Available 10 files for D-Link DWL-7100AP

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Firmware

Operating System

Firmware

Version

2.12EU

Size Driver

1.4MB

File Name

dwl-7100ap_fw_v212eu.zip

Observations

DWL-7100AP Firmware Release Notes

Firmware: v2.12eu
Hardware: A2
Date: 08/10/29

Problems Resolved:
1. [APM] AP repeater/ AP client mode, Security can’t show the detail when get site survey in 11a.
2. [WEB] AP repeater mode, channel shows wrong in 11a band.
3. [FW] Fix APM can not apply config information.
4. [FW] Fix APM scan AP may cause AP system crash when AP still scan DFS channel.
5. [SNMP] Fix SNMP show "00:00:00:00:00:00" mac address in 11A band.
6. [WEB] Grey out channel select item when ap mode is ap repeater.
7. [FW] Fix AP manage can not delete MAC in MAC ACL filter.
8. [WEB] Fix the IP, wins, gateway, DNS check rule.
9. [WEB] User name can be blank and the password at most 12 characters.
10. [WEB] The PassPhrase should not be shown as text.
11. [FW] AP client couldn’t ping to root ap.
12. [FW] AP repeater low throughput.
13. [FW] Update firmware will failure
14. [WEB] User can’t configure a valid IP address(such as X.255.X.X or X.X.255.X) as a DHCP Start Address in DHCP Server page.
15. Bug fixed: DFS can’t reboot after device detected radar signal
.
Enhancements:
1. [FW] Support WDS and WDS with AP mode in 11a for the United Kingdom (EU) domain, and restrict the channel to 36-48.
2. [SNMP] Support APM and DVIEW.
4. [FW] Support DFS for EU domain.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Firmware

Operating System

Firmware

Version

2.10

Size Driver

1.3MB

File Name

dwl-7100ap_firmware_v2-10eu.zip

Observations

Please see the download for full release notes.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Firmware

Operating System

Firmware

Version

2.00r0342

Size Driver

1.3MB

File Name

dwl-7100ap_fw_v2-00eu-r0342.zip

Observations

DWL-7100eu AP Firmware Release Note

Firmware: v2.00r0342
Hardware:
Date: May 10, 2005

First Release

Problems Resolved:
1. Modified CLI-command table, remove some commands.
2. Added a function to check country code when AP boot up.
3. Fix: Web page can upload CFG file when user key-in some path in address line.

Enhancements:
None

???? (Date) ??(Ver.) ? ? ? ?(Description)
2004/10/21 V2.00(r250) The first release.
2004/11/02 V2.00(r254) Fix: Web page’s bugs (Channel/Frequency…)
2004/11/24 V2.00(r0274) Fix DFS cannot work.
2004/12/03 V2.00(r0281) 1. Fixed WEB page’s bug (Channel)
2. Remove Auto channel Select / SSID Broadcast / WDS mode for 802.11A
3. Fixed APM can’t get correct Super A mode.
2004/12/07 V2.00(r0282) 1. Web page’s problem
a.Configuration spell error.
a. SSID can't show "blank" in the status page!
2. Modified the allocate memory size when user use WEB to download/upload configuration file.(1MB->2MB)
2004/12/09 V2.00(r0284) Remove APR/APC for 11a band
2004/12/14 V2.00(r0289) 1. Modify Web page’s string.
2. Change SSID, in PSK mode cannot connect.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Manual

Information

Manual

Operating System

Manual

Size Driver

4.7MB

File Name

dwl7100ap_manual_v100.pdf

Observations

Package Contents ................................................................................3
Introduction............................................................................................4
Wireless Basics ....................................................................................6
Installation Considerations ....................................................................8
Getting Started ......................................................................................9
Using the Configuration Menu.............................................................. 11
Networking Basics ..............................................................................27
Troubleshooting...................................................................................42
Technical Specifications ......................................................................48
Contacting Technical Support ..............................................................51
Warranty and Registration ...................................................................52
Introduction
At up to fifteen times the speed of previous wireless devices (up to 108Mbps in Super
AG mode), you can work faster and more efficiently, increasing productivity. With the
DWL-7100AP, bandwidth-intensive applications like graphics or multimedia will benefit
significantly because large files are able to move across the network quickly.
Inclusion of all three standards (802.11g; 802.11a; 802.11b) means that the DWL-7100AP
is versatile enough to allow connection to almost any 802.11 network or device.
The DWL-7100AP has the newest, strongest and most advanced security features
available today. When used with other 802.11 WPA (Wi-Fi Protected Access) compatible
products in a network with a RADIUS server, the security features include:
WPA: Wi-Fi Protected Access which authorizes and identifies users based on a secret
key that changes automatically at regular intervals. WPA uses TKIP (Temporal
Key Integrity Protocol) to change the temporal key every 10,000 packets (a
packet is a kind of message transmitted over a network.) This ensures much
greater security than the standard WEP security. (By contrast, the previous
WEP encryption implementations required the keys to be changed manually.)
For home users that will not incorporate a RADIUS server in their network, the security
for the DWL-7100AP, used in conjunction with other WPA-compatible 802.11 products,
will still be much stronger than ever before. Utilizing the Pre-Shared Key mode of
WPA, the DWL-7100AP will obtain a new security key every time it connects to the
802.11 network. You only need to input your encryption information once in the
configuration menu. No longer will you have to manually input a new WEP key frequently
to ensure security. With the DWL-7100AP, you will automatically receive a new key
every time you connect, vastly increasing the safety of your communication.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

