Available 3 files for Micronet SP905
Select Files
Company
Micronet
Categories
Networks Cards
Model
Micronet SP905
Description
Drivers
Operating System
MS-Dos
Size Driver
17KB
File Name
sp905_dos_driver.zip
Observations
PCMCIA Ethernet Adapter Packet Driver
Installation for FTP PC/TCP
FILE: Readme.txt
Last Updated: 21-Feb-2001
Contents
--------
- Introduction
- Getting Started
- Troubleshooting
- Copyrights and Trademarks
Introduction
------------
To help your friendly installation, you can check it from the
REAMDE.TXT files.
Getting Started
---------------
wlan11.COM assist your ease of starting a FTP connection under
network operation system,which confirms FTP's PC/TCP Packet driver
Specification.
The First Step:
Copy wlan11.COM to your proper driver diskette.
The Second Step:
Type cw10on
(ie. C:\cw10on 3e0 0 11 280
The Third Step:
Run wlan11.COM program in the root of the driver diskette.
The Install Method:
wlan11
Packet Driver Parameters:
the packet driver program, which can be from
0x60--0x66,0x68--0x6f.
Note:
number.
hex - start with '0x'.
ex. >wlan11 0x60
dec - start with nonzero digit.
ex. >wlan11 96
which can be from 3 to 15.
Note:
[-option]:
-r -- Data rate for message transmission
1:1Mb,2:2Mb,3:Auto 1/2,4:5.5Mb,8:11Mb,15:Full Auto;Default:2
-e -- Config Service Set identificaton(SSID) for connection.
-c -- Set communication channel number for BSS creation
Range:1..14;Default:3
-m -- Set net connection control characteristics
1:InfraStructure,3:Ad-hoc;Default:1
-l -- Set frame length used for RTS/CTS handshake control
Range:0..3000;Default:2432
-f -- Set fragment length for unicast message transmission
Range:256..2346;Default:2346
Company
Micronet
Categories
Networks Cards
Model
Micronet SP905
Description
Drivers
Operating System
Windows CE
Size Driver
1.6MB
File Name
sp905_ce_driver_and_manual.zip
Observations
This chapter describes the instructions that guide you through the proper hardware installation of your 11Mbps Wireless LAN CF Card for Pocket PC 2002 and Windows CE 3.0 operating system.
2-1 System Requirements
In order to use the 11Mbps Wireless LAN CF Card, your computer must be equipped with the following:
Pocket PC (PPC) Handheld PC (HPC)
? Compaq: IPAQ (CPU: Strong ARM) ¦ Sharp: Telios (MIPS R3000)
? HP: Jonada 525 and 548 (CPU: SH3) ¦ HP: Jornada 720 (Strong ARM)
? Casio: All models (MIPS R4000) ¦ Intel: Pentium/X86 CPU
.....
More to come, check with supplier’s website.
2-2 Before Getting Started
Before installing the driver and utility of the Wireless LAN CF Card for the Pocket PC/Handheld PC, you need to first establish a connection between host PC and PDA device with Microsoft Active Sync. Instructions are as follows:
Step 1: Install the Microsoft Active Sync program that came with your PDA Product CD. Follow the on-screen instructions to install the Active Sync on the host computer.
Step 2: Upon completion of installation, establish an ActiveSync connection between the host computer and the Pocket PC using a serial cable, a USB cable, or an infrared link. (Refer to your Pocket PC manual for instructions. A “Get Connected “ message will pop-up. Click Next to proceed.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP905
Description
Drivers
Operating System
Windows XP
Size Driver
2.4MB
File Name
sp905_fw_dr_ut_for_xp.zip
Access to Official Website Micronet
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.