Available 44 files for Emulex LP8000-EMC
Select Files
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
x86 BootBIOS
Operating System
Boot Code
Version
2.01a2
Size Driver
38KB
File Name
db201a2.zip
Observations
BootBIOS for x86 platforms and x64 platforms that support legacy BIOS. The adapter boot BIOS provides x86 boot capability through the use of INT13
system BIOS calls. The adapter Boot BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
topologies.
(2) Multi-initiators: The adapter BIOS supports up to 32 Emulex LightPulse
adapters in a system.
(3) Multi-LUNs: The adapter BIOS supports up to 256 LUNs.
(4) Multi-boot: The adapter BIOS complies with the BIOS Boot Specification
(BBS).
(5) EDD (Enhanced Disk Drive Services): The adapter BIOS supports both the
EDD 3.0 and EDD 2.1 specifications depending on the selection in the
adapter BIOS configuration utility.
(6) Boot fail over feature: There are eight boot entries that can be
configured in the adapter BIOS configuration utility. If the first boot
entry fails the system is still able to boot from the second configured
boot entry and so on.
\2.01a2.txt this file you are reading
\DB201a2.PRG Lp8000 adapter boot BIOS version 2.01a2
\CB201a2.PRG Lp9000 adapter boot BIOS version 2.01a2
\HB201a2.PRG Lp9802 adapter boot BIOS version 2.01a2
\TB201a2.PRG Lp10000 adapter boot BIOS version 2.01a2
\BB201a2.PRG Lp11000 adapter boot BIOS version 2.01a2
\QB201a2.PRG Lp850 adapter boot BIOS version 2.01a2
\RB201a2.PRG Lp952 adapter boot BIOS version 2.01a2
\LB201a2.PRG Lp982 adapter boot BIOS version 2.01a2
\MB201a2.PRG Lp1050 adapter boot BIOS version 2.01a2
\JB201a2.PRG Lp1150 adapter boot BIOS version 2.01a2
\EB201a2.PRG Lp101 adapter boot BIOS version 2.01a2
\YB201a2.PRG LPe111 adapter boot BIOS version 2.01a2
\WB201a2.PRG LPe1150 adapter boot BIOS version 2.01a2
\ZB201a2.PRG LPe11000 adapter boot BIOS version 2.01a2
\UB201a2.PRG LPe12000 adapter boot BIOS version 2.01a2
\OB201a2.PRG LPe1250 adapter boot BIOS version 2.01a2
\PB201a2.PRG LPe121 adapter boot BIOS version 2.01a2
***** Important Note ******
(1) BIOS downloading
The adapter boot BIOS image has increased in size to 49K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the
problem is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc) and then download the adapter boot BIOS .prg file.
(2) BIOS was not activated (Enabled)
If the adapter boot BIOS is not enabled by LP6DUTIL or an Emulex O.S.
configuration utility, the adapter and the drives connected to the adapter
cannot not be configured to be used to boot the system. In addition if there is
a "No BIOS support" message displayed next to this adapter in the adapter BIOS
configuration utility the user must use LP6DUTIL or other Emulex O.S.
configuration utility to enable the adapter boot BIOS in order to allow this adapter
to be used a bootable controller by the host system.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Open Boot
Operating System
Boot Code
Version
1.41a4
Size Driver
27KB
File Name
do141a4.zip
Observations
Platform: Intel Itanium (64-bit) This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\readme.txt This file you are reading
\SO141a4.PRG Lp7000 Open Firmware 1.41a4
\DO141a4.PRG Lp8000 Open Firmware 1.41a4
\CO141a4.PRG Lp9000 Open Firmware 1.41a4
\HO141a4.PRG Lp9802 Open Firmware 1.41a4
\TO141a4.PRG Lp10000 Open Firmware 1.41a4
\SO141a4.img Lp7000 Open Firmware 1.41a4 for image file
\DO141a4.img Lp8000 Open Firmware 1.41a4 for image file
\CO141a4.img Lp9002 Open Firmware 1.41a4 for image file
\HO141a4.img Lp9802 Open Firmware 1.41a4 for image file
\TO141a4.img Lp10000 Open Firmware 1.41a4 for image file
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.41A4 ------------------------
1. The "ct-req" info. was erased by adding the "memory erase" function
before "ct-req" dma-free in previous release which cause the fcode
fail to see the target in fabric mode, the new fixed is removed the
"memory erase" function from "ct-req" before the dma-free. (CR11852)
----------------------- NEW CHANGES 1.41A3 ------------------------
1. In some system server, during the DR, there is a WARNING message
with memory leaked issue. The new release corrected this issue by
adding additional memory erase functions to set to 0 all the previously
obtained dma memory before the fcode released out the dma and virtual
address mappings by dma-map-out and dma-free. (CR11350 & CR11351)
2. In the universal boot code, during the boot time, there is an
warning message "Warning: Fcode sequence resulted in a net stack
depth change of 1", the new release fixed issue by remove some
unnecessarily call function in the fcode. (CR11538)
3. In some system, if the HBA was fail on the initialization by pulling
or remove the cable during boot time, the .properties command in the
ok prompt will display the wrong mode number of the HBA. The new
fixed will not show any model number of the HBA in this scenario. If
the system initize the HBA properly, it will display the correct
model number of the HBA. (CR9842)
4. Added the new instruction for using the alpa to set the boot id in
readme file. (CR9781)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Combined Boot
Operating System
Boot Code
Version
5.00a8
Size Driver
68KB
File Name
dc500a8.zip
Observations
Contains: x86 BootBIOS version 1.70a3 and OpenBoot version 1.41a4 This Combined Boot version 5.00a8 contains:
(1) x86 BootBIOS version 1.70a3
(2) OpenBoot version 1.41a4
For detailed information about x86 BootBIOS, please refer to section II below,
and for OpenBoot, section III. This Combined Boot can boot on either Intel
x86 Platform or Non-Intel Fcode. In other words, the platform is transparent
and the user should not be concerned with any differences with regard to x86
BootBIOS or OpenBoot.
