Available 4 files for Iwill P4ES

Company

Iwill

Categories

Other Peripherals

Model

Iwill P4ES

Description

Drivers ICH4 USB

Operating System

Windows 2000

Size Driver

522KB

File Name

ich4_usb_2k.zip

Observations

Iwill Power Installer USB2.0 Driver Installation Guide
Windows 2000
(path: \drivers\Usb\2k\ )
After you install the Intel USB2.0 Device Driver in the computer,
Using the Wizard, follow this procedure to install the correct driver.
1. On the Wizard Welcome screen, click Next to start.
If the Wizard didn¡t appear, you need to install driver manually.
a. First, right click
b. Then select
c. Next click tab
d. Then click
e. Next double click
f. Then click tab and follow the installation guide point 2.
2. On the next screen choose the Search option and click Next.
3. Click the CD-ROM box only on the Locate Driver screen and click Next.
( :\drivers\Usb\2k\) Click Next to continue
4. If you see a Digital Signature message, click YES to continue.
5. The necessary files are copied to your computer.
The wizard displays a Completed message. Click Finish.

Company

Iwill

Categories

Other Peripherals

Model

Iwill P4ES

Description

Drivers Silicon Image Sil3112ct144 Serier Ata

Operating System

Windows 2000-XP-NT

Size Driver

109KB

File Name

serial_ata.zip

Observations

Table of Contents
-----------------

1) Windows NT 4.0 and Windows 2000/XP Fresh Installation.

2) Adding the SiI 3112 controller to an existing Windows NT installation.

3) Adding the SiI 3112 controller to an existing Windows 2000/XP installation.

4) Verifying controller installation under Windows NT, 2000 and XP.

5) Update SiI 3112 driver on Windows NT 4.0.

6) Update SiI 3112 driver on Windows 2000/XP.

7) Windows 98SE and Windows ME Fresh Installation Instructions.

8) Adding the SiI 3112 controller to an existing Windows 98SE/ME installation.

9) Update SiI 3112 driver on Windows 98SE/ME.

10) Verifying controller installation under Windows 98/SE/ME.

------------------------------------------------------------------------------
1) Windows NT 4.0 and Windows 2000/XP Fresh Installation
------------------------------------------------------------------------------
Follow the instructions in this section if you are performing a new
installation of Windows NT 4.0 or Windows 2000/XP, and you wish to
boot from a device attached to the SiI 3112 controller.
1. Power off the system. Insert the SiI 3112 controller into an available
PCI slot. Connect serial ATA cable(s) between the SiI 3112 controller
and the serial ATA device(s). Power up the system.

2. Put your Windows NT/2000/XP CD into the CD-ROM/DVD drive, or the NT/2000
boot diskette #1 in the floppy drive if your system cannot boot from the
CD.

3. Press F6 for third party SCSI or driver installation at the beginning
of text mode installation. Press 's' when setup asks if you want to
specify an additional device, and insert the diskette labeled
'Silicon Image SiI 3112 SATALink Driver Installation Disk'.
Press 'Enter' and select
'Silicon Image SiI 3112 SATALink Serial ATA Controller'.

4. Press 'Enter' again when prompted to continue on with text mode setup.

5. Follow the setup instructions to select your choice for partition and
file system.

6. After setup examines your disks, it will copy files from the CD to the
hard drive selected above and restart the system. After restart the
setup process will resume to finish the installation.

7. Once the operating system installation has completed you can follow the
instructions in section 4 to verify controller was installed correctly.

------------------------------------------------------------------------------
2) Adding the SiI 3112 controller to an existing Windows NT installation
------------------------------------------------------------------------------
Follow the instructions in this section to install the Silicon Image
SiI 3112 driver on a system already running Windows NT 4.0.
1. Power off the system. Insert the SiI 3112 controller into an available
PCI slot. Connect serial ATA cable(s) between the SiI 3112 controller
and the serial ATA device(s). Power up the system.

Company

Iwill

Categories

Other Peripherals

Model

Iwill P4ES

Description

Drivers PRomise Ata133

Operating System

Windows 98-Me-2000-XP-NT

Size Driver

143KB

File Name

promise.zip

Observations

Contents on the disk
====================
README TXT This readme file
ULTRA Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file

WINXP

Company

Iwill

Categories

Other Peripherals

Model

Iwill P4ES

Description

Drivers ICH4 USB

Operating System

Windows XP

Size Driver

530KB

File Name

ich4_usb_xp.zip

Observations

Iwill Power Installer USB2.0 Driver Installation Guide
Windows XP
(path: \drivers\Usb\xp\ )
After you install the Intel USB2.0 Device Driver in the computer,
Using the Wizard, follow this procedure to install the correct driver.
1. On the Wizard Welcome screen, click Next to start.
If the Wizard didn¡t appear, you need to install driver manually.
a. First, right click
b. Then select
c. Next click tab
d. Then click
e. Next double click
f. Then click tab and follow the installation guide point
2.
2. On the next screen choose the Search option and click Next.
3. Click the CD-ROM box only on the Locate Driver screen and click Next.
( :\drivers\Usb\xp\) Click Next to continue
4. If you see a Digital Signature message, click YES to continue.
5. The necessary files are copied to your computer.
The wizard displays a Completed message. Click Finish.