Available 59 files for Emulex Dell LPe1105-M4
Select Files
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Firmware
Operating System
Firmware
Version
2.72a2
Size Driver
292KB
File Name
zf272a2.zip
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.46
Size Driver
176.6MB
File Name
elxlinuxapps-4.0a38-8.0.16.46-1-1.tar
Observations
RHEL 4.8 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and 64-bit architectures)
Note Requires driver update to the kernel. : Driver is in the kernel 2.6.5-7.311 and greater; and available from both Novell and Emulex as a driver update for kernel 2.6.5-7.308.
HBAnyware utility 4.0a38, Application helper module 2.0.38-1 HBAnyware 4.0a38 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 4.0a38
SSC version 4.0a38
DFC Library version 80.206-1
HBAAPI version 2.1.g
Multipulse version 3.0.30-1
IOCTL Module version 2.0.36-1
Dependencies:
lpfc driver version 8.0.16.46 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.22
Size Driver
198.5MB
File Name
elxlinuxapps-3.4a14-8.2.0.22-2-2.tar
Observations
Red Hat Enterprise Linux 5.2 and SUSE SLES 10 SP2 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
HBAnyware utility 3.4a14 (198 MB tar file)
HBAnyware 3.4a14 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.4a14
SSC version 3.4a14
DFC Library version 3.0.13-1
Lputil version
HBAAPI version 2.1.g
Dependencies:
lpfc driver version 8.2.0.22 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.48.2p
Size Driver
208.6MB
File Name
elxlinuxapps-4.1a36-8.2.0.48.2p-1-1.tar
Observations
Red Hat Enterprise Linux 5.4 and SUSE SLES 10 SP3 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware utility 4.1a36
HBAnyware 4.1a36 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 4.1a36
SSC version 4.1a36
DFC Library version 3.0.35-1-1
HBAAPI version 2.1.g
FCAUTHD version 1.20-1-1
Multipulse version 3.0.30-1
Dependencies:
lpfc driver version 8.2.0.48.2p or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Boot Code Documentation
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.31o SPARC
Size Driver
4.9MB
File Name
bootcode.pdf
Observations
Introduction..............................................................................................................1
Emulex Boot Code Files....................................................................................1
Boot from SAN.........................................................................................................2
Windows Server 2008 and Windows Server 2003.............................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (x86 and x64)..........................................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (Itanium)..................................................................3
New Installation of Windows 2008 UEFI- Aware Operating System
on a UEFI-based x64 Server.................................................................3
Direct a UEFI-Based Server to a Windows Server 2008 OS Image (Installed as UEFI-Aware) Already Installed on the SAN.......................4
The GUID Partition Table......................................................................4
Install Windows Server 2008 on an FC Boot Disk (x86, x64 and Itanium)...5
Install Windows Server 2003 on an FC Boot Disk (x86, and x64
and Itanium)................................................................................................6
Linux and VMware.............................................................................................7
Configure Boot from SAN on Linux or VMware (x86 and x64).....................7
Configure Boot from SAN on Linux (PowerPC)...........................................7
Configure Boot from SAN on Linux (Itanium)..............................................7
Solaris...............................................................................................................8
Configure Boot from SAN on Solaris SFS (x86 and x64)............................8
Determine LUNs to Select for Boot from SAN.......................................8
Configure Boot from SAN on Solaris SFS (SPARC)....................................8
Configure Boot from SAN on Solaris LPFC (SPARC)..................................9
Install Solaris from a Network Image..................................................10
Install Solaris by Migrating an Image from a Local SCSI Disk.............11
Install, Update and Enable Boot Code...................................................................14
BIOS Utility............................................................................................................15
Start the BIOS Utility.................................................................................15
Enable an Adapter to Boot from SAN........................................................17
Configure Boot Devices...................................................................................17
Configure Adapter Parameters........................................................................21
Change the Default AL_PA (Arbitrated Loop Physical Address)................22
Change the PLOGI Retry Timer................................................................23
Change Topology......................................................................................24
Enable or Disable the Spinup Delay..........................................................25
Set Auto Scan...........................................................................................26
Enable or Disable EDD 3.0.......................................................................27
Enable or Disable the Start Unit Command...............................................28
Enable or Disable the Environment Variable.............................................29
Enable or Disable Auto Boot Sector..........................................................30
Change Link Speed...................................................................................31
Reset to Default Values.............................................................................32
Use Multi-Path Boot from SAN..................................................................33
OpenBoot..............................................................................................................34
Attribute Commands.................................................................................34
Functional Commands..............................................................................35
EFIBoot.................................................................................................................37
Install the EFI Utility..................................................................................37
Start the EFI Utility....................................................................................38
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Release Notes
Information
Windows 2003-2008
Operating System
Manual
Version
2.20.006
Size Driver
26KB
File Name
driver_release_notes_b.pdf
Observations
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and Hotfix Q957910 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008, SP2 and Hotfix Q968675 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008 R2, no Hotfix is required