1.9MB

File Name

dwl-7100ap_qig_100.pdf

Observations

Connecting The DWL-7100AP To Your
Network

A. First, connect the power adapter to the receptor at the back panel of
the DWL-7100AP and then plug the other end of the power adapter
to a wall outlet or power strip. The Power LED will turn ON to indicate
proper operation.
B. Insert an Ethernet cable into the LAN port on the back panel
of the DWL-7100AP and an available Ethernet port on the network
adapter in the computer you will use to configure the DWL-7100AP. The
Link LED for the LAN Port will illuminate to indicate a proper connection.
C. Computers with 802.11a/b/g wireless adapters can connect to the
DWL-7100AP. The DWL-AG650 AirXpertTM Wireless Cardbus Adapter
and the DWL-AG520 AirXpertTM Wireless PCI Adapter will connect, out of
the box, with the DWL-7100AP, using their default settings.

When you have completed
the steps in this Quick
Installation Guide, your
connected network should
look similar to this:

Using The Setup Wizard
Step 1 - Set up your
new password. You
have the option to
establish a password.
Step 2 - Wireless LAN
802.11a Setup
The default wireless
settings are:
SSID = default
Channel = 52
You can change these
settings to match an
existing wireless network.
Step 3 - WEP Encryption
for 802.11a
The DWL-7100AP is capable
of 64-, 128-, and 152-bit
encryption. Select the key
size you wish to use and
enter the key in the field
provided. By default, WEP is
Disabled.

Your Setup is Complete!

Step 2 - Wireless LAN
802.11g Setup
The default wireless
settings are:
SSID = default
Channel = 6
You can change these
settings to match an
existing wireless network.
Step 3 - WEP Encryption
for 802.11g
The DWL-7100AP is
capable of 64-, 128-, and
152-bit encryption. Select
the key size you wish to
use and enter the key in
the field provided. By
default, WEP is Disabled.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Datasheet

Information

Manual

Operating System

Manual

Size Driver

374KB

File Name

dwl-7100ap.pdf

Observations

802.11a/g Tri-Mode Dualband Wireless Access Point
The D-Link AirPremier AG DWL-7100AP is a tri-mode, dualband wireless Access Point that provides the most expanded user
bandwidth available in an AP. Hundreds of wireless clients can connect to this AP using any one of its 19 non-overlapping
channels to transfer data at speeds never before achievable in a wireless device.
Dualband Operation
Fast, Unobstructed Data Transfer
The DWL-7100AP operates seamlessly and simultaneously
in both the 2.4GHz and 5GHz frequency spectrums
supporting the 802.11b and the newer, faster 802.11a and
802.11g wireless standards. For offices, schools or public
hotspots that already use 802.11b devices, the DWL-7100AP
is a great way to expand an existing network. It enables more
users to communicate with one another, access data and the
Internet. Now, you can have an AP that will compliment your
existing network and protect the investment you made when
you provided the convenience of wireless networking.
The DWL-7100AP offers transfer rates up to 108Mbps Turbo
mode in the 2.4GHz band, large data
packets travel from the router to a remote desktop or roaming
laptop PC at up to five times the speed of previous wireless
devices. Everyone can work faster and more efficiently or
watch a streaming video smoothly. The additional (802.11a)
5GHz band also offers a way to quickly transfer data without
the interference produced by other devices operating in the
2.4GHz frequency.
Network Segmentation by Frequency Channels
Enhanced Network Security
Network administrators can partition the usage of the
dualband DWL-7100AP by segmenting the users on the
wireless network by frequency band. Users who require
special networking privileges access to sensitive information,
specific departments or video conferencing may use just the
802.11a channels; while other employees may just use the
802.11b and 802.11g channels. This type of user
segmentation optimizes the AP's performance and delivers
the best network experience to each set of users.
The DWL-7100AP is ideal for network administrators who
require additional network security features. All of the AP's
settings are easily accessible in the web-based software user
interface that features a step-by-step Setup Wizard to get
your AP up and running in just a matter of minutes. The
DWL-7100AP incorporates the 802.1x standard for wireless
user authentication and WPA (Wi-Fi Protected Access)
which dynamically encrypts data as it's being sent.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point Diagram

Information

Manual

Operating System

Manual

Size Driver

727KB

File Name

dwl-7100ap.pdf

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point D-View Software

Operating System

Software

Version

2.12

Size Driver

2MB

File Name

d-view_dwl-7100ap_2.12.zip

Observations

ALPHA DWL7100 AP D-VIEW Release Note v2.12-r08
Firmware: v212eu-rc353
Hareware:6A1G
D-View : v2.12r10
Date: September 12, 2008
Problems Resolved:
Fixed these bugs:
Bug20: the problem about button in static pool settings.
Bug21: In 802.11a&g,select "ap repeater"mode, click "site survey scan",choose one root ap,after applying, look at the web, root ap's ssid won't change,but the MAC have changed as the Dview.

