Available 8 files for D-Link DWL-3260AP

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point Firmware

Operating System

Firmware

Version

1.20

Size Driver

1.5MB

File Name

dwl-3260ap_fw_v120rc340.zip

Observations

DWL-3260 AP Firmware Release Note

Firmware: v1.20 rc340
Hardware: A1,A2
Date: Dec, 11 2008

Problems Resolved:
1. The information in the multissid will show 11a when set the vlan tag mode to dynamic.
4. User will fail to login to the management web UI via IE 7.0 if silverlight was installed.
5. AP couldn’t connect to fast radius.
6. Can’t kick off station through APMII v2.0.
7. Enhance the MSSID over WDS function, allow user change the security settings of MSSID when the ap mode is WDS with AP.
8. Intel WiFi Link 4965AGN can’t connect to AP if authentication is WPA/WPA2 PSK, and vlan state is enabled.
9. It should send an IAPP-ADD-Notify packet when STA roaming to AP2 from AP1, not only an IAPP-Move-Notify packet.

Enhancements:
1. Support primary SSID with VLAN tag function.
2. Support administration VLAN (Manage VLAN), administrate AP with WLAN and management IP range function.
3. Support WMM over WDS function.
4. Support Priority by SSID function.
5. Support IGMP Snooping (v1/v2) function.
6. Support 802.1X Dynamic VLAN function.
7. Support IAPP (fast roaming)
8. Support APMII v2.0
9. Support NAP.
10. Support Acct-Interim-Interval attribute for Accounting function,
11. Add wireless station linkup and link down trap
12. CLI command to input SNMP Location.
13. Support 3 RSTP CLI commands, rstp getstp/rstp getstate/rstp setstate

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point Firmware

Operating System

Firmware

Version

1.10

Size Driver

1.5MB

File Name

dwl-3260ap_firmware_v1-10rc247.zip

Observations

DWL-3260 AP Firmware Release Note

D-Link Firmware: v1.10 rc247 for all region
Hardware: Rev A1
Date: Mar 14, 2008
Problems Resolved:
1. [FW] Fix the output power issue for EU.
2. [WEB]There should be a warning message, when primary ssid’s authentication changes to others from WPA-EAP, while at least one of MSSID’s authentications is WPA-EAP.
3. [WEB]After reboot, System time doesn't work, when SNTP set to manual mode.
4. [WEB]Change "Radio" to "Wireless" and remove this feature in wireless client mode, in Advance Wireless Settings.
5. [WEB]Change some string errors,” Link Integrate “ to "Link Integrity", “Wins” to "WINS", "SubMask" to "Submask".
6. [WEB]Change "WLAN 802.11G" to "WLAN", in Status>Stats.
7. [MIB] set adGetClient index to 1 as default, and set adGetClient index to 1 and get rid of the entry(do not allow user to change it)
8. [SNMP] remove the item of “ Ethernet link status” in grouping page.
9. [Firmware]SSH still could login in with old username/password, when web login username and password modified.
10. [WEB]There are some errors in help files.
11. When user login with wrong user/password from web, they still can access some web pages
12. SNTP time server error
13. When enable Multi-SSID with WPA-PSK with wrong passphrase, AP will stop working after several days
14. Disable auto configuration saving to Flash
15. Delete some useless messages of deauthentications.
16. The WMM's status of Primary SSID can't display rightly in Multi-SSID webpage;
17. Multicast packet control, from LAN to WLAN.
Enhancements:
1. Supports Data Rate control
2. Supports APM II
3. Support WMM to 802.1p(basic) mapping, VLAN tagged packet forwarding
4. Support 802.11MIB
5. Support MIB-II (RFC-1213)
6. AP status on UI (also on MIB,CPU and Memory utilization ,Statistics for Ethernet TX and RX)
7. Support EAP secondary RADIUS server
8. Trap server, settings(categorize the types of traps)
9. Supports MSSID over WDS

