Available 21 files for Chem Usa ChemBook 2700
Select Files
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Suspend to Disk Partition Utility
Size Driver
41KB
File Name
2700s2d.exe
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
BIOS Updates
Version
R1.13
Size Driver
184KB
File Name
27r113.exe
Observations
Recommended Flash EPROM (BIOS) Management & Updating Procedures
===================================================
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from
the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.
2. Copy the extracted files to your new diskette.
3. Set SW1-1 and SW1-2 to On under the keyboard.
4. At the "A:\" prompt, type: [1100M] or [fp /m=110m 11mr127.bin] and then the
WARNING: If the Flash Memory Writer utility was not able to successfully
download a complete BIOS file, your system may not be able to boot up.
If this happens, your system will need service from your vendor.
5. Turn off your computer after successfully flashing the new BIOS.
6. Turn on your computer and hold down the key to enter BIOS setup.
You must select "Setup Default" to affect the new BIOS, then you may
set other items from the Menu.
7. Be sure to enable Plug and Play OS support if you are running Windows 95.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
BIOS Updates
Operating System
BIOS Updates
Version
R1.13
Size Driver
184KB
File Name
27r113.exe
Observations
Recommended Flash EPROM (BIOS) Management & Updating Procedures
===================================================
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from
the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.
2. Copy the extracted files to your new diskette.
3. Set SW1-1 and SW1-2 to On under the keyboard.
4. At the "A:\" prompt, type: [1100M] or [fp /m=110m 11mr127.bin] and then the
WARNING: If the Flash Memory Writer utility was not able to successfully
download a complete BIOS file, your system may not be able to boot up.
If this happens, your system will need service from your vendor.
5. Turn off your computer after successfully flashing the new BIOS.
6. Turn on your computer and hold down the key to enter BIOS setup.
You must select "Setup Default" to affect the new BIOS, then you may
set other items from the Menu.
7. Be sure to enable Plug and Play OS support if you are running Windows 95.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
MS-DOS
Size Driver
727KB
File Name
9385dos.exe
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Audio Drivers - Yamaha Audio OPL-SAx
Operating System
MS-DOS
Version
v.1.00
Size Driver
1022KB
File Name
opl3dos.exe
Observations
Yamaha OPL3 Driver YAMAHA OPL3-SAx installation program
************************************
----------------------------------
1. Software that will be installed
----------------------------------
1.Application program (YSTATION)
2.DOS setup utility (SETUPSA)
-------------------------
2. Installation procedure
-------------------------
1.In Windows, start up "SETUP.EXE" .
2.Proceed with installation as directed by the wizard.
3.In some cases, restarting the computer after installation may cause the
OPL3-SAx setting window (SETUPSA) to appear. If this occurs, press the [ENTER]
key. If there are no problems with the settings, SETUPSA will exit, and you can
start up Windows. If there are problems with the settings, an error message will
appear. The appropriate actions to take for each error message and the procedure
for using SETUPSA are explained in the SAREADME.TXT file that was registered
in the Yamaha group, so refer to this file and make the appropriate settings.
----------------------
3. Uninstall procedure
----------------------
1.Click "Start", and then point to "Programs".
2.In the "YAMAHA group" click the "OPL3-SAx uninstall" icon.
3.Proceed with uninstallation as directed by the wizard.
4.When you restart the computer, the condition previous to installation will
be restored.
--------
4. Other
--------
- For details on the device driver, refer to the manual.
- For details on YSTATION, refer to the README file for YSTATION.
- For details on SETUPSA, refer to SAREADME.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
CD-ROM Driver - Mitsumi SR200S
Operating System
MS-DOS-Windows 3.1-95
Version
v.1.51
Size Driver
80KB
File Name
mitsumi.exe
Observations
Mitsumi SR200S 20X CD-ROM Drivers
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
OS2 Warp
Version
v.TZ1.1101
Size Driver
1011KB
File Name
9385os2.exe
Observations
This utility includes Trident OS/2 Display Drivers installation
and Trident OS/2 Display Drivers setting.
Installation Procedure
1. Insert Trident OS/2 Display Drivers diskette in Drive A.
From the OS/2 Desktop:
Open the OS/2 System folder, double-click on the Drives object,
and then double-click on drive A. When the drive A folder opens,
double-click on INSTALL.EXE. You can also click on the floppy
drive object from Launch Pad, and then double-click on INSTALL.EXE.
From the OS/2 Command Line:
Open OS/2 System folder, double-click on Command Prompts, and
double-click on either OS/2 Window or OS/2 Full Screen. Then, at
the command line, go to drive A and type:
INSTALL.EXE
and press Enter.
2. The first page of the installation program's window is Screen
Resolution selection page.
. Select the resolution and color depth.