Firmware: v212eu-rc348 .
Hareware:6A1G
D-View : v2.12r09
Date: September 2, 2008
Problems Resolved:
Fixed these bugs:
Bug19: in 802.11a&802.11g,select WEP-PSK or WEP-EAP,the interface show incorrectly.
Firmware: v212eu-rc346
Hareware:6A1G
D-View : v2.12r08
Date: August 29, 2008
Problems Resolved:
Fixed these bugs:
Bug13: In key settings of authentication,if select another key size, then click "Apply", there will be a message error, at the same time, we can't change key's length, but it turns to previous key size..
Bug16: In 802.11a's access point mode, there is a problem about channel. The value of channe at Wreless page is different of at device info page.l

Firmware: v212eu-rc344
Hareware:6A1G
D-View : v2.12r07
Date: August 28, 2008
Problems Resolved:
Fixed these bugs:
Bug7: when select "browse",there is no file type and when select "upload", the function doesn't work.
Bug10: a little problem still exists in DVIEW MODULE v2.12 r06. The time should be 2008,but not 2007,please check it
Bug11: it still exists in Dview module v2.12 r06,we can enter characters in the frame. please chenck it.
Bug13: Firstly, select key type as ASCII, key size as 64 bits, we can only enter 5 characters. This is right.
Secondly, select key type as ASCII too, key size as 128 bits ,then "Apply", it will show a error message. but the key size change into 64bits,we can enter 13 characters..
Bug14: Suggest to add a "refresh" button,and achieve its function.
Bug15: The logo shows incorrectly.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point MIB file

Operating System

Software

Version

2.12

Size Driver

46KB

File Name

dwl-7100ap_mib_v212eu.mib

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-7100AP

Description

802.11a/g Tri-Mode Dualband Wireless Access Point AP Manager software

Operating System

Software

Version

1.12r02

Size Driver

1.9MB

File Name

dwl-7100ap_apmgr_v1-12r02.zip

Observations

The main panel of AP Manager

Item Description Result
1 Show a logo of device Pass
2 Discover device Function Pass
3 Set AP’s IP address Pass
Set AP’s Subnet mask Pass
4 Open the configuration window of AP Pass
5 Update firmware Pass
6 Access Password (Supports 12 characters ) Pass
Auto Refresh (the range is 1-300) Pass
Other parameters, such as: Setting Timeout Pass
7 Refresh the AP list Pass
8 About: show version of AP Manager Pass
9 Device list: Show AP’s basic information Pass
Action: Copy CFG, Paste CFG, Delete Pass
10 Action message Pass
Wizard
11 Old password (support 12 characters) Pass
12 New password, Confirm new password Pass
13 SSID(802.11a &802.11g) Pass
14 Channel(802.11a &802.11g) Pass
15 No Security Pass
16 WEP(64bits,128bits,152bits,ASCII,HEX) Pass
Device configuration panel

Item Description Result
1 Check All Pass
2 Clear Check Pass
3 Refresh Pass
4 Apply Pass
5 Open configuration file (Upload configuration file) Pass
6 Save configuration file (Download configuration file) Pass
7 Exit the configuration window Pass
General

Item Description Result
1 Device Name (support at most 42 characters) Pass
2 Dynamic IP (DHCP Client) Pass
Static IP (Manual) Pass
3 Load Balance (support 0-64 user) Pass
Link integrity Pass
4 Telnet Pass
Console timeout (1Min, 3Mins, 5Mins, 10Mins, 15Mins, Never) Pass
Wireless Function (802.11a & 802.11g)

Item Description Result
1 SSID (default setting:default) Pass
2 SSID Broadcast Pass
3 Channel (802.11a): Pass
Channel (802.11g): 1---13 Pass
4 Auto Channel Scan Pass
5 Super A (enable,disable) Pass
Super G(Disable,Super G without Turbo,Super G with dynamic turbo) Pass
6 Data Rate (802.11a): Auto, 6, 9, 12,18, 24, 36, 48, 54 Pass
Data Rate (802.11g): Auto, 1, 2, 5.5, 6, 9, 11, 12,18, 24, 36, 48, 54 Pass
7 Beacon Interval Pass
8 DTIM Pass
9 Fragmentation Length Pass
10 RTS Length Pass
11 Transmit Power Pass