Available 2 files for Guillemot Maxi Magic Theater New version of DVD Station
Select Files
Company
Guillemot
Categories
Graphics cards
Model
Guillemot Maxi Magic Theater New version of DVD Station
Description
for Real Magic Hollywood Plus
Operating System
Windows 2000
Version
2.0
Size Driver
1.1MB
File Name
ahp2k20.zip
Observations
GENERAL INFORMATION
===================
- DTS audio is supported : whenever you choose the DTS option in a
movie menu the OUTPUT WILL BE DIRECTED THRU THE SP/DIF OUPUT IN
DIGITAL FORMAT REGARDLESS OF THE DVD STATION AUDIO OUPUT SETTING,
so the DTS stream is NOT decoded thru the analog mini audio jack.
- You can use the Hollywood Plus without the pass-thru cable, but
in this case the video playback will be available on TV only
(and not on the VGA monitor). The system will detect the
presence of this cable at booting time. So connecting or
disconnecting it during a Windows session is not correct.
A reboot is needed to notify the Hollywood Plus driver.
- If you insert a movie with a region code mismatching the DVD-ROM
drive region - for RPC2 drives, the tray will be ejected and a
Windows error message issued.
CONTENTS
========
I - DRIVER AND APPLICATIONS INSTALLATION
II - BORDER ADJUSTMENT AND COLOR CALIBRATION
III - DVD REGION CODE CHANGE
IV - TV OUT
V - FULL SCREEN PLAYBACK
I - DRIVER AND APPLICATIONS INSTALLATION
====================================
Note : You need to have the Administrator rights to be able to
install this software because its modifications to the
registry.
1. On booting your system, Windows 2K will detect the card. Insert the
REALmagic Hollywood Plus Drivers Disk in your floppy drive A and
click Finish. This will install Hollywood Plus drivers on your hard
disk.
2. To install the DVD navigation software insert Application Disk into
drive A and run SETUP.
3. The Setup program will show two options: Install the REALmagic DVD
application or Change the DVD region code.
4. Check the DVD application installation option and follow the
instructions.
5. After the files are copied, set a DVD region code as part of the
setup program (if not already set up under Win 9x or Win NT 4.0).
Note: Setup will not ask you to set the DVD region code if you
install the card later in the same region.
6. Click Finish to complete the installation process by performing
Auto Calibration. PLEASE REBOOT THE SYSTEM.
NOTE 1 : for these beta drivers, you might get in a status after
installing and uninstalling the drivers in which you need
to perform a clean uninstall/install. For a clean Uninstall,
do the following :
a - run the Uninstall app in the REALmagic group that uninstalls the
application only
b - right-click "My Computer", select Hardware - Device Manager -
"Sound, Video,...." - double-click "Sigma Designs Hollywood Plus"-
select Driver - click Uninstall. This will uninstall the P-n-P.
c - delete in the WINDOWS\SYSTEM32\DRIVERS directory the .SYS files :
VPFILTER, MPEGPORT, RMQUASAR, and RMDVD.
d - delete the same sub-entries in the Registry entry :
HKEY_LOCAL_MACHINE - SYSTEM - CurrentControlSet - Services
e - delete the OEMx.INF file from WINDOWS\INF (where x is a number
depending on your system but the slected file should have the
"Sigma Designs ... signature in its last two lines).
Company
Guillemot
Categories
Graphics cards
Model
Guillemot Maxi Magic Theater New version of DVD Station
Description
with remote control
Operating System
Windows 95-98-98Se-Me
Version
1.82
Size Driver
1.1MB
File Name
ahpr9x182.zip
Observations
CONTENTS
========
I - DRIVER AND APPLICATIONS INSTALLATION
II - BORDER ADJUSTMENT AND COLOR CALIBRATION
III - DVD REGION CODE CHANGE
IV - TV OUT
V - FULL SCREEN PLAYBACK
VI - HINTS TO RESOLVE PROBLEMS AND BETTER PLAYBACK
I - DRIVER AND APPLICATIONS INSTALLATION
====================================
After the hardware installation of the card do the following:
1. For an existing installation (if not go to step 2): uninstall the
previous software by going to the REALmagic Group - Uninstall,
reboot, and follow next steps 2 to 7 below.
NOTE : You do not need when running SETUP of step 5 to set the
region code again as mentioned in step 6.
2. On booting your system, Windows 9X will detect the card. Insert the
REALmagic Hollywood Plus Drivers Disk in your floppy drive A and
click Finish. This will install Hollywood Plus drivers on your hard
disk.
3. To install the DVD navigation software insert Application Disk into
drive A and run SETUP.
4. The Setup program will show two options: Install the REALmagic DVD
application or Change the DVD region code.
5. Check the DVD application installation option and follow the
instructions.
6. After the files are copied, set a DVD region code as part of the
setup program.
Note: Setup will not ask you to set the DVD region code if you
install the card later in the same region.
7. Click Finish to complete the installation process by performing
Auto Calibration.
II - BORDER ADJUSTMENT AND COLOR CALIBRATION
=======================================
NOTE: If the border is not adjusted properly after Auto Calibration
you may need to set the Border Adjustment to get more
accurate adjustment. You need to set the Border Adjustment
only once for each setting of display resolution.
1. At the Start button, click Programs and select REALmagic Hollywood
Plus program group. Click REALmagic Configuration.
2. Click on Adjust Border and use the proper buttons to adjust the
black rectangle in the magenta box.
3. Change different values to adjust stability if you are viewing
jumping pixels on MPEG video. Click OK when you are done.
4. The Reset Default button will reset the color calibration and
border adjustment values to the factory default settings.
Note 1: Color calibration is required if the colors are not
normal or the screen is pink or not clear. If color
calibration is required, Click on "Auto Calibration". The
screen will flash for 5 to 10 seconds then displays a
message that the calibration is complete. Click OK.
Note 2: In the cases where this calibration is unsuccessful,
you can click on Advanced..., then the Manual
Calibration. This will involve fixing the R, G, B
sliders as shown in the window four times. You can use the
up/down arrow keys for fine tuning and you don't need
necessarily to see the cross but just the disappearance
of the vertical bar.
Access to Official Website Guillemot
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.