Available 3 files for D-Link DWL-810+

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-810+

Description

802.11b Ethernet to Wireless LAN Client Adapter Firmware version 19

Operating System

Firmware

Size Driver

251KB

File Name

dwl-810plus_fw_v1.9.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-810+

Description

802.11b Ethernet to Wireless LAN Client Adapter Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

2.5MB

File Name

dwl-810plus_qig_103.pdf

Observations

Connecting the DWL-810+ to your
Ethernet-enabled device
A. First, connect the power adapter to the receptor at the back panel of the
DWL-810+ and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of an Ethernet cable (included) to the Ethernet port on the back
panel of the DWL-810+ and connect the other end to the Ethernet port located
on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop computer,
or network printer.) The LED light will blink when there is data tranfer
through the wireless connection. (Note: The Ethernet port on the DWL-810+
is Auto-MDI/MDIX. Meaning you can use a straight-through or crossovercable
to the Ethernet Port.)
C. The antenna is used by the DWL-810+ to connect to other 802.11b wireless
devices.

Connecting the DWL-810+ in
Infrastructure Mode

Connecting the DWL-810+ in Ad-Hoc
Mode

Web-based Configuration
Before You Begin the Configuration
• It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-810+. (Note: You also have the option of connecting the DWL-
810+ directly to the computer that will be used for configuration). The default IP
address for the DWL-810+ is 192.168.0.30 with a Subnet Mask of 255.255.255.0. You
will need to assign your computer a Static IP address within the same range as the
DWL-810+’s IP address for the purpose of configuring the DWL-810+. See the Manual
on the CD-ROM if you need assistance in assigning a Static IP address for your network
adapter.

Step 1 - Set up your new
password. You have the option
to establish a password.
Step 2 - Wireless Setup
The default wireless settings are:
SSID = default
Channel = 6
Operating Mode = Infrastructure
Click Site Survey to select a wireless
network or you can change the settings
manually to match an existing wireless
network.
Step 3 - Encryption
The DWL-810+ is capable of three
levels of wireless encryption - 64-bit,
128-bit, and 256-bit. By default the
encryption is disabled. You can
change the encryption settings for more
secure wireless communication.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-810+

Description

802.11b Ethernet to Wireless LAN Client Adapter Users Guide

Operating System

Manual

Size Driver

1.1MB

File Name

dwl-810plus_man_v102.zip

Observations

1. Package Contents ............................................. 3
2. Introduction........................................................ 4
3. Wireless Basics ................................................. 7
4. Getting Started ................................................ 10
5. Web Configuration........................................... 12
6. Troubleshooting............................................... 18
8. Technical Specifications .................................. 24
9. Contacting Technical Support.......................... 26
10. Warranty and Registration ............................... 27

Contents of Package:
• D-Link AirPlus DWL-810+ Ethernet-to-Wireless Bridge
• AC Power Adapter – 5V; 2.5A
• Manual and Warranty on CD
• Ethernet Cable (the DWL-810+ Auto MDI/MDIX Ethernet port works
with straight-through or crossover cable)
• Quick Installation Guide
If any of the above items are missing, please contact your reseller.
System Requirements for Configuration:
• A computer with an Ethernet adapter. (We recommend that you use
an Ethernet connection to configure the DWL-810+.)
• A current web-browser (e.g., Internet Explorer 6.0 or Netscape
Navigator 6.0 or later) for configuration
For Use: You will need an Ethernet-enabled device such as a game
console, laptop or desktop computer, network printer or set top box. The
DWL-810+ will transform virtually any Ethernet device into a wireless device,
enabling wireless communication over your network or in an ad-hoc/peer-topeer
mode.

Introduction
The D-Link AirPlus DWL-810+ Ethernet-to-Wireless Bridge is a device that
can be implemented in a variety of ways to provide wireless access by
converting an Ethernet connection. For devices with a built-in Ethernet port,
the DWL-810+ provides a cost effective way to gain wireless connectivity,
virtually transforming wired devices into wireless units! Connect any
Ethernet-enabled device to an existing 802.11b wireless network using the
DWL-810+.
Typical applications include connecting a printer to a wireless network and
connecting Ethernet-enabled devices such as game consoles or set top
boxes to a Wireless Local Area Network (WLAN). Simply connect the DWL-
810+ to the Ethernet (RJ-45) port of a network device, such as a network
storage device, Internet camera, network printer, network scanner, or other
similar device. Using the DWL-810+ allows the flexibility of placing network
devices in remote locations while maintaining a high-speed connection.
You can use the convenient Setup Wizard for the easy installation of your
DWL-810+. Whether you are using it in Ad-Hoc mode or Infrastructure mode,
you can begin with the Setup Wizard. Please refer to the Quick Installation
Guide that is included with your purchase for instructions on how to use the
Setup Wizard.
This manual provides a quick introduction to wireless technology and its
application as it relates to networking. Please take a moment to read through
this manual if you need to get acquainted with wireless technology.