Combined Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS and OpenBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\DC500A8.PRG Lp8000 Combined Boot
\CC500A8.PRG Lp9002 Combined Boot
Combined Boot Load Procedure
The Light Pulse Combined Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
2. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
3. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
EFIBoot
Operating System
Boot Code
Version
3.10a6
Size Driver
119KB
File Name
de310a6_ebc.zip
Observations
EFIBoot for IA64 platforms and x64 platforms that support EFIBoot. The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Images:
\readme.txt this file you are reading
\SE310A6.PRG Lp7000 EFIBoot version 3.10a6
\DE310A6.PRG Lp8000 EFIBoot version 3.10a6
\CE310A6.PRG Lp9000 EFIBoot version 3.10a6
\HE310A6.PRG Lp9802 EFIBoot version 3.10a6
\QE310A6.PRG Lp850 EFIBoot version 3.10a6
\RE310A6.PRG Lp950 EFIBoot version 3.10a6
\LE310A6.PRG Lp982 EFIBoot version 3.10a6
\TE310A6.PRG Lp10000 EFIBoot version 3.10a6
\ME310A6.PRG Lp1050 EFIBoot version 3.10a6
\EE310A6.PRG Lp101 EFIBoot version 3.10a6
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Firmware
Operating System
Firmware
Version
3.92a2
Size Driver
1.1MB
File Name
dd392a2.zip
Observations
Support Resources for Symmetrix and CLARiiON Compatibility:
This software kit supports the following PCI host adapters:
LP8000 LP8000DC
This kit includes the following files:
README.TXT The file you are reading
C322a0.TXT Combination Boot release notes
B170A1.TXT BootBIOS release notes
O141A2.TXT OpenBoot release notes
DDC392A2.DWC Firmware with Combination Boot
DDC392A2.AWC Firmware with loader and Combination Boot
DD392A2.DWC Firmware with no boot code
DD392A2.AWC Firmware with loader, no boot code
/prg_kit/*.* The individual SLI, boot, loader, and config files
which can be used to create the firmware above
DEV_ID.TXT Information on setting PCI ID values
DFPLUS1.CFL Configuration file to allow PCI ID = F801
FDEFAULT.CFL Configuration file to allow PCI ID = 1AE5
DDEFAULT.CFL Configuration file for restoring PCI ID to default
LP6DUTIL.EXE DOS-based HBA diagnostic utility 9.2a4
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.2a4
Changes and Corrections:
Added or refined features as per customer requests. (CR 8636, 8663,
9182, 8080, 8082, 9811, 9864, 10120, 10574)
Several symptoms, ranging from I/O errors to HBA hang, were caused by
the power management reset process and Solaris "Dynamic Reconfiguration"
process, both of which required a change in the HBA to assure that the
PCI configuration was ready within a very short time after HBA reset.
(CR 5204, 6941, 6961, 7097, 8634, 8635, 8637, 8638, 9398, 10212)
Enabled use of LP952 with Open Source Linux 2.01 and newer.
(CR 9362)
Corrected an incorrect response to an RRQ timeout. ABTS is now sent
if the RRQ to the host times out. (CR 10119, 9364)
When several commands were issued to the HBA and then one was aborted,
the firmware would occasionally not throw away all the frames for the
aborted exchange. The result was that the HBA would stop transmitting
R-RDY and no further credit would be issued. The rare instance in which
this could happen has been corrected. (CR 9393)
A rare condition where an incorrect IOCB could be returned to the host
if the exchange is aborted before the buffer list has been queued by the
host has been corrected. (CR 10117, 10058)
WWN upon receipt of a fiber login is now validated to avoid a problem
where the switch tries to access the HBA as a G-port,
(CR 10229, 10568, 10569)
FCP recovery has been improved by including the proper reason codes
for tapes. (CR 10173, 10575, 9530)
A switch login problem in point-to-point-only mode with certain
transceivers has been corrected. (CR 9406)
A CLOSE in point-to-point mode is no longer ignored. This corrects a
deadlock problem in OldPort mode when connecting to a switch.
(CR 9438)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Linux Offline Utility (requires driver version 8.0.16.44 or later)
Operating System
Linux
Version
1.0a14
Size Driver
2.8MB
File Name
linlpcfg-1.0a14.tgz
Observations
Please note: EMC qualifies operation of the hardware, drivers, firmware and Boot Bios for the products referenced, as documented in the current EMC ESM (EMC Support Matrix). Utility software, including HBAnyware and various stand alone utilities used to manage or maintain Emulex products, are not tested by EMC. Utility software is provided for the convenience of EMC customers. Emulex is responsible for the integrity, functionality and support.
