations

DWL-3200AP Problems Resolved: 1 WDS cant connect when user disabled SSID Broadcast 2 Change Radius Secret size from 32 to Firmware: v2.20-r0476
Hardware:
Date: March 20, 2006

Problems Resolved:
1. WDS can't connect when user disabled SSID Broadcast.
2. Change Radius Secret size from 32 to 64.
3. Revise the Community Public/Private "Stream" to "String".
4. Grouping Help links wrong to DCHP.
5. If SSID set "\" , web page will error.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

853KB

File Name

dwl-3200ap_qig_101.pdf

Observations

System Requirements:
Minimum System Requirements:
• CD-ROM Drive
• Computers with Windows, Macintosh, or Linux-based operating systems
• Installed Ethernet Adapter Internet Explorer version 6.0 or Netscape
Navigator version 7.0 and above

DWL-3200AP Install Guide
Step 1 - Setup your new
password. You have the
option to establish a password.
Step 2 - Set Wireless LAN
Connection.
By default the
DWL-3200AP SSID is set
to default with a Channel
setting of 6.
Step 3 - Encryption
The DWL-3200AP is capable of
three levels of wireless encryption:
64-, 128-, 152-bit, using either
Hexadecimal or ASCII key type.
By default encryption is disabled.
You can change the encryption
settings for more secure wireless
communication.

Installing the Hardware

Connect one end of an Ethernet cable
(included with your package) to the
LAN port on the DWL-3200AP and the
other end of the Ethernet cable to the
port labeled P+DATA OUT on the PoE
base unit.
Connect another Ethernet cable from
the DATA IN port on the PoE base unit
to your router/switch or to a PC.
Attach the power adapter to the connector
labeled POWER IN on the PoE base unit.
Attach the power cord to the power adapter
and into an electrical outlet.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE Users Guide v2.50

Information

Manual

Operating System

Manual

Size Driver

10.8MB

File Name

dwl-3200ap_manual_2.60.pdf

Observations

Table of Contents...................................................................2
Package Contents.................................................................3
Introduction............................................................................4
Features and Benefits...........................................................6
Wireless Basics.....................................................................7
Three Operational Modes....................................................10
Getting Started....................................................................11
Using the Configuration Menu.............................................13
AP Manager II......................................................................58
Networking Basics...............................................................59
Troubleshooting...................................................................75
Technical Specifications......................................................81
Contacting Technical Support..............................................84
Warranty .............................................................................85
Registration ........................................................................87
? D-Link AirPremierTM DWL-3200AP
Managed Wireless Access Point
? Power over Ethernet base unit
? Power Adapter-DC 48V, 0.4A
? Power Cord
? Manual and Warranty on CD
? Install Guide
? Ethernet Cable
Package Contents
Minimum System Requirements
Note: Using a power supply with a different voltage than the one included with the DWL-3200AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
? Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter
? Internet Explorer version 7.0 or Mozilla Firefox version 3.0 and above

Introduction
At up to fifteen times the speed of previous wireless devices (maximum wireless signal rate of up to 108Mbps* in Super G mode), you can work faster and more efficiently, increasing productivity. With the DWL-3200AP, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly.
The DWL-3200AP is capable of operating in one of 3 different wireless networking modes; access point, WDS (Wireless Distribution System) with AP, or WDS mode.
Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DWL-3200AP shares power and data over the CAT5 cable, making the setup of your network less expensive and more convenient.
An ideal solution for quickly creating and extending a wireless local area network (WLAN) in offices or other workplaces, trade shows and special events, the DWL-3200AP provides data transfers at up to 108Mbps in Super G mode when used with other D-Link AirPremier products. (The 802.11g standard is backwards compatible with 802.11b devices.)

