Available 23 files for Chem Usa ChemBook 9780P
Select Files
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Video Drivers
Size Driver
3.8MB
File Name
9780p_video.zip
Observations
ATI video driver
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
CD ROM
Size Driver
66KB
File Name
9780p_cdrom.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Utility
Size Driver
17KB
File Name
9780p_utility.zip
Observations
Awdflash , Zvhdd
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
BIOS Updates
Size Driver
1.1MB
File Name
9780p_bios.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Docking Station
Size Driver
398KB
File Name
9780p_ds.zip
Observations
How to Install ACARD Drivers for ATOP Chipset on Docking Station:
.WindowsNT 4.0
1. Setting Plug & Play O/S to "NO" of Main item of CMOS SETUP.
2. Installed NT4.0, NT Service pack 3 and others Driver, Ex: VGA,Sound,PCMCIA...
3. Shut Down and Power off.
4. NoteBook Conection to Docking Station.
5. Power on, Go into NT4.0 then insertion the ACARD Drivers Diskette Drive A.
6. Run setup32.exe in diskette of ACARD Drivers.
7. Click "Yes" for "Install OK" and "Reboot Now?" screen to Reboot.
8. After Reboot, Go to "My Computer", Control Panel, SCSI Adapters to check
"ATP850U" of Devices item is found.
.Windows 95/ 98
1. Turn on the NoteBook Power, Go into Windows95 or Windows98.
2. Under Windows95/ 98, Connection to Docking Station (Hot Dock).
3. System will Go into "Hardware Detection" (This may take several minutes..).
4. Click "OK" for Configuration Setup screen to continue.
5. Insertion the ACARD Drivers Diskette to Drive A.
6. Click "Next" for "PCI SCSI Bus Controller to continue.
7. Click "Next" for Search for the best Driver..... to continue.
8. Browse to a:\win95 Click "OK".
9. Click "Next" to Continue.
10. Click "Finish" to Done.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
FIR
Operating System
MS-DOS-Windows 95
Size Driver
5.7MB
File Name
9780p_firw95.zip
Observations
CONTENTS
I. Trouble Shooting
1. Parallel Cable Connection
2. Serial Cable Connection
3. Infrared Connection
II. Synchronization
1. File Synchronization
2. PIM Synchronization
III. Other Issues
1. Using IntelliSync 97 for Windows with TranXit.
2. Installing support for an Infrared Device from the Connection
Setup Manager if support for an Infrared Device had not been
installed during setup.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Modem
Operating System
MS-DOS-Windows 95
Size Driver
369KB
File Name
9780p_modw95.zip
Observations
README TABLE OF CONTENTS
1. Installation
1.1 Standard Installation
1.2 Drivers Only Installation
1.3 Manually Decompressing Files
2. Uninstall Program
3. Features
3.1 Zooming in Windows 9x and NT 4.0
4. Troubleshooting
4.1 Detection Problems with PS/2 Pointing Devices
4.2 Conflicts with other Serial Devices
4.3 Power Management Problems
4.4 Enhanced Mouse Control Panel is not Updated
4.5 Scrolling/wheel related issues
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Mouse
Operating System
MS-DOS-Windows 95
Size Driver
1.6MB
File Name
9780p_mosw95.zip
Observations
README TABLE OF CONTENTS
1. Installation
1.1 Standard Installation
1.2 Drivers Only Installation
1.3 Manually Decompressing Files
2. Uninstall Program
3. Features
3.1 Zooming in Windows 9x and NT 4.0
4. Troubleshooting
4.1 Detection Problems with PS/2 Pointing Devices
4.2 Conflicts with other Serial Devices
4.3 Power Management Problems
4.4 Enhanced Mouse Control Panel is not Updated
4.5 Scrolling/wheel related issues
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Piix4
Operating System
MS-DOS-Windows 95
Size Driver
570KB
File Name
9780p_piiw95.zip
Observations
This document contains the following sections:
1. System Requirements
2. Contents of the Distribution Package
3. INF Files updated by the Software
4. Running the Software
5. Verifying INF Update by the Software
6. Troubleshooting
7. Release Notes
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Audio Drivers
Operating System
MS-DOS-Windows 95
Size Driver
6MB
File Name
9780p_audw95.zip
Observations
1) To turn off CRL Positional 3D:
crlp3d off
CRL Positional 3D will be turned off after system reboot.
2) To turn on CRL Positional 3D:
crlp3d on
CRL Positional 3D will be turned on after system reboot.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
O2Micro
Operating System
MS-DOS-Windows 95
Size Driver
169KB
File Name
9780p_o2mw95.zip
Observations
O2 Micro Pcmcia driver and tools O2Micro Cardbus Controller Software Installation
------------------------------------------------
Win95 (release 1):
Win 95 supports PCMCIA/PCIC controllers, but does not directly support
CardBus controllers. A newer bios will initialize a CardBus chip
as a Legacy mode PCIC controller, but bioses that do this are still
rare. If your bios does not initialize the CardBus controller to
Legacy mode, use o2init.sys to initialize the controller at boot time.