WARNING: You are about to download the EMC Approved HBA driver. This driver is optimized for use with EMC "-E" HBAs. It is being made available to you to update your approved EMC HBAs to support your EMC and non-EMC hardware environments. Downloading this EMC approved driver for use with an unqualified or unsupported HBA may be inconsistent with applicable terms and conditions. If you have any questions about the suitability of downloading this driver, contact your Emulex or EMC sales team.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Linux Offline Utility (requires driver version 8.2.0.29 or later)
Operating System
Linux
Version
1.0a11
Size Driver
2.8MB
File Name
linlpcfg-1.0a11.tgz
Observations
Please note: EMC qualifies operation of the hardware, drivers, firmware and Boot Bios for the products referenced, as documented in the current EMC ESM (EMC Support Matrix). Utility software, including HBAnyware and various stand alone utilities used to manage or maintain Emulex products, are not tested by EMC. Utility software is provided for the convenience of EMC customers. Emulex is responsible for the integrity, functionality and support.
WARNING: You are about to download the EMC Approved HBA driver. This driver is optimized for use with EMC "-E" HBAs. It is being made available to you to update your approved EMC HBAs to support your EMC and non-EMC hardware environments. Downloading this EMC approved driver for use with an unqualified or unsupported HBA may be inconsistent with applicable terms and conditions. If you have any questions about the suitability of downloading this driver, contact your Emulex or EMC sales team.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.11a3
Size Driver
4.1MB
File Name
win.pdf
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
1.02a3
Size Driver
4.1MB
File Name
win.pdf
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Solaris 2-7-8-9-10
Operating System
Manual
Version
6.02hx2
Size Driver
2.5MB
File Name
sol602hx2.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting
Chapter 1 Introduction
Emulex/Solaris Environment ........................................................ 1-2
Planning Zoning in a Fabric Environment ........................... 1-2
Chapter 2 Installing and Configuring the HBA and Driver
Installing the Hardware .................................................................. 2-2
Installing the HBA.................................................................... 2-2
Installing the HBA I/O Driver....................................................... 2-3
Removing CLARiiON Failover Software.............................. 2-3
Installing a New Driver ........................................................... 2-3
Upgrading a 4.x SBus Driver to 5.x or higher....................... 2-6
Upgrading a 4.x PCI or 5.x Driver to 5.x or higher............ 2-10
Incorporating EMC Fibre Channel .............................................. 2-14
Fabric Environment Specifics................................................ 2-14
Editing lpfc.conf...................................................................... 2-16
Adding Target IDs and LUNS .............................................. 2-26
Editing /etc/system............................................................... 2-27
Target and LUN Blocking...................................................... 2-28
Partitioning and Labeling New Devices..................................... 2-30
Updating the HBA Firmware....................................................... 2-31
Updating the HBA FCode ............................................................ 2-32
Creating a Single-HBA Zone in a CLARiiON Environment ... 2-34
Creating a DS-xB or ED-12000B Switch Zone for Each HBA...
Replacing HBAs Connected to Shared CLARiiON Systems ... 2-36
Optimizing the HBA Driver in a CLARiiON Environment .... 2-37
FC4500, FC5300, and FC5700 Storage Systems: FC-AL .... 2-37
FC4500, FC4700, and CX-Series Storage Systems: FC-SW 2-38
C3400/3500 Storage Systems................................................ 2-39
Symmetrix/Fabric Case Study .................................................... 2-40
Chapter 3 Configuring a Boot Device on the Storage Array
Configuring a Symmetrix Boot Device......................................... 3-2
Requirements ............................................................................ 3-2
Procedure................................................................................... 3-2
Verifying Symmetrix Information ......................................... 3-3
Configuring Partitions ............................................................. 3-3
Creating Filesystems ................................................................ 3-4
Installing a Bootblk................................................................... 3-4
Copying Required Files ........................................................... 3-5
Modifying OpenBoot ............................................................... 3-7
Troubleshooting........................................................................ 3-9
Useful Monitor Commands .................................................. 3-10
Configuring a CLARiiON Boot Device ...................................... 3-11
Prerequisites ............................................................................ 3-11
Boot Disk Configuration........................................................ 3-11
Boot Setup................................................................................ 3-13
Troubleshooting Suggestions ............................................... 3-16
Helpful ok Prompt Commands............................................ 3-16
Booting From CLARiiON Over PowerPath ....................... 3-17
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Windows 2000
Operating System
Manual
Version
2.41a1
Size Driver
4.1MB
File Name
win.pdf
Observations
Microsoft WHQL Qualified for Windows 2000 Server
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver Manual
Information
VMware ESX
Operating System
Manual
Version
7.4.0.41
Size Driver
1MB
File Name
vmware.pdf
Observations
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
Driver for VMware User Manual, version 7.4.0.41 (1.03 MB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Solaris 2-7-8-9-10
Operating System
Manual
Version
6.01f
Size Driver
1.7MB
File Name
sol_601f.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit) Chapter 1 Introduction
Emulex/Solaris Environment ........................................................ 1-2
Planning Zoning in a Fabric Environment............................ 1-2
Chapter 2 Installing and Configuring the HBA and Driver
Installing the Hardware .................................................................. 2-2
Installing the HBA.................................................................... 2-2
Installing the HBA I/O Driver....................................................... 2-3
Removing CLARiiON Failover Software.............................. 2-3
Installing a New Driver ........................................................... 2-3
Upgrading a 4.x SBus Driver to 5.x or higher....................... 2-6
Upgrading a 4.x PCI or 5.x Driver to 5.x or higher............ 2-10
Incorporating EMC Fibre Channel .............................................. 2-14
Fabric Environment Specifics................................................ 2-14
Editing lpfc.conf...................................................................... 2-16
Adding Target IDs and LUNS............................................... 2-26
Target and LUN Blocking...................................................... 2-27
Editing /etc/system............................................................... 2-28
Partitioning and Labeling New Devices..................................... 2-30
Updating the HBA Firmware....................................................... 2-31
Updating the HBA FCode ............................................................ 2-32
Creating a Single-HBA Zone in a CLARiiON Environment ... 2-34
Creating a DS-xB or ED-12000B Switch Zone for
Each HBA................................................................................. 2-34
Replacing HBAs Connected to Shared CLARiiON Systems ... 2-36
Optimizing the HBA Driver in a CLARiiON Environment .... 2-37
FC4500, FC5300, and FC5700 Storage Systems: FC-AL .... 2-37
FC4500, FC4700, and CX-Series Storage Systems: FC-SW 2-38
C3400/3500 Storage Systems................................................ 2-39
Symmetrix/Fabric Case Study .................................................... 2-40