New features, fixed issues and known issues in the driver
New Features in Version 2.20.006
1. Added ExtTransferSize parameter. This parameter improves performance on tape devices supporting a larger block size.
2. Added support for Windows Server 2008 R2. This version of the driver kit adds support for Windows Server 2008 R2.
Resolved Issues in Version 2.20.006
1. There was the potential for the driver and the HBA to not synchronize properly, after the HBA was in warm start mode. Polling was modified in the HBAnyware utility.
2. The internal and external loopback diagnostic tests were not available for LP21000 and LP21002 adapters.
Known Issues in Version 2.20.006
1. The HBAnyware GUI is not available on the IA64 architecture. If you are installing on an IA64 system use the HBACMD command line utility, which is available in the Storport Miniport driver and core (CLI) application kit, instead of the Storport Miniport driver and HBAnyware kit.
Workaround: There is no workaround at this time.
2. Do not perform software-first installations on Windows Server 2008 or Vista systems. The procedure documented in the driver user manual might not have the expected effect. No error will be reported, but Windows might continue using the version of the driver distributed with the operating system rather than the new driver when an adapter is installed. The problem occurs because Microsoft-distributed drivers are versioned differently than Emulex- distributed drivers.
Workaround: There is no workaround at this time.
3. To revert to an older driver after a newer driver has been installed, you must uninstall all Emulex software and drivers before installing the older driver kit. Failure to do so could leave your system in an unsupported state. See the driver user manual for all the procedures you must follow.
Workaround: There is no workaround at this time.
4. Due to an issue with HBAnyware version 4.1, the default global driver parameters for converged network adapters (CNAs) cannot be changed.
Workaround: There is no workaround at this time.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.30j SPARC
Size Driver
1.3MB
File Name
manual.pdf
Observations
Instructions for using the sample migration scripts, as well as instructions for migrating from the LPFC driver to the SFS driver
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Boot Code Documentation
Information
Solaris 10 x64 and x86
Operating System
Manual
Version
2.31h x64 and x86
Size Driver
4.9MB
File Name
bootcode.pdf
Observations
Introduction..............................................................................................................1
Emulex Boot Code Files....................................................................................1
Boot from SAN.........................................................................................................2
Windows Server 2008 and Windows Server 2003.............................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (x86 and x64)..........................................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (Itanium)..................................................................3
New Installation of Windows 2008 UEFI- Aware Operating System
on a UEFI-based x64 Server.................................................................3
Direct a UEFI-Based Server to a Windows Server 2008 OS Image (Installed as UEFI-Aware) Already Installed on the SAN.......................4
The GUID Partition Table......................................................................4
Install Windows Server 2008 on an FC Boot Disk (x86, x64 and Itanium)...5
Install Windows Server 2003 on an FC Boot Disk (x86, and x64
and Itanium)................................................................................................6
Linux and VMware.............................................................................................7
Configure Boot from SAN on Linux or VMware (x86 and x64).....................7
Configure Boot from SAN on Linux (PowerPC)...........................................7
Configure Boot from SAN on Linux (Itanium)..............................................7
Solaris...............................................................................................................8
Configure Boot from SAN on Solaris SFS (x86 and x64)............................8
Determine LUNs to Select for Boot from SAN.......................................8
Configure Boot from SAN on Solaris SFS (SPARC)....................................8
Configure Boot from SAN on Solaris LPFC (SPARC)..................................9
Install Solaris from a Network Image..................................................10
Install Solaris by Migrating an Image from a Local SCSI Disk.............11
Install, Update and Enable Boot Code...................................................................14
BIOS Utility............................................................................................................15
Start the BIOS Utility.................................................................................15
Enable an Adapter to Boot from SAN........................................................17
Configure Boot Devices...................................................................................17
Configure Adapter Parameters........................................................................21
Change the Default AL_PA (Arbitrated Loop Physical Address)................22
Change the PLOGI Retry Timer................................................................23
Change Topology......................................................................................24
Enable or Disable the Spinup Delay..........................................................25
Set Auto Scan...........................................................................................26
Enable or Disable EDD 3.0.......................................................................27
Enable or Disable the Start Unit Command...............................................28
Enable or Disable the Environment Variable.............................................29
Enable or Disable Auto Boot Sector..........................................................30
Change Link Speed...................................................................................31
Reset to Default Values.............................................................................32
Use Multi-Path Boot from SAN..................................................................33
OpenBoot..............................................................................................................34
Attribute Commands.................................................................................34
Functional Commands..............................................................................35