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point User Manual

Information

Manual

Operating System

Manual

Size Driver

7.6MB

File Name

dwl-3260ap_a1_manual_1.00.pdf

Observations

Table of Contents.............................................................................. 2
Package Contents............................................................................. 3
Introduction...................................................................................... 4
Features and Benefits........................................................................ 6
Wireless Basics................................................................................. 7
Three Operational Modes................................................................ 10
Getting Started................................................................................ 11
Using the Configuration Menu........................................................ 13
Using the AP Manager.................................................................... 54
Networking Basics.......................................................................... 84
Troubleshooting............................................................................ 100
Technical Specifications................................................................ 106

? D-Link AirPremierTM DWL-3260AP
Managed Wireless Access Point
? Power over Ethernet base unit
? Power Adapter-DC 48V, 0.4A
? Power Cord
? Manual and Warranty on CD
? Quick Installation Guide
? Ethernet Cable
Package Contents
Minimum System Requirements
Note: Using a power supply with a different voltage than the one included with the
DWL-3260AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
? Computers with Windows®, Macintosh®, or Linux-based operating systems with
an installed Ethernet Adapter
? Internet Explorer version 6.0 or Netscape Navigator™ version 7.0 and above

Introduction
The D-Link AirPremier DWL-3260AP is a powerful and reliable wireless access point for businessclass
enterprise environments. Designed for indoor installation, this access point provides
advanced functions including 108Mbps Turbo speed, security, Quality of Service (QoS), and
Power over Ethernet (PoE) for network administrators to deploy a highly manageable and robust
wireless network.
Up to 108Mbps Wireless Speed. The DWL-3260AP delivers reliable wireless performance with
standard 802.11g wireless throughput rates of up to 54Mbps. It has the added capability of
reaching maximum wireless signal rates of up to 108Mbps (Turbo mode) powered by D-Link
108G technology. At the same time, the DWL-3260AP remains fully compatible with the IEEE
802.11b and 802.11g standards.
Power Over Ethernet Support. For maximum coverage, the DWL-3260AP can be placed at outof-
the-way locations such as on a ceiling, using a mounting plate. Industry-standard 802.3af PoE
support facilitates installation of this device on high places, where AC outlets are inaccessible and
providing power to these locations is difficult and expensive. From the ceiling, the DWL-3260AP
can obtain power from a PoE switch located as far as 100 meters away through the unused pairs
of the existing network cable, doing away with the need to install separate power wiring.
Ceiling Mounting. The DWL-3260AP has a round shape and can be camouflaged as a smoke
detector to distract the attention of network intruders. Its diagnostic LED can be turned off to make
it appear even more like a smoke detector.
Advanced Wireless Security. Since wireless security remains a strong concern among
businesses, the DWL-3260AP provides the latest wireless security technologies by supporting
both WPA/WPA2-Enterprise and 802.1x to ensure complete network protection. In addition, the
DWL-3260AP currently comes 802.11i-ready to fully support industrial grade wireless security.
Other security features included in this Access Point are MAC Address Filtering, Wireless LAN
segmentation, Broadcast SSID Disabled, and support for Advanced Encryption Standard (AES)
data encryption.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point Datasheet