Chapter 3 Configuring a Boot Device on the Storage Array
Configuring a Symmetrix Boot Device......................................... 3-2
Requirements ............................................................................ 3-2
Procedure................................................................................... 3-2
Verifying Symmetrix Information.......................................... 3-3
Configuring Partitions ............................................................. 3-3
Creating Filesystems ................................................................ 3-4
Installing a Bootblk................................................................... 3-4
Copying Required Files ........................................................... 3-5
Modifying OpenBoot ............................................................... 3-6
Troubleshooting ........................................................................ 3-9
Useful Monitor Commands .................................................. 3-10
Configuring a CLARiiON Boot Device ...................................... 3-11
Prerequisites ............................................................................ 3-11
Boot Disk Configuration........................................................ 3-11
Boot Setup................................................................................ 3-13
Troubleshooting Suggestions................................................ 3-16
Helpful ok Prompt Commands............................................ 3-16
Booting From CLARiiON Over PowerPath ....................... 3-17
This chapter describes the procedures for installing and configuring
the Emulex HBA and driver.
? Installing the Hardware ....................................................................2-2
? Installing the HBA I/O Driver.........................................................2-3
? Incorporating EMC Fibre Channel ................................................2-14
? Partitioning and Labeling New Devices.......................................2-30
? Updating the HBA Firmware.........................................................2-31
? Updating the HBA FCode ..............................................................2-32
? Creating a Single-HBA Zone in a CLARiiON Environment .....2-34
? Replacing HBAs Connected to Shared CLARiiON Systems .....2-36
? Optimizing the HBA Driver in a CLARiiON Environment ......2-37
? Symmetrix/Fabric Case Study.......................................................2-40
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Offline Utility Manual
Information
Manual
Operating System
Manual
Size Driver
491KB
File Name
manual.pdf
Observations
EMC qualifies operation of the hardware, drivers, firmware and Boot Bios for the products referenced, as documented in the current EMC ESM (EMC Support Matrix). Utility software, including HBAnyware and various stand alone utilities used to manage or maintain Emulex products, are not tested by EMC. Utility software is provided for the convenience of EMC customers. Emulex is responsible for the integrity, functionality and support.
WARNING: You are about to download the EMC Approved HBA driver. This driver is optimized for use with EMC "-E" HBAs. It is being made available to you to update your approved EMC HBAs to support your EMC and non-EMC hardware environments. Downloading this EMC approved driver for use with an unqualified or unsupported HBA may be inconsistent with applicable terms and conditions. If you have any questions about the suitability of downloading this driver, contact your Emulex or EMC sales team.
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.20a3
Size Driver
3.7MB
File Name
manual.pdf
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
HBAnyware User Manual
Information
VMware ESX
Operating System
Manual
Version
7.4.0.41
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
HBAnyware Command Line User Manual
Information
VMware ESX
Operating System
Manual
Version
8.2.0.30.52
Size Driver
888KB
File Name
manual.pdf
Observations
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware Command Line Version 4.0 (812 KB pdf file)
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver Manual
Information
VMware ESX
Operating System
Manual
Version
8.2.0.30.52
Size Driver
1.4MB
File Name
vmware.pdf
Observations
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
Driver for VMware User Manual, version 8.2.0.30.52vmw
Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Solaris 2-7-8-9-10
Operating System
Manual
Version
5.02c
Size Driver
549KB
File Name
sol_502b.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting (549 KB) Chapter 1 Introduction
Emulex/Solaris Environment ........................................................ 1-2
Planning Zoning in a Fabric Environment............................ 1-2
Chapter 2 Installing and Configuring the HBA and Driver
Installing the Hardware .................................................................. 2-2
Installing Optical GBICs for CLARiiON............................... 2-2
Installing the HBA.................................................................... 2-3
Connecting Cables in a CLARiiON Environment ............... 2-4
Installing the HBA I/O Driver....................................................... 2-5
Removing CLARiiON Failover Software.............................. 2-5
Installing a New Driver ........................................................... 2-5
Upgrading a 4.x SBus Driver to 5.x........................................ 2-8
Upgrading a 4.x PCI or 5.x Driver to 5.x ............................. 2-12
Incorporating EMC Fibre Channel.............................................. 2-16
Fabric Environment Specifics................................................ 2-16
Editing lpfc.conf...................................................................... 2-19
Adding LUNS ......................................................................... 2-26
Editing /etc/system............................................................... 2-29
Partitioning and Labeling New Devices..................................... 2-31
Updating the HBA Firmware....................................................... 2-32
Updating the HBA FCode ............................................................ 2-33
Creating a Single-HBA Zone in a CLARiiON Environment ... 2-35
Creating a DS-xB or ED-12000B Switch Zone for Each
HBA .......................................................................................... 2-35
Replacing HBAs Connected to Shared CLARiiON Systems... 2-37
Optimizing the HBA Driver in a CLARiiON Environment .... 2-38
FC4500, FC5300, and FC5700 Storage Systems: FC-AL .... 2-38
FC4500, FC4700, and CX-Series Storage Systems: FC-SW 2-39
C3400/3500 Storage Systems................................................ 2-40
Symmetrix/Fabric Case Study .................................................... 2-41
Chapter 3 Configuring a Boot Device on the Storage Array
Configuring a Symmetrix Boot Device......................................... 3-2
Requirements ............................................................................ 3-2
Procedure................................................................................... 3-2
Verifying Symmetrix Information.......................................... 3-3
Configuring Partitions ............................................................. 3-3
Creating Filesystems ................................................................ 3-4
Installing a Bootblk................................................................... 3-4
Copying Required Files ........................................................... 3-5
Modifying OpenBoot ............................................................... 3-6
Troubleshooting ........................................................................ 3-9
Useful Monitor Commands .................................................. 3-10
Configuring a CLARiiON Boot Device ...................................... 3-11
Prerequisites ............................................................................ 3-11
Boot Disk Configuration........................................................ 3-11
Boot Setup................................................................................ 3-13
Troubleshooting Suggestions................................................ 3-16
Helpful ok Prompt Commands ............................................ 3-16
Booting From CLARiiON Over PowerPath ....................... 3-17
This chapter describes the procedures for installing and configuring
the Emulex HBA and driver.