EFIBoot.................................................................................................................37
Install the EFI Utility..................................................................................37
Start the EFI Utility....................................................................................38
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.31g SPARC
Size Driver
1.4MB
File Name
sfs_manual.pdf
Observations
Instructions for using the sample migration scripts, as well as instructions for migrating from the LPFC driver to the SFS driver
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Manual
Information
VMware ESX
Operating System
Manual
Version
7.4.0.41
Size Driver
1MB
File Name
vmware.pdf
Observations
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
Driver for VMware User Manual, version 7.4.0.41 (1.03 MB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Version 7.3.x Manual
Information
VMware ESX
Operating System
Manual
Version
7.3.2
Size Driver
1015KB
File Name
vmware.pdf
Observations
ESX 3.02, ESX 3.0.1, ESX 3.0. lpfc Driver 7.3.2_vmw (All) is embedded in the VMware releases
Emulex ESX Driver User Manual
Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Manual
Information
Windows 2003-2008
Operating System
Manual
Version
2.10a7
Size Driver
4.1MB
File Name
win.pdf
Observations
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Installation, Configuration and Troubleshooting (2,918 KB pdf file) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware User Manual
Information
Windows 2003-2008
Operating System
Manual
Version
2.10a7
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware User Manual
Information
VMware ESX
Operating System
Manual
Version
8.2.030.52
Size Driver
3.9MB
File Name
hbanyware34_preliminary.pdf
Observations
ESX 4.0/4.0 U1 lpfc Driver 8.2.030.52 is embedded in the VMware release.
HBAnyware Utility User Manual Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 2
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 9
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................. 10
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Changing HBA Names .................................................................................... 15
Discovering HBAs ........................................................................................... 16
Automatic Fibre Channel Discovery .......................................................... 16
Remote SAN Management Using TCP/IP Access Protocol....................... 16
Adding a Single Host .......................................................................... 17
Adding a Range of Hosts .................................................................... 18
Removing Hosts.................................................................................. 19
Configuring Discovery Settings ................................................................. 19
Sorting HBA Information.................................................................................. 20
Viewing Remote and Local HBAs.............................................................. 20
Viewing HBA Information................................................................................. 21
Viewing Discovery Information .................................................................. 21
Viewing Host Information .......................................................................... 22
The Host Information Tab.................................................................... 22
The Driver Parameters Tab................................................................. 23
Viewing General HBA Attributes ............................................................... 24
Viewing Detailed HBA Information ............................................................ 26
Viewing Fabric Information........................................................................ 28
Viewing Target Information........................................................................ 29
Viewing LUN Information........................................................................... 30
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 31
Viewing Port Statistics............................................................................... 33
Viewing Firmware Information ................................................................... 35
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 36
Viewing Target Mapping (Linux) ................................................................ 37
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware User Manual
Information
VMware ESX
Operating System
Manual
Version
7.4.0.41
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware User Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.46
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
RHEL 4.8 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and 64-bit architectures)
Note Requires driver update to the kernel. : Driver is in the kernel 2.6.5-7.311 and greater; and available from both Novell and Emulex as a driver update for kernel 2.6.5-7.308.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware Manual
Information
VMware ESX
Operating System
Manual
Version
7.3.2
Size Driver
3.9MB
File Name
hbanyware34_preliminary.pdf
Observations
ESX 3.02, ESX 3.0.1, ESX 3.0. lpfc Driver 7.3.2_vmw (All) is embedded in the VMware releases
HBAnyware Utility User Manual Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 2
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 9
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................. 10
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Changing HBA Names .................................................................................... 15
Discovering HBAs ........................................................................................... 16
Automatic Fibre Channel Discovery .......................................................... 16
Remote SAN Management Using TCP/IP Access Protocol....................... 16
Adding a Single Host .......................................................................... 17
Adding a Range of Hosts .................................................................... 18
Removing Hosts.................................................................................. 19
Configuring Discovery Settings ................................................................. 19
Sorting HBA Information.................................................................................. 20
Viewing Remote and Local HBAs.............................................................. 20
Viewing HBA Information................................................................................. 21
Viewing Discovery Information .................................................................. 21
