Available 2 files for Micronet SP128A
Select Files
Company
Micronet
Categories
Networks Cards
Model
Micronet SP128A
Description
Drivers
Operating System
Windows 98-2000
Size Driver
16KB
File Name
sp128awin.zip
Observations
Contents:
System Requirements
Hardware Installation
Software Installation
----------------------------
System Requirements
----------------------------
One of the following operating systems is required:
Windows Me
Windows 2000
Windows 98 or Windows 98 Second Edition
----------------------
Hardware Installation
----------------------
The Fast Ethernet USB Adapter comes with a USB cable. One end of the cable
has a rectangular plug, which is called an A-type connector. The other
end of the cable has a square plug, or B-type connector.
The adapter has two ports. One is for Twisted Pair cabling -- it
looks like an over-sized phone jack. The other port looks like a
square hole -- this is the USB B-type port.
1. Make sure your PC is powered on and that you are at the Windows 98
desktop.
2. Insert the cable's square B-type plug into the adapter's B-type
port.
3. Insert the other end of the USB cable (the A-type connector) into
the USB port on your PC. The adapter is now connected to your PC.
4. Connect your adapter to a 10Mbps or 10/100Mbps Ethernet adapter or
10/10Mbps Ethernet hub/switch using RJ-45 Twisted Pair cabling.
The RJ-45 jacks should fit into the RJ-45 port on both of the adapter
and hub/switch.
----------------------
Software Installation
----------------------
Driver installation procedures vary for each operating system.
The following operating systems are supported:
Windows Me
Windows 2000
Windows 98
Windows Me
-----------
Follow the procedures below to install the 10/100Mbps Fast Ethernet USB
Adapter's driver:
1. Windows will automatically detect the 10/100Mbps Fast Ethernet USB
Adapter when it is connected to your computer.
2. The Add New Hardware Wizard will indicate that it has found
"10/100 Fast Ethernet". Click Next to continue.
3. Insert the 10/100Mbps Fast Ethernet USB Adapter driver disc into
your Floppy disk drive.
4. Select Specify the location of the driver (Advanced) and click Next.
5. Select Specify a Location and type or browse to the "A:\",
and then click Next. If prompted for additional Windows files,
insert your Windows 98 CD-ROM and click Next.
6. Click Finish.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP128A
Description
Drivers
Operating System
Windows XP
Size Driver
379KB
File Name
sp128a_xp.zip
Observations
Contents:
System Requirements
Hardware Installation
Software Installation
----------------------------
System Requirements
----------------------------
One of the following operating systems is required:
Windows Me
Windows 2000
Windows 98 or Windows 98 Second Edition
----------------------
Hardware Installation
----------------------
The Fast Ethernet USB Adapter comes with a USB cable. One end of the cable
has a rectangular plug, which is called an A-type connector. The other
end of the cable has a square plug, or B-type connector.
The adapter has two ports. One is for Twisted Pair cabling -- it
looks like an over-sized phone jack. The other port looks like a
square hole -- this is the USB B-type port.
1. Make sure your PC is powered on and that you are at the Windows 98
desktop.
2. Insert the cable's square B-type plug into the adapter's B-type
port.
3. Insert the other end of the USB cable (the A-type connector) into
the USB port on your PC. The adapter is now connected to your PC.
4. Connect your adapter to a 10Mbps or 10/100Mbps Ethernet adapter or
10/10Mbps Ethernet hub/switch using RJ-45 Twisted Pair cabling.
The RJ-45 jacks should fit into the RJ-45 port on both of the adapter
and hub/switch.
----------------------
Software Installation
----------------------
Driver installation procedures vary for each operating system.
The following operating systems are supported:
Windows Me
Windows 2000
Windows 98
Windows Me
-----------
Follow the procedures below to install the 10/100Mbps Fast Ethernet USB
Adapter's driver:
1. Windows will automatically detect the 10/100Mbps Fast Ethernet USB
Adapter when it is connected to your computer.
2. The Add New Hardware Wizard will indicate that it has found
"10/100 Fast Ethernet". Click Next to continue.
3. Insert the 10/100Mbps Fast Ethernet USB Adapter driver disc into
your Floppy disk drive.
4. Select Specify the location of the driver (Advanced) and click Next.
5. Select Specify a Location and type or browse to the "A:\",
and then click Next. If prompted for additional Windows files,
insert your Windows Me CD-ROM and click Next.
6. Click Finish.
Access to Official Website Micronet
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.