? Installing the Hardware ....................................................................2-2
? Installing the HBA I/O Driver.........................................................2-5
? Incorporating EMC Fibre Channel ................................................2-16
? Partitioning and Labeling New Devices.......................................2-31
? Updating the HBA Firmware.........................................................2-32
? Updating the HBA FCode ..............................................................2-33
? Creating a Single-HBA Zone in a CLARiiON Environment .....2-35
? Replacing HBAs Connected to Shared CLARiiON Systems .....2-37
? Optimizing the HBA Driver in a CLARiiON Environment ......2-38
? Symmetrix/Fabric Case Study.......................................................2-41
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Manual
Information
Solaris 2-7-8-9-10
Operating System
Manual
Version
6.02f
Size Driver
1.7MB
File Name
sol_602e.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Introduction
Emulex/Solaris Environment ........................................................ 1-2
Planning Zoning in a Fabric Environment............................ 1-2
Chapter 2 Installing and Configuring the HBA and Driver
Installing the Hardware .................................................................. 2-2
Installing the HBA.................................................................... 2-2
Installing the HBA I/O Driver....................................................... 2-3
Removing CLARiiON Failover Software.............................. 2-3
Installing a New Driver ........................................................... 2-3
Upgrading a 4.x SBus Driver to 5.x or higher....................... 2-6
Upgrading a 4.x PCI or 5.x Driver to 5.x or higher............ 2-10
Incorporating EMC Fibre Channel .............................................. 2-14
Fabric Environment Specifics................................................ 2-14
Editing lpfc.conf...................................................................... 2-16
Adding Target IDs and LUNS............................................... 2-25
Editing /etc/system............................................................... 2-27
Target and LUN Blocking...................................................... 2-28
Partitioning and Labeling New Devices..................................... 2-29
Updating the HBA Firmware....................................................... 2-30
Updating the HBA FCode ............................................................ 2-31
Creating a Single-HBA Zone in a CLARiiON Environment ... 2-33
Creating a DS-xB or ED-12000B Switch Zone for
Each HBA................................................................................. 2-33
Replacing HBAs Connected to Shared CLARiiON Systems ... 2-35
Optimizing the HBA Driver in a CLARiiON Environment .... 2-36
FC4500, FC5300, and FC5700 Storage Systems: FC-AL .... 2-36
FC4500, FC4700, and CX-Series Storage Systems: FC-SW 2-37
C3400/3500 Storage Systems................................................ 2-38
Symmetrix/Fabric Case Study .................................................... 2-39
Chapter 3 Configuring a Boot Device on the Storage Array
Configuring a Symmetrix Boot Device......................................... 3-2
Requirements ............................................................................ 3-2
Procedure................................................................................... 3-2
Verifying Symmetrix Information.......................................... 3-3
Configuring Partitions ............................................................. 3-3
Creating Filesystems ................................................................ 3-4
Installing a Bootblk................................................................... 3-4
Copying Required Files ........................................................... 3-5
Modifying OpenBoot ............................................................... 3-6
Troubleshooting ........................................................................ 3-9
Useful Monitor Commands .................................................. 3-10
Configuring a CLARiiON Boot Device ...................................... 3-11
Prerequisites ............................................................................ 3-11
Boot Disk Configuration........................................................ 3-11
Boot Setup................................................................................ 3-13
Troubleshooting Suggestions................................................ 3-16
Helpful ok Prompt Commands............................................ 3-16
Booting From CLARiiON Over PowerPath ....................... 3-17
This chapter describes the procedures for installing and configuring
the Emulex HBA and driver.
? Installing the Hardware ....................................................................2-2
? Installing the HBA I/O Driver.........................................................2-3
? Incorporating EMC Fibre Channel ................................................2-14
? Partitioning and Labeling New Devices.......................................2-29
? Updating the HBA Firmware.........................................................2-30
? Updating the HBA FCode ..............................................................2-31
? Creating a Single-HBA Zone in a CLARiiON Environment .....2-33
? Replacing HBAs Connected to Shared CLARiiON Systems .....2-35
? Optimizing the HBA Driver in a CLARiiON Environment ......2-36
? Symmetrix/Fabric Case Study.......................................................2-39
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
DOS Offline Utility
Operating System
MS-DOS
Version
2.0a5
Size Driver
100KB
File Name
doslpcfg_2.0a6.zip
Observations
Please note: EMC qualifies operation of the hardware, drivers, firmware and Boot Bios for the products referenced, as documented in the current EMC ESM (EMC Support Matrix). Utility software, including HBAnyware and various stand alone utilities used to manage or maintain Emulex products, are not tested by EMC. Utility software is provided for the convenience of EMC customers. Emulex is responsible for the integrity, functionality and support.
