Available 5 files for Emulex LP7000E-EMC
Select Files
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP7000E-EMC
Description
Open Boot
Operating System
Boot Code
Version
1.32a0
Size Driver
26KB
File Name
so132a0.zip
Observations
Platform: Intel Itanium (64-bit) This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\readme.txt This file you are reading
\SO132A0.PRG Lp7000 Open Firmware 1.32A0
\DO132A0.PRG Lp8000 Open Firmware 1.32A0
\CO132A0.PRG Lp9000 Open Firmware 1.32A0
\HO132A0.PRG Lp9802 Open Firmware 1.32A0
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
--------------------------------------------------------------
----------------------- NEW CHANGES 1.30a5 ------------------------
1. Fixed bug on inputting a invalid LUN number got an "Unexpected SCSI
command encountered.", then tried a good command, and cause the
machine hung.
2. Fixed bug on inputting a invalid WWPN number and continue to access
LOGO and PLOGI instead of exit.
3. Disable the message "Can't open disk label package" on IBM machine
for non-bootable disks.
----------------------- NEW CHANGES 1.30a6 ------------------------
1. Bug fixed for FCODE map-in doesn't match decoded register error.
Especially for true 64-bit machine.
2. Bug fixed for "Error: can't free iommu-list" due to the data
structure memory allocation problem on true 64-bit machine.
3. Enhanced the behavior to relogin if a target logs out during
the boot sequence.
4. Added auto-topology support - try coming up in point to point
mode first, if unsuccessful try coming up in loop mode. This
release can not set loop only or point to point only mode. These
topology options will be added to the next release.
5. Fixed bug to check the FCP_RSP_LEN_VALID bit in the FCP_RESP frame,
before using the FCP_RSP_LEN field to calculate the starting
address of the sense data.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP7000E-EMC
Description
x86 BootBIOS
Operating System
Boot Code
Version
1.61a1
Size Driver
39KB
File Name
lp7000_b161a1.zip
Observations
BootBIOS for x86 platforms and x64 platforms that support legacy BIOS. The current BIOS provides x86 boot capability through the use of INT13 system
BIOS calls. The BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
(2) Multi-initiators: Upto 8 adapters in a system
(3) Multi-LUNs: Upto 256 LUNs
(4) Multi-boot: it complies with the BIOS Boot Specification (BBS).
(5) EDD (Enhanced Disk Drive Services): it supports both EDD 3.0 and EDD 2.1
depending selection in BIOS Utility.
(6) Boot fail over feature: it is always there since BIOS version 1.20. There
are eight boot entries that can be configured. If the first boot entry failed
for whatever reason, it is still able to boot from the second configured boot
entry and so on.
\B161A1.txt the file you are reading
\SB161A1.PRG Lp7000 BIOS version 1.61A1
Although a specific BIOS file for the LP6000 does not exist, all current
versions of BIOS will scan and process any LP6000 Adapters in the system.
***** Important Note ******
(1) BIOS downloading
This version of BIOS image had increased size from 42K to 44K. As a result, it might
fail during the downloading BIOS .prg file. One way to correct the problem is to
download whenever the firmware .AWC WITHOUT BIOS image (for example: dd380a0.awc).
Then, downloading the BIOS .prg file.
(2) BIOS was not activated (Enabled)
If the adapter BIOS is not activated (enabled) by LP6dutil or other O.S. utility,
this adapter would not be configured. Also, there is "No BIOS support" message next
to this adapter in BIOS Utility. User must use LP6dutil or other O.S. Utility to
activate (enabled) the BIOS in order to make this card bootable.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP7000E-EMC
Description
Driver Kit
Operating System
FC Port Driver
Version
2.22a8
Size Driver
5.4MB
File Name
port-5-2.22a8-3a.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 200
Base driver, Emulex Configuration Utility (elxcfg) version 1.41a14 This kit contains the following components:
sli222a8win2ks.zip - Emulex Fibre Channel Multi-protocol Port Driver
EmlxApps300a7.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the sli222a8win2ks.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
EmlxApps300a7.zip package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP7000E-EMC
Description
Firmware
Operating System
Firmware
Version
3.30a7
Size Driver
1.1MB
File Name
sf330a7.zip
Observations
Support Resources for Symmetrix and CLARiiON Compatibility:
This software kit supports the following PCI host adapters:
LP7000 LP7000E
This kit includes the following files. Those marked with a "plus"
sign (+) are available from the Emulex website.
README.TXT The file you are reading
C311REL.TXT Combination BootBIOS and OpenBoot release notes
B160REL.TXT BootBIOS release notes
O131REL.TXT OpenBoot release notes
SFC330a7.DWC Firmware files for the HBA, with BootBIOS
SFC330a7.AWC + Firmware files with loader and BootBIOS
SF330a7.* + Firmware files without BootBIOS
/prg_kit/*.* The individual SLI, BIOS, POST, and Config files
which can be used to create the firmware above
LP6DUTIL.TXT LP6DUTIL text-based software manual
LP6DUTIL.EXE LP6000/7000/8xxx/9xxx DOS-based diagnostic 8.7a8
DEV_ID.* Info and utilities for setting unique PCI ID values
SFPLUS1.CFL Configuration file to allow PCI ID = F701
FDEFAULT.CFL Configuration file to allow PCI ID = 1AE5
SDEFAULT.CFL Configuration file for restoring PCI ID to default
Changes and Corrections:
Inactive exchange control blocks now have their X_ID obscured to insure
that they will not affect active exchanges.
(CR 3916, 3917, 3653, 3656)
Adapter firmware invalidly resets the sequence flags on an S_ID mismatch.
This was found only under very heavy load, in extreme circumstances,
in target mode. This has been fixed.
(CR 3792, 3791)
Improved operation of E_D_TOV timer when closing exchange.
(CR 3794, 3793)
Corrected self-test problem reporting wrong internal test number.
(CR 3788, 3803)
Improved wake-up failure reporting capability. Added the ability to
read the additional wake-up errors from SLIM memory. (CR 3804, 3807)
Due to the length of time required to close out an aborted exchange with
a remote port which is not responding, the "early abort notification" is
now forced into the active state for timed-out commands. (CR 3853, 3854)
Solved a timeout problem when switching from LOOP to P2P when connected
to a switch port. (CR 3806, 3856)
Added extra delay to TX/RX DMA timeout trap to allow for special PCI
bus designs. (CR 3860, 3861)
Corrected HBA memory initialization problem with the Boot BIOS utility
setting P2P mode on the LP8000. (CR 3647)
Corrected response to READ_LA mailbox command so that valid current and
link down state information is returned. (CR 3630, 3635)
A method of detecting and correcting a single-bit FLASH error was added
for the 128K FLASH boot sector. This addresses all known instances of
charge migration in the FLASH. (CR 3709, 3710)
An alternate method of handling PCI Lock during self-test was put into
place to significantly lower the chances of a self-test failure hanging
the PCI bus. (CR 3707, 3708)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP7000E-EMC
Description
Manual
Information
FC Port Driver
Operating System
Manual
Version
2.22a8
Size Driver
4.1MB
File Name
win.pdf
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 200
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Access to Official Website Emulex
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.