Windows95 OSR2 and Windows98:
Install the O2Micro board and run O2Setup.exe. This will copy
some files and add registry keys. You will have to reboot to load
the new drivers.
Windows3.1/3.11 and MS-Dos:
Win 3.1 and MSDos do not include any drivers for Cardbus or Pcmcia. You
will need to install third party drivers from Phoenix, SystemSoft, Award,
or others to test the O2Micro controller. You need to put the controller
in the Legacy mode before installing the third party software.
Debugging an O2Micro Cardbus controller:
A cardbus controller is a PCI device with standard PCI registers. The
cardbus controller registers are memory mapped at the location set in PCI
register 10h. Under Win95, the device manager properties can be examined
to find that memory location. However, Win95 maps this memory to some
other address. This makes debugging the cardbus controller a bit tricky.
The easiest way to debug is to use SoftIce for Win95. To find the
cardbus registers in SoftIce, use the 'phys' command to translate the
memory address to the physical memory address. For example 'phys C8000'
gives an address like C1297000. To dump the registers do 'd #30:c1297000'.
Cardbus registers are mapped into this memory block at offset 0, and the
pcmcia/ExCA registers are mapped into this memory at offset 800h.
The O2Micro Cardbus Controller is a single chip with 2 PCI devices
(functions). Windows 95 views the chip as 2 separate PCI devices so there
are two O2Micro entries in the Device Manager display, and there are two
blocks of memory allocated, one for each PCI function of the controller.
You find the memory mapped registers for each function the same way,
but Win95 maps their addresses independently and they might not be in
contiguous locations. Take care when translating the memory addresses,
and also make sure the the memory you are viewing is correct for the
slot you are testing.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Video Drivers
Operating System
MS-DOS-Windows 95
Size Driver
2MB
File Name
9780p_vgaw95.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
O2Micro
Operating System
MS-DOS-Windows 98
Size Driver
169KB
File Name
9780p_o2mw98.zip
Observations
O2 Micro Pcmcia driver and tools O2Micro Cardbus Controller Software Installation
------------------------------------------------
Win95 (release 1):
Win 95 supports PCMCIA/PCIC controllers, but does not directly support
CardBus controllers. A newer bios will initialize a CardBus chip
as a Legacy mode PCIC controller, but bioses that do this are still
rare. If your bios does not initialize the CardBus controller to
Legacy mode, use o2init.sys to initialize the controller at boot time.
Windows95 OSR2 and Windows98:
Install the O2Micro board and run O2Setup.exe. This will copy
some files and add registry keys. You will have to reboot to load
the new drivers.
Windows3.1/3.11 and MS-Dos:
Win 3.1 and MSDos do not include any drivers for Cardbus or Pcmcia. You
will need to install third party drivers from Phoenix, SystemSoft, Award,
or others to test the O2Micro controller. You need to put the controller
in the Legacy mode before installing the third party software.
Debugging an O2Micro Cardbus controller:
A cardbus controller is a PCI device with standard PCI registers. The
cardbus controller registers are memory mapped at the location set in PCI
register 10h. Under Win95, the device manager properties can be examined
to find that memory location. However, Win95 maps this memory to some
other address. This makes debugging the cardbus controller a bit tricky.
The easiest way to debug is to use SoftIce for Win95. To find the
cardbus registers in SoftIce, use the 'phys' command to translate the
memory address to the physical memory address. For example 'phys C8000'
gives an address like C1297000. To dump the registers do 'd #30:c1297000'.
Cardbus registers are mapped into this memory block at offset 0, and the
pcmcia/ExCA registers are mapped into this memory at offset 800h.
The O2Micro Cardbus Controller is a single chip with 2 PCI devices
(functions). Windows 95 views the chip as 2 separate PCI devices so there
are two O2Micro entries in the Device Manager display, and there are two
blocks of memory allocated, one for each PCI function of the controller.
You find the memory mapped registers for each function the same way,
but Win95 maps their addresses independently and they might not be in
contiguous locations. Take care when translating the memory addresses,
and also make sure the the memory you are viewing is correct for the
slot you are testing.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Audio Drivers
Operating System
MS-DOS-Windows 98
Size Driver
6MB
File Name
9780p_audw98.zip
Observations
1) To turn off CRL Positional 3D:
crlp3d off
CRL Positional 3D will be turned off after system reboot.