WARNING: You are about to download the EMC Approved HBA driver. This driver is optimized for use with EMC "-E" HBAs. It is being made available to you to update your approved EMC HBAs to support your EMC and non-EMC hardware environments. Downloading this EMC approved driver for use with an unqualified or unsupported HBA may be inconsistent with applicable terms and conditions. If you have any questions about the suitability of downloading this driver, contact your Emulex or EMC sales team.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver Kit
Operating System
Solaris 2-7-8-9-10
Version
6.01f
Size Driver
8.3MB
File Name
solaris-6.01f-p3-1c.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.0a16, HBAnyware Security Configurator 2.0a16 and lputil 1.6a8
This kit contains the following components:
lpfc-6.01f-p3-sparc.tar - Emulex Fibre Channel Solaris Driver
EmlxApps300a9-Solaris.tar - Emulex Applications kit
readme.first.txt - this file
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/solframe.htm.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a9-Solaris.tar package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver Kit
Operating System
Solaris 2-7-8-9-10
Version
6.02f
Size Driver
12MB
File Name
solaris-2.1a18-6.02f-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
This kit contains the following components:
lpfc-6.02f-sparc.tar - Emulex Fibre Channel Solaris Driver
EmlxApps300a39-Solaris.tar - Emulex Applications kit
readme.first.txt - this file
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/solframe.htm.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a39-Solaris.tar package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver Kit
Operating System
Solaris 2-7-8-9-10
Version
5.02c
Size Driver
4.6MB
File Name
solaris-5.02c-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility xxx, HBAnyware Security Configurator xxx and lputil 1.5a0
This kit contains the following components:
lpfc-5.02c-sparc.tar - Emulex Fibre Channel Solaris Driver
EmlxApps100a08.tar - Emulex Applications kit
Readme.first.txt - this file
Please note that the file named HBANYWARE.EXE that is included in the
hbanyware-sparc kit will be renamed prior to the final production release.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under the drivers/Solaris section.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.txt file contained in the
EmlxApps100a08.tar package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver Kit
Operating System
Solaris 2-7-8-9-10
Version
6.02hx2
Size Driver
12MB
File Name
solaris-2.1a18-6.02hx2-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18 and lputil 2.0a9
HBAnyware 2.1a18 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.02c, or later
hbaapi 2.0e
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
readme.txt
Operating System
Solaris 2-7-8-9-10
Version
5.02c
Size Driver
36KB
File Name
solrm502c.txt
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
read me text file (36 KB) This Document is divided into the following sections:
I. CD-ROM CONTENTS
II. FIRMWARE RELATED INFOS AND ISSUES
III. OPEN BOOT PROM (FCODE) RELATED INFOS AND ISSUES
IV. DEVICE DRIVER ISSUES AND ISSUES
1. CONFIGURATION VARIABLES
2. SUPPORTED ENVIRONMENT
3. SPECIAL CONDITIONS AND INFORMATION
4. CHANGES/CORRECTIONS SINCE PRIOR RELEASES
V. NEW FUNCTIONALITIES
**********************************************************************
I. CD-ROM CONTENTS
***************
1. The HBA driver and application kit Solaris-5.02c-1a.tar.Z for the
Arbitrated Loop and the Fabric Switch configurations.
2. The Emulex HBA's Firmwares.
3. The Emulex HBA's Fcodes.
4. The release notes (this file: release.txt)
5. Emulex_Solaris.pdf file
Installation and instructions of the Emulex HBA's and Symmetrix/Clariion
in the Sun Solaris Sparc environment.
II. FIRMWARE RELATED INFO AND ISSUES
********************************
Current requirement for the Emulex HBA's firmware revisions:
LP8000-EMC is 3.91a3 (file: dd391a3.awc)
LP9002-E is 3.91a3 (file: cd391a3.awc)
LP9002C-E is 3.91a3 (file: cd391a3.awc)
LP9002DC-E is 3.91a3 (file: cd391a3.awc)
LP9802-E is 1.01a2 (file: hd101a2.all)
LP9002S-E is 3.91a3 (file: rf391a3.awc)
LP10000-E is 1.80a2 (file: td180a2.all)
LP10000DC-E is 1.80a2 (file: td180a2.all)
The information of the firmware upgrading is available in the document
file Emulex_Solaris.pdf, section "Updating the HBA Firmware".
Issues/Features that is related to Symmetrix/Clariion:
- support SNIA ioctl functions.
- provides a workaround for potential invalid data to be returned to the host.
Please refer to the Emulex product advisory dated: Oct 4,2000 or later.
- support Tachyon XL-2 target devices.
For further detail information on the fixes please contact Software
Assistance Center.