Information

Manual

Operating System

Manual

Size Driver

269KB

File Name

dwl-3260ap.pdf

Observations

The D-Link AirPremier DWL-3260AP is a powerful and reliable wireless access point for business-class enterprise environments. Designed for indoor installation, this access point provides advanced functions including 108Mbps Turbo speed, security, Quality of Service (QoS), and Power over Ethernet (PoE) for network administrators to deploy a highly manageable and robust wireless network.
Up to 108Mbps Wireless Speed. The DWL-3260AP delivers reliable wireless performance with standard 802.11g wireless throughput rates of up to 54Mbps. *It has the added capability of reaching maximum wireless signal rates of up to 108Mbps (Turbo mode) powered by D-Link 108G technology. At the same time, the DWL-3260AP remains fully compatible with the IEEE 802.11b and 802.11g standards.
Power Over Ethernet Support. For maximum coverage, the DWL-3260AP can be placed at out-of-the-way locations such as on a ceiling, using a mounting plate. Industry-standard 802.3af PoE support facilitates installation of this device on high places, where AC outlets are inaccessible and providing power to these locations is difficult and expensive. From the ceiling, the DWL-3260AP can obtain power from a PoE switch located as far as 100 meters away through the existing network cable, doing away with the need to install separate power wiring.
Ceiling Mounting. The DWL-3260AP has a round shape and can be camouflaged as a smoke detector to distract the attention of network intruders. Its diagnostic LED can be turned off to make it appear even more like a smoke detector.
Advanced Wireless Security. Since wireless security remains a strong concern among businesses, the DWL-3260AP provides the latest wireless security technologies by supporting both WPA/WPA2-Enterprise and 802.1x to ensure complete network protection. In addition, the DWL-3260AP currently comes 802.11i-ready to fully support industrial grade wireless security. Other security features included in this Access Point are MAC Address Filtering, Wireless LAN segmentation, Broadcast SSID Disabled, and support for Advanced Encryption Standard (AES) data encryption.
WDS (Wireless Distribution System) Support. To maximize total return on investment, the DWL-3260AP can be configured to operate as an access point (AP mode), a point-to-point bridge or a point-to-multipoint bridge (WDS mode). In the AP mode, the DWL-3260AP uses its built-in omni-directional antenna for multi-angle coverage. In the WDS mode, the DWL-3260AP can be mounted on a high wall and externally fitted with an optional directional antenna through its SMA connector. Users will disable the built-in antenna through a slide switch, and the DWL-3260AP will communicate only with wireless bridges, using the external directional antenna, without allowing wireless clients or workstations to access them.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point D-View module for firmware

Operating System

Software

Version

1.20

Size Driver

3.8MB

File Name

dwl-3260ap_dview_module_fv120-rc337.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point MIB file for firmware

Operating System

Software

Version

1.20

Size Driver

19KB

File Name

dwl-3260ap_mib_v120-rc340.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point AP Manager

Operating System

Software

Version

1.10

Size Driver

10.9MB

File Name

dwl-3260ap_ap_manager_v1.10r0045.zip

Observations

AP Manager II Release Note v1.10-r0045

Module Name Version Number Description
DWL-7700AP V3.10r05 No change
DWL-2700AP V310r06 No change
DWL-3200AP V2.41r03 No change
DWL-8200AP V2.04r02 No change
DAP-3220 V1.00r14 Bug fixed
DWL-3260AP V1.10r08 Bug fixed

Manager : v1.10r0045
Hardware:
Date: Oct.31, 2007
Problems Resolved:
3220 Module:
1. If Account Server IP is not default “0.0.0.0”, Multi-SSID set to EAP should allow user change Account Mode.
2. Restart AP, the system time will lose the value, so open the information should reset the time.
3260 Module:
1. If Account Server IP is not default “0.0.0.0”, Multi-SSID set to EAP should allow user change Account Mode.
2. Restart AP, the system time will lose the value, so open the information should reset the time.
3. Adjust the position of Led label.
Enhancements

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-3260AP

Description

AirPremier 802.11g Indoor Wireless Access Point AP Manager software

Operating System

Software

Version

1.00r05

Size Driver

1.9MB

File Name

dwl3260ap_apmgr_v100_r05.zip

Observations

D-Link DWL3260 AP Manager Release Notev1.00-r05
Manager : v1.00r05
Firmware: v1.00-rc074
Hardware: A1
Date: Dec 1, 2006
Problems Resolved:
None.
Enhancements:
1. Add LED control.

D-Link DWL3260 AP Manager Release Notev1.00-r04
Manager : v1.00r04
Firmware: v1.00-rc073
Hardware: A1
Date: Nov 30, 2006
Problems Resolved:
1. Fixed Password check.
Enhancements:
None.
D-Link DWL3260 AP Manager Release Notev1.00-r03
Manager : v1.00r03
Firmware: v1.00-rc072
Hardware: A1
Date: Nov 28, 2006
Problems Resolved:
1. Fixed Mainform and Aboutform name are different with pic.
Enhancements:
None.
D-Link DWL3260 AP Manager Release Notev1.00-r02
Manager : v1.00r02
Firmware: v1.00-rc071
Hardware: A1
Date: Nov 27, 2006
Problems Resolved:
1. Fixed if device name include " after apply , APM show device name blank.
2. Fixed if set Superg enable and auto channal scan disable, can change channel still.
3. Fixed the Authentication and AP mode's option is different with Web.
4. Fixed when upload ssl use APM, device will reboot automatic.
5. Fixed uninstall problem and icon.
Enhancements:
None.