3. The second page is Monitor Model selection page.
. Click on Monitor tab to go to this page.
. Point to and click on the down arrow button to show a list of
monitor models.
. Select the monitor model. If you cannot find your monitor's
model, select "Default".
4. The third page is Refresh Rate selection page.
. Click on Refresh tab to go to this page.
. The refresh rates displayed are the recommended refresh rate for
each resolution by your monitor manufacturer.
. You can change the refresh rates by clicking on down arrow button
to select the refresh rates for corresponding resolution.
5. The fourth page is Frame Buffer Address selection page (Vesa
Local Bus Adapter only).
. Click Desktop tab to go to this page.
. Point to and click the down arrow button to show a list of
available frame buffer address (in unit of MBytes).
6. After the selections, click on the Install button to complete
the installation.
7. Reboot OS/2 to have this installation take effect.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Audio Drivers - Yamaha Audio OPL-SAx
Operating System
OS2 Warp
Version
v.3.27
Size Driver
1022KB
File Name
opl3dos.exe
Observations
Yamaha OPL3 Driver YAMAHA OPL3-SAx installation program
************************************
----------------------------------
1. Software that will be installed
----------------------------------
1.Application program (YSTATION)
2.DOS setup utility (SETUPSA)
-------------------------
2. Installation procedure
-------------------------
1.In Windows, start up "SETUP.EXE" .
2.Proceed with installation as directed by the wizard.
3.In some cases, restarting the computer after installation may cause the
OPL3-SAx setting window (SETUPSA) to appear. If this occurs, press the [ENTER]
key. If there are no problems with the settings, SETUPSA will exit, and you can
start up Windows. If there are problems with the settings, an error message will
appear. The appropriate actions to take for each error message and the procedure
for using SETUPSA are explained in the SAREADME.TXT file that was registered
in the Yamaha group, so refer to this file and make the appropriate settings.
----------------------
3. Uninstall procedure
----------------------
1.Click "Start", and then point to "Programs".
2.In the "YAMAHA group" click the "OPL3-SAx uninstall" icon.
3.Proceed with uninstallation as directed by the wizard.
4.When you restart the computer, the condition previous to installation will
be restored.
--------
4. Other
--------
- For details on the device driver, refer to the manual.
- For details on YSTATION, refer to the README file for YSTATION.
- For details on SETUPSA, refer to SAREADME.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
Windows 3.1
Version
v.1.2
Size Driver
666KB
File Name
9385vp31.exe
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
Windows 3.x
Version
v.UZ6.3 07.tw.07
Size Driver
978KB
File Name
9385w31.exe
Observations
MS Windows 3.1 TRIDENT TGUI96X0/93XX/94X0 Drivers
==========================================
(UZ6.X 4/96)
This diskette contains the following high-resolution drivers for Windows 3.x:
TRIW1K.DR_ 1024x768-16C Large Font
XGIULV.DR_ Linear Addressing Multi-resolution (640x480, 800x600, 1024x768, 1280x1024) Multi-color (256, 65K and 16.8M) and Virtual Screen
All XGI*.DR_ drivers run with the Trident TGUI9660/9680/9680-1 chip only.
A. Using Windows Utility TINSTALL
---------------------------------
INSTALLATION PROCEDURE
=======================
The graphic installation program (TINSTALL) supports a simple six-step installation procedure for the display driver setup program, the power management program and the UNinstall program.
To use TINSTALL, follow the 6 steps below:
1. Ensure that MS Windows 3.1 is up and running properly, using the standard
VGA driver.
2. Select the MAIN group in Program Manager.
3. Click on FILE or press ALT + F.
4. Press R to get to the command line.
5. Type in "A:TINSTALL" (if the display driver disk is in the B drive then TYPE in "B:TINSTALL") and then press ENTER.
6. A menu will appear, presenting a choice of Express or Custom Installation.
Express Installation is quick and decision free. Display drivers will be
copied into the TRIDENT.XGI directory and Utility files will be copied into
the TRIDENT.UTL directory. Once all files are copied, a program group
called DISPLAY DRIVER AND UTILITY will be created.
Custom installation allows control over file storage and in what program group the icons are placed. The first dialog box that appears shows the default directory to which the display drivers will be copied. To change the directory name select the default name, delete it and then enter the desired directory name.
Once the desired directory name is selected, continue the installation procedure by selecting CONTINUE, or by pressing ENTER. The next dialog box displays a summary of where files are stored. Select CONTINUE to copy the drivers and utilities files. When all files are copied, the program will present a choice of program groups where the icons will be created. Create a new group to place the utility icons or select from pre-existing groups (e.g. main, applications, accessories etc.).