III. OPEN BOOT PROM (FCODE) RELATED INFOS AND ISSUES
***********************************************
Current requirement for the Fcode:
LP8000-EMC is 1.40a0 (file: DO140A0.PRG)
LP9002-E is 1.40a0 (file: CO140A0.PRG)
LP9002C-E is 1.40a0 (file: CO140A0.PRG)
LP9002DC-E is 1.40a0 (file: CO140A0.PRG)
LP9802-E is 1.40a0 (file: HO140A0.PRG)
LP9002S-E is 2.40a0 (file: TSC240A0.PRG)
LP10000-E is 1.40a0 (file: TO140A0.PRG)
LP10000DC-E is 1.40a0 (file: TO140A0.PRG)
The information of the Fcode installation/upgrading is available in the
document file Emulex_Solaris.pdf, section "Updating the HBA Fcode".
Issues/Features that is related to Symmetrix/Clariion:
- support Direct Connect (Arbitrated Loop) and Switch Environment
- support probe-scsi-all
- support booting for Solaris 7 and above.
- The Emulex Fcode is not supported for Sun PCI expansion Netra E1.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
readme.txt
Operating System
Solaris 2-7-8-9-10
Version
6.01f
Size Driver
15KB
File Name
readme.txt
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Emulex Solaris release Information
Emulex Corporation
Solaris Release 6.01f-p3 01/28/05
Changes for Solaris 6.01f-p3
---------------------------------------------------------------
CR 14843 Fixed - Solaris 6.01f-p2 pkgadd/pkgrm do not work correctly
CR 14845 Fixed - Solaris 6.01f-p2 pkgadd fails on Solaris 2.6
Changes for Solaris 6.01f-p2
---------------------------------------------------------------
CR 14672 Fixed - Solaris 6.01f Package installs to non-root are not handled correctly
Changes for Solaris 6.01f
---------------------------------------------------------------
CR 13593 Fixed - Solaris 6.01d device attach failure during boot phase
CR 11665 Removed this fix (from 6.01a) as some failover software improperly
handles the new error code
Changes for Solaris 6.01e
---------------------------------------------------------------
CR 12659 Fixed - Solaris 6.01c driver hangs when scsi layer sends I/O in polled mode
CR 13594 Fixed - Solaris 6.01c driver fails I/O when HBA receives RSCN
CR 13595 Fixed - Solaris 6.01c driver takes exceptionally long to complete I/O
CR 13597 Fixed - Solaris 6.01c - No update script to migrate lpfc.conf from 5.x to 6.x
Changes for Solaris 6.01d
---------------------------------------------------------------
CR 13094 Fixed - Solaris 6.00g driver panics if PRLO is received
CR 13149 Fixed - Solaris 6.01c driver fails I/O prematurely causing failover software
to fail when no-device-delay is set to zero
Changes for Solaris 6.01c
---------------------------------------------------------------
CR 12511 Fixed - Solaris 6.01a driver panics when attempting to modunload driver
Changes for Solaris 6.01b
---------------------------------------------------------------
CR 11888 Fixed - Solaris 6.00g driver does not load on Solaris 10 Beta
CR 11920 Fixed - Solaris 6.00g driver panics with array of 255 Luns when target mapping
HBA API ioctl is called
CR 12413 Fixed - Solaris 6.00g driver panics while scanning for devices in a
failover environment
CR 12421 Fixed - dfc 'fcpmap' command does not work on an array with 255 luns
Changes for Solaris 6.01a
---------------------------------------------------------------
CR 11596 Fixed - NFS communication halts unexpectedly, system eventually
hangs with Solaris 6.00g driver
CR 11607 Fixed - System panics when attempting snoop analysis on non-responding
network node with Solaris 6.00g driver
CR 11646 Fixed - Memory leak running Link initialization ioctl when link is down
CR 11665 Fixed - Solaris 6.00g driver does not recover properly on cable pull of
tape target
CR 11667 Fixed - Solaris 6.00g driver unable to ping certain switches
CR 11744 Fixed - GetDiscoveredPortAttributes HBA API function does not report stale
data properly
CR 11799 Fixed - Shorten initial bringup time on a port that is connected to a loopback
connector
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
readme.txt
Operating System
Solaris 2-7-8-9-10
Version
6.02f
Size Driver
18KB
File Name
solrm602f.txt
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
read me text file (18 KB) This Document is divided into the following sections:
I. CD-ROM CONTENTS
II. FIRMWARE RELATED INFOS AND ISSUES
III. OPEN BOOT PROM (FCODE) RELATED INFOS AND ISSUES
IV. DEVICE DRIVER INFORMATION AND ISSUES
1. CONFIGURATION VARIABLES
2. SUPPORTED ENVIRONMENT
3. SPECIAL CONDITIONS AND INFORMATION
4. CHANGES/CORRECTIONS SINCE PRIOR RELEASES
5. NEW FUNCTIONALITIES
**********************************************************************
I. CD-ROM CONTENTS
***************
1. The HBA driver and application kit Solaris-6.01f-p3-1c.tar for the
Arbitrated Loop and Fabric Switch configurations.
2. The Emulex HBA's Firmwares.
3. The Emulex HBA's Fcodes.
4. The release notes (this file: release.txt)
5. Emulex_Solaris.pdf file
Installation and instructions of the Emulex HBA's and Symmetrix/Clariion
in the Sun Solaris Sparc environment.
II. FIRMWARE RELATED INFO AND ISSUES
********************************
Current requirement for the Emulex HBA's firmware revisions:
LP8000-EMC is 3.92a2 (file: dd392a2.awc)
LP9002-E is 3.92a3 (file: cd392a3.awc)
LP9002C-E is 3.92a3 (file: cd392a3.awc)
LP9002DC-E is 3.92a3 (file: cd392a3.awc)
LP9002S-E is 3.92a3 (file: rf392a3.awc)
LP9802-E is 1.91a1 (file: hd191a1.all)
LP10000-E is 1.91a1 (file: td191a1.all)
LP10000DC-E is 1.91a1 (file: td191a1.all)
The information of the firmware upgrading is available in the document
file Emulex_Solaris.pdf, section "Updating the HBA Firmware".