Viewing Host Information .......................................................................... 22
The Host Information Tab.................................................................... 22
The Driver Parameters Tab................................................................. 23
Viewing General HBA Attributes ............................................................... 24
Viewing Detailed HBA Information ............................................................ 26
Viewing Fabric Information........................................................................ 28
Viewing Target Information........................................................................ 29
Viewing LUN Information........................................................................... 30
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 31
Viewing Port Statistics............................................................................... 33
Viewing Firmware Information ................................................................... 35
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 36
Viewing Target Mapping (Linux) ................................................................ 37
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.31g SPARC
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
Instuctions for using the HBAnyware utility Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
HBAnyware Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.30j SPARC
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Instuctions for using the HBAnyware utility Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Manual
Information
Solaris 10 x64 and x86
Operating System
Manual
Version
2.40s x64 and x86
Size Driver
808KB
File Name
sfs_utilities.pdf
Observations
Instructions for using the FCA utilities
Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Command Usage ...................................................................................... 14
Using the emlxdrv Utility ........................................................................................ 30
Modes of Operation (emlxdrv) ......................................................................... 30
Interactive Mode (emlxdrv)........................................................................ 30
CLI Mode (emlxdrv)................................................................................... 32
Command Descriptions (emlxdrv) ................................................................... 33
Command Usage ...................................................................................... 33
This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.40s SPARC
Size Driver
808KB
File Name
sfs_utilities.pdf
Observations
Instructions for using the FCA utilities
Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Command Usage ...................................................................................... 14
Using the emlxdrv Utility ........................................................................................ 30
Modes of Operation (emlxdrv) ......................................................................... 30
Interactive Mode (emlxdrv)........................................................................ 30
CLI Mode (emlxdrv)................................................................................... 32
Command Descriptions (emlxdrv) ................................................................... 33
Command Usage ...................................................................................... 33
This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Manual
Information
Solaris 10 x64 and x86
Operating System
Manual
Version
2.31h x64 and x86
Size Driver
876KB
File Name
sfs_utilities.pdf
Observations
Instructions for using the FCA utilities
Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Using the emlxdrv Utility ........................................................................................ 31
Modes of Operation (emlxdrv) ......................................................................... 31
Interactive Mode (emlxdrv)........................................................................ 31
CLI Mode (emlxdrv)................................................................................... 33
Command Descriptions (emlxdrv) ................................................................... 33
This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.31g SPARC
Size Driver
1024KB
File Name
sfs_utilities.pdf
Observations
Instructions for using the FCA utilities
Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Command Usage ...................................................................................... 14
Using the emlxdrv Utility ........................................................................................ 30
Modes of Operation (emlxdrv) ......................................................................... 30
Interactive Mode (emlxdrv)........................................................................ 30
CLI Mode (emlxdrv)................................................................................... 32
Command Descriptions (emlxdrv) ................................................................... 33
Command Usage ...................................................................................... 33
This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.31o SPARC
Size Driver
876KB
File Name
sfs_utilities.pdf
Observations
Instructions for using the FCA utilities
Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Using the emlxdrv Utility ........................................................................................ 31
Modes of Operation (emlxdrv) ......................................................................... 31
Interactive Mode (emlxdrv)........................................................................ 31
CLI Mode (emlxdrv)................................................................................... 33
Command Descriptions (emlxdrv) ................................................................... 33
This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.20a3
Size Driver
3.7MB
File Name
manual.pdf
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.11a3
Size Driver
4.1MB
File Name
win.pdf
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
1.03a9 x86, IA64 and x64
Size Driver
4.1MB
File Name
win.pdf
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Linux User Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.46
Size Driver
1MB
File Name
linux8x.pdf
Observations
RHEL 4.8 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and 64-bit architectures)
Note Requires driver update to the kernel. : Driver is in the kernel 2.6.5-7.311 and greater; and available from both Novell and Emulex as a driver update for kernel 2.6.5-7.308.