When all necessary files are copied and a group name is selected, the Tinstall program will create three icons :
a. Screen Control (Used to configure display drivers)
b. UNinstall (Used to delete the installed TRIDENT drivers)
c. DPMS (Used for power management configurations)
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Audio Drivers - Yamaha Audio OPL-SAx
Operating System
Windows 3.x
Version
v.4.03.2329
Size Driver
1.7MB
File Name
opl3w31.exe
Observations
YAMAHA OPL3-SAx installation program
************************************
----------------------------------
1. Software that will be installed
----------------------------------
1.OPL3-SAx device driver
2.Application program (YSTATION)
3.DOS setup utility (SETUPSA)
-------------------------
2. Installation procedure
-------------------------
1.In Windows, start up "SETUP.EXE" which is located in the "Disk1".
2.Proceed with installation as directed by the wizard.
3.In some cases, restarting the computer after installation may cause the
OPL3-SAx setting window (SETUPSA) to appear. If this occurs, press the [ENTER]
key. If there are no problems with the settings, SETUPSA will exit, and you can
start up Windows. If there are problems with the settings, an error message will
appear. The appropriate actions to take for each error message and the procedure
for using SETUPSA are explained in the SAREADME.TXT file that was registered
in the Yamaha group, so refer to this file and make the appropriate settings.
----------------------
3. Uninstall procedure
----------------------
1.In the "YAMAHA group" of the "Program manager" double-click the
"OPL3-SAx uninstall"icon.
2.When you restart the computer, the condition previous to installation will
be restored.
--------
4. Other
--------
- For details on the device driver, refer to the manual.
- For details on YSTATION, refer to the README file for YSTATION.
- For details on SETUPSA, refer to SAREADME.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Audio Drivers - Yamaha Audio OPL-SAx
Operating System
Windows 95
Version
v.4.03.2332
Size Driver
1.3MB
File Name
opl3w95.exe
Observations
Yamaha OPL3 Driver
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Core Logic - Intel 430TX
Operating System
Windows 95
Version
v.3.3.0.2
Size Driver
585KB
File Name
piix4w95.exe
Observations
Intel 430TX PIIX4 Core Logic Driver Setup This document contains the following sections:
1. System Requirements
2. Contents of the Distribution Package
3. INF Files updated by the Software
4. Running the Software
5. Verifying INF Update by the Software
6. Troubleshooting
7. Release Notes
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
Windows 95
Version
v.1.2.tw11
Size Driver
688KB
File Name
9385vp95.exe
Observations
1 Installation
================================
1.1. Insert installation diskette in the floppy drive.
1.2. Go to Control Panel -> Add New Hardware
1.3. Select "No" when asked if you want the Windows to search for the new
hardware.
1.4. Select "Other devices" or "Sound, video and game controllers" from
the hardware list.
1.5. Click "Have disk...", type "A:\Win95" in the browser
dialog box and click OK. You will see three lines in the list.
1.6. Select one of the driver in the list, then click OK.
1.7. If you want to continue install other drivers in the list.
Do not select reboot, and follow steps from 1.2 to 1.6.
1.7. Reboot.
1.8. After installation is complete run Media Player. In the "Device"
menu you should see
- MCI Overlay Driver
2. Trident CODEC driver tricodc.drv
====================================
2.1. The enclosed tricodc.drv is a 32 bit version codec
driver for Windows 95.
2.2. Before installing this codec driver, you need to
install 9385 display driver and DirectDraw.
So Windows 95 can provide DirectDraw services.
Otherwise, this codec driver will not detect
DirectDraw services, and will try to use GDI
services, which results in less quality video.
2.3. You can now use Media Player to play the avi
files captured using trident 9385 capture
drivers.
2.4. Known bugs:
i) Only part size of video is shown if the window
size is smaller than the video size in video
buffer (Current DirectDraw driver can not
handle scaling down).
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
Windows 95
Version
v.5.00.10TW.1808
Size Driver
538KB
File Name
9385w95.exe
Observations
Change History:
***************
12/16/97 V.5.00.10.TW1808
1. For 9385 and 9385_1, we correct TV's supportting resolutions.
2. Fixed system hang-up problem in some Sharp model of Notebook machine.
12/09/97 V.5.00.10.TW1707
1. we fixed the TV PAL/NTSC switched incorrectly.
2. we fixed the bug that shows display device radios incorrectly
3. we fixed the bug that shows the wrong resolutions switching between three color types
4. we modified some transformations in LCD page ,Display page in japanese version.
5. we fixed the problem that the video playback will display incorrectly
when switching LCD between "Center" and "Expansion" mode.