Issues/Features that is related to Symmetrix/Clariion:
- support SNIA ioctl functions.
- provides a workaround for potential invalid data to be returned to the host.
Please refer to the Emulex product advisory dated: Oct 4,2000 or later.
- support Tachyon XL-2 target devices.
For further detail information on the fixes please contact Software
Assistance Center.
III. OPEN BOOT PROM (FCODE) RELATED INFOS AND ISSUES
***********************************************
Current requirement for the Fcode revision:
LP8000-EMC is 1.41a4 (file: DO141A4.PRG)
LP9002-E is 1.50a4 (file: CO150A4.PRG)
LP9002C-E is 1.50a4 (file: CO150A4.PRG)
LP9002DC-E is 1.50a4 (file: CO150A4.PRG)
LP9802-E is 1.50a4 (file: HO150A4.PRG)
LP9002S-E is 2.41a5 (file: TSC241A5.PRG)
LP10000-E is 1.50a4 (file: TO150A4.PRG)
LP10000DC-E is 1.50a4 (file: TO150A4.PRG)
Information of the Fcode installation/upgrading is available in the
document file Emulex_Solaris.pdf, section "Updating the HBA Fcode".
Issues/Features that is related to Symmetrix/Clariion:
- support Direct Connect (Arbitrated Loop) and Switch Environment
- support probe-scsi-all
- support booting for Solaris 7 and above.
- The Emulex Fcode is not supported for Sun PCI expansion Netra E1.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Applications Kit
Operating System
VMware ESX
Version
7.4.0.41
Size Driver
931KB
File Name
elxvmwarecorekit-esx35-4.0a45-1.i386.rpm
Observations
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
HBAnyware 4.0a45 agent, hbacmd, HP Rubah library version 9.0 (932 KB rpm file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Applications Kit
Operating System
VMware ESX
Version
8.2.0.30.52
Size Driver
2MB
File Name
elxvmwarecorekit-esx40-4.0a44-1.x86_64.rpm
Observations
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware 4.0a44 agent, hbacmd, HP Rubah library version 9.0 (2.02 MB rpm file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2000
Version
2.41a1
Size Driver
13.8MB
File Name
emcfcportkit_2-41a1-1b.exe
Observations
Microsoft WHQL Qualified for Windows 2000 Server
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2000
Version
2.42a0
Size Driver
13.8MB
File Name
emcfcportkit_2-42a0-1c.exe
Observations
Microsoft WHQL Qualified for Windows 2000 Server
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
15MB
File Name
storportminiportkit_1-11a0-1c.exe
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and lputilnt version 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2000-2003
Version
2.40a3
Size Driver
13.8MB
File Name
emcfcportkit_2-40a3-1b.exe
Observations
Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver 64-bit
Operating System
Windows 2000-2003
Version
1.02a3
Size Driver
6.7MB
File Name
storport-6-1.02a3-2b.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.0a13 and lputil64 version 1.7a16
This kit contains the following components:
elxstorinstall6102a3dc.zip - Emulex Fibre Channel StorPort Miniport Driver
Emlx64Apps300a5.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the elxstorinstall6102a3dc.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
Emlx64Apps300a5.zip package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Legacy Install Kit IA64
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
12.9MB
File Name
storport-6-1.11a0-1c.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17
This kit contains the following components:
elxstorinstall6111a0dc.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver 32-bit
Operating System
Windows 2000-2003
Version
1.02a3
Size Driver
5.6MB
File Name
storport-5-1.02a3-1b.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.0a13 and lputil64 version 1.7a16
This kit contains the following components:
elxstorinstall5102a3c.zip - Emulex Fibre Channel StorPort Miniport Driver
EmlxApps300a5.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the elxstorinstall5102a3c.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
EmlxApps300a5.zip package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Legacy Install Kit x86
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
12.6MB
File Name
storport-5-1.11a0-1e.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17
This kit contains the following components:
elxstorinstall5111a0c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Legacy Install Kit x64
Operating System
Windows 2000-2003
Version
1.11a0 x86, IA64 and x64
Size Driver
12.6MB
File Name
storport-7-1.11a0-1e.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17
This kit contains the following components:
elxstorinstall7111a0c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
Driver
Operating System
Windows 2000-2003
Version
1.03a9 x86, IA64 and x64
Size Driver
11.2MB
File Name
storport-5-1.03a9-1d.zip
Observations
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a9 and lputilnt version 1.8a2
This kit contains the following components:
elxstorinstall5103a9dc.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a9-1b.zip - Emulex Applications Kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.11a3
Size Driver
15.1MB
File Name
storportminiportkit_1-11a3-1b.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 2.1a21 and lputilnt version 1.8a18 (15.5 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.20a3
Size Driver
19MB
File Name
storportminiportkit_1-20a3-1h.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 3.0 (19.5 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.30a6
Size Driver
24MB
File Name
emcstorportminiportkit_1-30a6-1b.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a18 (24.6 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for EMC
Model
Emulex LP8000-EMC
Description
AutoPilot Install Kit
Operating System
Windows 2003
Version
1.30a9
Size Driver
24.2MB
File Name
emcstorportminiportkit_1-30a9-1e.exe
Observations
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix KB943545 is required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a18 (24.6 MB exe file)
Access to Official Website Emulex
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.