Driver for Linux User Manual (1.53 MB pdf file) Chapter 1 Introduction
Purpose of this document................................................................ 12
Host connectivity .............................................................................. 12
Fibre Channel ..............................................................................12
Fibre Channel over Ethernet .....................................................12
EMC storage array-specific settings............................................... 13
Boot device support.......................................................................... 13
Zoning ................................................................................................ 14
Useful Linux utilities and functions............................................... 14
Chapter 2 Installation Steps
Prerequisites for first-time installation .......................................... 16
Summary of installation steps......................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .....................22
Chapter 3 Installing and Configuring the BIOS Settings
Verifying and updating the Emulex boot BIOS............................ 28
Verifying the correct BIOS version...........................................28
Updating the boot BIOS.............................................................29
Method One — Updating the adapter boot BIOS with
hbacmd............................................................................................... 30
Method Two – Booting from a DOS bootable diskette and
using the lp6dutil utility .................................................................. 33
Chapter 4 Installing and Configuring the Driver
Installation instructions for the Emulex v8.x-series driver......... 36
Downloading the Emulex v8.x-series adapter driver for
the v2.6.x kernel .......................................................................... 37
Installing the Emulex CNA v8.x-series driver on RHEL
5.2 and SLES 10 SP2 hosts ......................................................... 38
Installing the Emulex v8.x-series driver on SLES 9 SP1
hosts.............................................................................................. 39
Installing the Emulex v8.x-series driver on RHEL 4
hosts.............................................................................................. 42
Included Emulex driver on RHEL 4, RHEL 5, OEL 4,
OEL 5, Asianux 2.0, Asianux 3.0, SLES 9, and SLES 10 ........ 45
Uninstalling the Emulex v8.x-series driver................................... 47
Installing the Emulex HBAnywhere applications kit.................. 48
Editing the configuration files ........................................................ 51
Description of the Emulex lpfc driver parameters ................ 51
Descriptions of the Emulex parameters .................................. 52
Editing the Emulex driver parameters on hosts with
SLES 9 and SLES 10 .................................................................... 54
Editing the Emulex driver parameters on hosts with
RHEL 4 and RHEL 5 .................................................................. 55
Editing the Emulex driver parameters on hosts with
Asianux 2.0 and Asianux 3.0..................................................... 56
Editing the Emulex driver parameters on hosts with
OEL 4 and OEL 5 ........................................................................ 57
Exercising the Emulex v8.x-series device driver.......................... 58
Loading and unloading the Emulex v8.x-series driver......... 58
Target information exported to the /proc filesystem ........... 59
Dynamically modifying the driver and device
information exported to the /sys filesystem.......................... 59
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Manual
Information
Solaris 10 SPARC
Operating System
Manual
Version
2.30j SPARC
Size Driver
863KB
File Name
sfs_utilities.pdf
Observations
Instructions for using the FCA utilities (862 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Emulex ESX Driver Version 7.4.x User Manual
Information
VMware ESX
Operating System
Manual
Version
8.2.030.52
Size Driver
1016KB
File Name
vmware.pdf
Observations
ESX 4.0/4.0 U1 lpfc Driver 8.2.030.52 is embedded in the VMware release.
Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Version 7.4.x Manual
Information
VMware ESX
Operating System
Manual
Version
7.4.0.13
Size Driver
1016KB
File Name
vmware.pdf
Observations
ESX 3.5 U1; ESX 3.5.2 - lpfc Driver 7.4.0.13 is embedded in the VMware release
Emulex ESX Driver User Manual
Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems NOT Running EMC's PowerPath Application
Operating System
Solaris 10 SPARC
Version
2.40s SPARC
Size Driver
30.2MB
File Name
solaris-4.1a37-1.03h-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems NOT running EMC's PowerPath application. It contains support for Emulex NPIV Virtual HBA Architecture, and NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.1a37, emlxadm version 1.03h and emlxdrv version 1.00m for SPARC
HBAnyware 4.1a37 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.40 or later (provided by Sun)
EMLXemlxu utility package 1.03h or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
under earlier versions.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
The HBAnyware, HBAnywareSSC and HbaCmd target OS versions are Solaris 5.10 and 5.11.