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE Datasheet

Information

Manual

Operating System

Manual

Size Driver

918KB

File Name

dwl-3200ap_datasheet.pdf

Observations

The D-Link AirPremier DWL-3200AP is a powerful and reliable wireless access point for
business-class enterprise environments. Designed for indoor installation, this access point
provides secure options for network administrators to deploy a highly manageable and extremely
robust wireless network. This access point supports Power over Ethernet (PoE) and provides two
high-gain antennas for optimal wireless coverage.
PoE Support. Enclosed in a plenum metal chassis, the DWL-3200AP adheres to strict fire codes
and ensures complete safety. For advanced installations, this high-speed access point has an
integrated 802.3af Power over Ethernet (PoE) support to allow installation in areas where power
outlets are not readily available.
Up to 108Mbps Wireless Speed. The DWL-3200AP delivers extremely reliable wireless
performance with standard 802.11g wireless throughput rates of up to 54Mbps. It has the added
capability of reaching maximum wireless signal rates of up to 108Mbps (Turbo mode) powered by
D-Link 108G technology. At the same time, the DWL-3200AP remains fully compatible with the
IEEE 802.11b and 802.11g standards.
Advanced Wireless Security. Since wireless security remains a strong concern among businesses,
the DWL-3200AP provides the latest wireless security technologies by supporting both WPAEnterprise
and 802.1x to ensure complete network protection. In addition, the DWL-3200AP
currently comes 802.11i-ready to fully support industrial grade wireless security.
Advanced Network Management. Network administrators can manage all the DWL-3200AP's
settings via its web-based configuration utility or with Telnet. For advanced network management,
the administrators can use D-Link's AP Manager or D-View SNMP management module to
configure and manage multiple access points from a single location. In addition to a streamlined
management process, network administrators can also verify and conduct regular maintenance
checks without wasting resources by sending personnel out to physically verify proper operation.
WDS (Wireless Distribution System) Support. To maximize total return on investment, the DWL-
3200AP can be configured to operate as an access point (AP mode), a point-to-point bridge or a
point-to-multipoint bridge (WDS mode). In the WDS mode, the DWL-3200AP communicates only
with wireless bridges, without allowing for wireless clients or stations to access them.
Increased Network Flexibility and Efficiency. The DWL-3200AP supports multiple SSIDs, allowing
you to separate applications based on security and performance requirements. You can enable
encryption and authentication on one SSID to protect private applications and no security on
another SSID to maximize open connectivity for public usage. Multiple SSIDs means you can mix
and match the broadcasting of SSIDs. For public Internet access applications, you can broadcast
the SSID to enable user radio cards to automatically find available access points. For private
applications, you can disable SSID broadcast to prevent intruders from identifying your network.
You can set the number of users that can associate via a particular SSID to control usage of
particular applications. This can help provide a somewhat limited form of bandwidth control for
particular applications.
Cost Saving and Mobile Applications. By supporting multiple SSIDs, the DWL-3200AP allows you
to logically divide your access point into several virtual access points all within a single hardware
platform. Rather than having two separate WLANs, you can deploy one access point to support
more than one application, such as public Internet access and internal network control to increase
flexibility and keep costs down.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE D-View module for firmware

Operating System

Software

Version

2.50

Size Driver

3.7MB

File Name

dwl-3200ap_dview_module_fw2.50-rc341.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE AP Manager software

Operating System

Software

Version

2.30r07

Size Driver

2MB

File Name

apmgr_dwl3200ap_v230_r07.zip

Observations

DWL3200 AP Manager Release Note v2.30-r07
Firmware: w230 rc068
AP Manager : v2.30r07
Date:November 14, 2006
First release.
Problems Resolved
Enhancements:
1. remove “Ethernet link Status” and supported old FW.
DWL3200 AP Manager Release Note v2.30-r06
Firmware: w230 rc060
AP Manager : v2.30r06
Date:October 30, 2006
First release.
Problems Resolved
Enhancements:
2. when apmode is not normal ap, the value of grouping setting is Disable and gray.

DWL3200 AP Manager Release Note v2.30-r05
Firmware: w230 rc052
AP Manager : v2.30r05
Date:October 13, 2006
First release.
Problems Resolved
Enhancements:
1. secondary ssid default value is blank
2. fixed save primary vlan id,it pop wrong message.
3. disable vlan state,enable MSSID state, in item of "MSSID index" select MSSID which has set in list,click save.then enable vlan state.we will change the valn ID will show 0.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3200AP

Description

108Mbps Enterprise Managed Wireless AP with PoE MIB file

Operating System

Software

Version

2.50

Size Driver

37KB

File Name

dwl-3200ap_mib_v2.50.zip