2) To turn on CRL Positional 3D:
crlp3d on
CRL Positional 3D will be turned on after system reboot.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Video Drivers
Operating System
MS-DOS-Windows 98
Size Driver
2MB
File Name
9780p_vgaw98.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Mouse
Operating System
MS-DOS-Windows 98
Size Driver
1.6MB
File Name
9780p_mosw98.zip
Observations
README TABLE OF CONTENTS
1. Installation
1.1 Standard Installation
1.2 Drivers Only Installation
1.3 Manually Decompressing Files
2. Uninstall Program
3. Features
3.1 Zooming in Windows 9x and NT 4.0
4. Troubleshooting
4.1 Detection Problems with PS/2 Pointing Devices
4.2 Conflicts with other Serial Devices
4.3 Power Management Problems
4.4 Enhanced Mouse Control Panel is not Updated
4.5 Scrolling/wheel related issues
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Modem
Operating System
MS-DOS-Windows 98
Size Driver
369KB
File Name
9780p_modw98.zip
Observations
README TABLE OF CONTENTS
1. Installation
1.1 Standard Installation
1.2 Drivers Only Installation
1.3 Manually Decompressing Files
2. Uninstall Program
3. Features
3.1 Zooming in Windows 9x and NT 4.0
4. Troubleshooting
4.1 Detection Problems with PS/2 Pointing Devices
4.2 Conflicts with other Serial Devices
4.3 Power Management Problems
4.4 Enhanced Mouse Control Panel is not Updated
4.5 Scrolling/wheel related issues
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
FIR
Operating System
MS-DOS-Windows 98
Size Driver
5.7MB
File Name
9780p_firw98.zip
Observations
CONTENTS
I. Trouble Shooting
1. Parallel Cable Connection
2. Serial Cable Connection
3. Infrared Connection
II. Synchronization
1. File Synchronization
2. PIM Synchronization
III. Other Issues
1. Using IntelliSync 97 for Windows with TranXit.
2. Installing support for an Infrared Device from the Connection
Setup Manager if support for an Infrared Device had not been
installed during setup.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Mouse
Operating System
MS-DOS-Windows NT
Size Driver
1.6MB
File Name
9780p_moswnt.zip
Observations
README TABLE OF CONTENTS
1. Installation
1.1 Standard Installation
1.2 Drivers Only Installation
1.3 Manually Decompressing Files
2. Uninstall Program
3. Features
3.1 Zooming in Windows 9x and NT 4.0
4. Troubleshooting
4.1 Detection Problems with PS/2 Pointing Devices
4.2 Conflicts with other Serial Devices
4.3 Power Management Problems
4.4 Enhanced Mouse Control Panel is not Updated
4.5 Scrolling/wheel related issues
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Video Drivers
Operating System
MS-DOS-Windows NT
Size Driver
682KB
File Name
9780p_vgawnt.zip
Observations
Contents
1.0 Introduction
1.1 Supported Resolutions
2.0 Installation Notes for Windows NT
2.1 Uninstalling the Windows NT drivers
3.0 Known Problems
4.0 Reporting Problems
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
Audio Drivers
Operating System
MS-DOS-Windows NT
Size Driver
131KB
File Name
9780p_audwnt.zip
Observations
Contents
CONTENTS 1
ABOUT THIS RELEASE 2
RELEASE INFORMATION 2
RELEASE DESCRIPTION 2
KNOWN PROBLEMS 2
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
BIOS Updates
Operating System
Windows 98
Version
17T02l
Size Driver
225KB
File Name
978p1702l.exe
Observations
For 12.1, 13.3 Panasonic LCD Recommended Flash EPROM (BIOS) Management & Updating Procedures
============================================================================
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from
the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.
2. Copy the extracted files to your new diskette.
3. At the "A:\" prompt, type: [9780p] or [flash989 v17t02l.bin /py /sn /cc /cp /cd]
and then the
WARNING: If the Flash Memory Writer utility was not able to successfully
download a complete BIOS file, your system may not be able to boot up.
If this happens, your system will need service from your vendor.
4. Turn off your computer after successfully flashing the new BIOS.
5. Turn on your computer and hold down the key to enter BIOS setup.
You must select "Setup Default" to affect the new BIOS, then you may
set other items from the Menu.
6. Be sure to enable Plug and Play OS support if you are running Windows 95.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 9780P
Description
BIOS Updates
Operating System
Windows 98
Version
17T02
Size Driver
205KB
File Name
978p1702.exe
Observations
For 13.3, 14.1, 15.1 LG LCD Recommended Flash EPROM (BIOS) Management & Updating Procedures
============================================================================
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from
the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.
2. Copy the extracted files to your new diskette.
3. At the "A:\" prompt, type: [9780p] or [flash989 v17t02.bin /py /sn /cc /cp /cd]
and then the
WARNING: If the Flash Memory Writer utility was not able to successfully
download a complete BIOS file, your system may not be able to boot up.
If this happens, your system will need service from your vendor.
4. Turn off your computer after successfully flashing the new BIOS.
5. Turn on your computer and hold down the key to enter BIOS setup.
You must select "Setup Default" to affect the new BIOS, then you may
set other items from the Menu.
6. Be sure to enable Plug and Play OS support if you are running Windows 95.
Access to Official Website Chem Usa
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.