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.1a37-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.1a37-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems NOT Running EMC's PowerPath Application
Operating System
Solaris 10 SPARC
Version
2.31o SPARC
Size Driver
21.8MB
File Name
solaris-4.0a33-1.02k-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems NOT running EMC's PowerPath application. It contains support for Emulex NPIV Virtual HBA Architecture, and NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.0a33, emlxadm version 1.02k for x64 and x86
HBAnyware 4.0a33 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.31 or later (provided by Sun)
EMLXemlxu utility package 1.02k or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
The HBAnyware, HBAnywareSSC and HbaCmd target OS version is Solaris 5.10.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.0a33-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.0a33-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems Running EMC's PowerPath Application
Operating System
Solaris 10 SPARC
Version
2.31o SPARC
Size Driver
21.8MB
File Name
solaris-4.0a33-1.02kx1-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems running EMC's PowerPath application. It does not contain support for Emulex NPIV Virtual HBA Architecture since NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.0a33, emlxadm version 1.02k for x64 and x86
Dependencies:
SUNWemlxs driver 2.31 or later (provided by Sun)
EMLXemlxu utility package 1.02k or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
The HBAnyware, HBAnywareSSC and HbaCmd target OS version is Solaris 5.10.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.0a33-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.0a33-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems Running EMC's PowerPath Application
Operating System
Solaris 10 SPARC
Version
2.40s SPARC
Size Driver
30.2MB
File Name
solaris-4.1a37-1.03hx1-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems running EMC's PowerPath application. It does not contain support for Emulex NPIV Virtual HBA Architecture since NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.1a37 and emlxadm version 1.03h
HBAnyware 4.1a37 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.40 or later (provided by Sun)
EMLXemlxu utility package 1.03h or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
under earlier versions.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
The HBAnyware, HBAnywareSSC and HbaCmd target OS versions are Solaris 5.10 and 5.11.
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.1a37-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.1a37-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Utilities
Operating System
Solaris 10 SPARC
Version
2.30j SPARC
Size Driver
18MB
File Name
solaris-3.4a14-1.02d-1a.tar
Observations
HBAnyware version 3.4a14, emlxadm version 1.02d and emlxdrv version 1.00l for SPARC
HBAnyware 3.4a14 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.30h or later (provided by Sun)
EMLXemlxu utility package 1.02d or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
The HBAnyware, HBAnywareSSC and HbaCmd target OS version is Solaris 5.10.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-3.4a14-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-3.4a14-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Sample Migration Scripts
Operating System
Solaris 10 SPARC
Version
2.30j SPARC
Size Driver
103KB
File Name
leadville_migrate_1.0a6.tar
Observations
These unsupported sample script files can help you migrate from the Solaris lpfc driver to the Solaris SFS driver. You can customize these scripts and run them to automate the migration process.
Solaris Instructions for Migration of Emulex Host Bus Adapters to Leadville Stack
Prerequisites:
1. Solaris packages SUNWemlx, lpfc, and HBAnyware must be installed on the machine.
2. all candidate migration candidate adapters must have fcode version 1.50a4 or later
Note:
Scripts unable to migrate machines with Emulex adapter as boot device for that machine.
Migration Steps:
1. run ./start_emlxs_migration.sh script
2. after script has finished successfully, reboot system as requested
3. run ./finish_emlxs_migration.sh script
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems NOT Running EMC's PowerPath Application
Operating System
Solaris 10 x64 and x86
Version
2.40s x64 and x86
Size Driver
30.2MB
File Name
solaris-4.1a37-1.03h-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems NOT running EMC's PowerPath application. It contains support for Emulex NPIV Virtual HBA Architecture, and NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.1a37 and emlxadm version 1.03h
HBAnyware 4.1a37 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.40 or later (provided by Sun)
EMLXemlxu utility package 1.03h or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
under earlier versions.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
The HBAnyware, HBAnywareSSC and HbaCmd target OS versions are Solaris 5.10 and 5.11.