11/26/97 V.5.00.10.TW1605
1.we add a new dialog for not supporting TV for english ,japanese ,korean version
It just displays in some condition when not support TV
2.we fixed the problem that the resolution of all display device
are changed to 640*480 when open display properties on TV
3.we fixed the problem that the system will hang up when run game SEGA RALLY
and press F3
11/19/97 V.5.00.10.TW1504
1.we fixed the problem that utility shows display device icon incorrectly
when user change divice by "Hot_Key"
2.we fixed the problem that the display will crash while
moved the "Screen shift" bar after changed the "Flick reduction" on TV
3.we fixed the problem that the cursor disappear when using utility
to change the output device to Pal TV 256 color ,Underscan ,Drop line mode.
4.we fixed the problem that the color of wallpaper is changed
while using 256 color wallpaper run Internet Explorer.
5.we fixed the problem that the video display using "ActiveMove" Player
is not resumed after Low-power standby.
10/20/97 V.5.00.10.TW1403
1.we fixed the problem that AVI/MPEG/VideoCD playback
(full screen)in 9385 doesn't work well
2.we fixed the problem that the system will hang when restarting
3.We fixed the non_reset_resolution problem for non_support_TV
4.we adjust the algorithm in adjust refresh rate number
5.we changed the display message for Japanese version
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
PCMCIA Driver - O2 Micro 6832
Operating System
Windows 95
Version
[-d]
Size Driver
179KB
File Name
o2micw9x.exe
Observations
O2 Micro 6832/6836/6860 PCMCIA Driver Utility File Descriptions:
o2init.sys, o2init.com, o2init.doc:
These files are used to initialize various registers on the O2Micro cardbus
controller from a script (.dat) file. See o2init.doc for help.
preg.exe:
A DOS utility to view/edit PCI configuration space of PCI devices.
o2sw.exe:
A Windows utility to control O2Micro Zoom Video features.
o2.exe:
A DOS utility to view/edit PCMCIA ExCA registers.
o2acpi.exe:
A Windows utility to enable/set ACPI modes of an ACPI CardBus controller.
Debugging an O2Micro Cardbus controller:
A cardbus controller is a PCI device with standard PCI registers. The
cardbus controller registers are memory mapped at the location set in PCI
register 10h. Under Win95, the device manager properties can be examined
to find that memory location. However, Win95 maps this memory to some
other address. This makes debugging the cardbus controller a bit tricky.
The easiest way to debug is to use SoftIce for Win95. To find the
cardbus registers in SoftIce, use the 'phys' command to translate the
memory address to the physical memory address. For example 'phys C8000'
gives an address like C1297000. To dump the registers do 'd #30:c1297000'.
Cardbus registers are mapped into this memory block at offset 0, and the
pcmcia/ExCA registers are mapped into this memory at offset 800h.
The O2Micro Cardbus Controller is a single chip with 2 PCI devices
(functions). Windows 95 views the chip as 2 separate PCI devices so there
are two O2Micro entries in the Device Manager display, and there are two
blocks of memory allocated, one for each PCI function of the controller.
You find the memory mapped registers for each function the same way,
but Win95 maps their addresses independently and they might not be in
contiguous locations. Take care when translating the memory addresses,
and also make sure the the memory you are viewing is correct for the
slot you are testing.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Internal 33.6k Voice/Fax/Modem - Rockwell
Operating System
Windows 95
Size Driver
590KB
File Name
27modem.exe
Observations
Driver Setup For Version 1.00
-----------------------------
Installation files:
1)Rkv336.inf
2)Rkv336~1.inf
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Audio Drivers - Yamaha Audio OPL-SAx
Operating System
Windows NT
Version
v.4.00.2313
Size Driver
148KB
File Name
opl3wnt.exe
Observations
Yamaha OPL3 Driver
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
Windows NT 3.5/3.51
Version
v.3.5.40
Size Driver
56KB
File Name
9385nt35.exe
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Core Logic - Intel 430TX
Operating System
Windows NT 4
Size Driver
313KB
File Name
piix4nt4.exe
Observations
Intel 430TX PIIX4 Core Logic Driver Setup This document contains the following sections:
1. System Requirements
2. Installing the Software
3. Verifying Installation of the Software
4. Un-installing the Software
5. Troubleshooting
6. Identifying the Software Version Number
7. Contents of the Distribution Package
8. Storage Devices Supported by the Driver
9. Release Notes
a. General Release Information
b. Release-Specific Troubleshooting Information
c. Release Testing Information
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2700
Description
Video Drivers - Trident Microsystems - Trident Cyber 9385F
Operating System
Windows NT4
Version
v.1.2
Size Driver
198KB
File Name
9385nt40.exe
Observations
WINDOWS NT DRIVER SETUP INFORMATION
for
Trident 93xx/94xx/96xx Users
Windows NT Device Drivers Version 1.20
******************************
Contents
1.0 Introduction
2.0 Supported Resolutions
3.0 Installation Notes for Windows NT Version 4.0
Access to Official Website Chem Usa
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.