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.1a37-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.1a37-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems Running EMC's PowerPath Application
Operating System
Solaris 10 x64 and x86
Version
2.31t x64 and x86
Size Driver
21.8MB
File Name
solaris-4.0a33-1.02kx1-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems running EMC's PowerPath application. It does not contain support for Emulex NPIV Virtual HBA Architecture since NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.0a33, emlxadm version 1.02k for x64 and x86
Dependencies:
SUNWemlxs driver 2.31 or later (provided by Sun)
EMLXemlxu utility package 1.02k or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
The HBAnyware, HBAnywareSSC and HbaCmd target OS version is Solaris 5.10.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.0a33-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.0a33-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems NOT Running EMC's PowerPath Application
Operating System
Solaris 10 x64 and x86
Version
2.31t x64 and x86
Size Driver
21.8MB
File Name
solaris-4.0a33-1.02k-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems NOT running EMC's PowerPath application. It contains support for Emulex NPIV Virtual HBA Architecture, and NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.0a33, emlxadm version 1.02k for x64 and x86
HBAnyware 4.0a33 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.31 or later (provided by Sun)
EMLXemlxu utility package 1.02k or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
The HBAnyware, HBAnywareSSC and HbaCmd target OS version is Solaris 5.10.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.0a33-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.0a33-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
FCA Utilities Kit for Systems Running EMC's PowerPath Application
Operating System
Solaris 10 x64 and x86
Version
2.40s x64 and x86
Size Driver
30.2MB
File Name
solaris-4.1a37-1.03hx1-1a.tar
Observations
The Solaris 10 FCA Utilities kit below is intended for use with systems running EMC's PowerPath application. It does not contain support for Emulex NPIV Virtual HBA Architecture since NPIV can not coexist with PowerPath on Solaris based systems. Also Note: Part of the utility package includes an emlxu_remove script. If you run this script, it will invoke a Sun utility that asks "do you want to continue". Since emlxu_remove can not communicate with the Sun owned utility, a "no" answer is ignored.
HBAnyware version 4.1a37 and emlxadm version 1.03h
HBAnyware 4.1a37 Solaris Installation Instructions
Dependencies:
SUNWemlxs driver 2.40 or later (provided by Sun)
EMLXemlxu utility package 1.03h or later (included with the applications kit)
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must be installed. HBAnyware will not run
under earlier versions.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be added to the beginning of
the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include
this path in your PATH environment variable. (bash> export PATH="/usr/java/bin:$PATH")
The HBAnyware, HBAnywareSSC and HbaCmd target OS versions are Solaris 5.10 and 5.11.
HBAnyware is dependent on the SUNWemlxs driver package and the EMLXemlxu utilities package being installed.
Please ensure that these packages are installed before installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Unzip the file: gunzip HBAnyware-4.1a37-i386.tar.gz
3. Untar the file: tar -xvf HBAnyware-4.1a37-i386.tar
4. Run the pkgadd utility: pkgadd -d .
5. When prompted by pkgadd, choose to install HBAnyware
6. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Run the script /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Library and Utilities Kit
Operating System
VMware ESX
Version
7.4.0.13
Size Driver
278KB
File Name
elxvmwarecorekit-2.1a38-1.i386.rpm
Observations
ESX 3.5 U1; ESX 3.5.2 - lpfc Driver 7.4.0.13 is embedded in the VMware release
HBAnyware 2.1a38 agent, hbacmd (278 KB rpm file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Library and Utilities Kit
Operating System
VMware ESX
Version
8.2.030.52
Size Driver
300KB
File Name
elxvmwarecorekit-2.1a40-1.i386.rpm
Observations
ESX 4.0/4.0 U1 lpfc Driver 8.2.030.52 is embedded in the VMware release.
HBAnyware 4.0a44 agent, hbacmd (278 KB rpm file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Applications Kit
Operating System
VMware ESX
Version
7.4.0.41
Size Driver
931KB
File Name
elxvmwarecorekit-esx35-4.0a45-1.i386.rpm
Observations
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
HBAnyware 4.0a45 agent, hbacmd, HP Rubah library version 9.0 (932 KB rpm file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver 64-bit
Operating System
Windows 2000-2003
Version
1.02a3
Size Driver
6.7MB
File Name
storport-6-1.02a3-2b.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.0a13 and lputil64 version 1.7a16
This kit contains the following components:
elxstorinstall6102a3dc.zip - Emulex Fibre Channel StorPort Miniport Driver
Emlx64Apps300a5.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the elxstorinstall6102a3dc.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
Emlx64Apps300a5.zip package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
AutoPilot Install Kit
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
15MB
File Name
storportminiportkit_1-11a0-1c.exe
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and lputilnt version 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver
Operating System
Windows 2000-2003
Version
1.03a9 x86, IA64 and x64
Size Driver
11.2MB
File Name
storport-5-1.03a9-1d.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a9 and lputilnt version 1.8a2
This kit contains the following components:
elxstorinstall5103a9dc.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a9-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver 32-bit
Operating System
Windows 2000-2003
Version
1.02a3
Size Driver
5.6MB
File Name
storport-5-1.02a3-1b.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.0a13 and lputil64 version 1.7a16
This kit contains the following components:
elxstorinstall5102a3c.zip - Emulex Fibre Channel StorPort Miniport Driver
EmlxApps300a5.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the elxstorinstall5102a3c.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
EmlxApps300a5.zip package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Legacy Install Kit x64
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
12.6MB
File Name
storport-7-1.11a0-1e.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17
This kit contains the following components:
elxstorinstall7111a0c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Legacy Install Kit x86
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
12.6MB
File Name
storport-5-1.11a0-1e.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17
This kit contains the following components:
elxstorinstall5111a0c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Legacy Install Kit IA64
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
12.9MB
File Name
storport-6-1.11a0-1c.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17
This kit contains the following components:
elxstorinstall6111a0dc.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.30a9
Size Driver
24.2MB
File Name
emcstorportminiportkit_1-30a9-1e.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix KB943545 is required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a18 (24.6 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.11a3
Size Driver
15.1MB
File Name
storportminiportkit_1-11a3-1b.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 2.1a21 and lputilnt version 1.8a18 (15.5 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.20a3
Size Driver
19MB
File Name
storportminiportkit_1-20a3-1h.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 3.0 (19.5 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.30a6
Size Driver
24MB
File Name
emcstorportminiportkit_1-30a6-1b.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a18 (24.6 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Kit
Operating System
Windows 2003
Version
2.01a4
Size Driver
8.8MB
File Name
storportminiportkit_2-01a4-1g.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Driver 2.01a4 can be used to new install new Boot from SAN configurations with SP2. After the installation completes and the system reboots, install STORPort hotfix Q943545. The HBAnyware management application can be installed with the full Storport Miniport kit or by manually installing the Emulex PLUS driver and the driver utilities package.
Driver 2.01a4 cannot be used to directly install new Boot from SAN configurations with SP1. With SP1, new Boot from SAN configurations require the initial installation to be done with driver 1.30a9. Once the OS is installed, then upgrade to SP2 and STORPort hotfix Q943545 before upgrading to driver 2.01a4.
Base driver, HBAnyware utility 3.4a9 (9.21 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Kit
Operating System
Windows 2003-2008
Version
2.10a7
Size Driver
11.6MB
File Name
storportminiportkit_2-10a7-1e.exe
Observations
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.0a32 (11.6 MB exe file) For Windows 2008 and Windows 2003. This kit supports the standard Microsoft Windows releases and should be used except for use with Microsoft Windows Core Server
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Core Installation Driver Kit
Operating System
Windows 2003-2008
Version
2.10a7
Size Driver
2.8MB
File Name
storportminiportcorekit_2-10a7-1e.exe
Observations
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.0a32 CLI (2.82 MB exe file) For Windows 2008 use with Microsoft Windows Core Server, where no GUIs are available during installation. This kit differs from the standard driver kit. HBAnyware includes command line support only. The Windows Core kit today is used for operation under Microsoft HyperV
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex Dell LPe1105-M4
Description
Driver Kit
Operating System
Windows 2003-2008
Version
2.20.006
Size Driver
37.1MB
File Name
storportminiportkit_2.20.006-1h.exe
Observations
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and Hotfix Q957910 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008, SP2 and Hotfix Q968675 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008 R2, no Hotfix is required
Base driver, HBAnyware utility 4.1a35 (34.7 MB exe file) For Windows 2008 and Windows 2003. This kit supports the standard Microsoft Windows releases and should be used except for use with Microsoft Windows Core Server
Access to Official Website Emulex
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.