Available 7 files for I-OMagic MagicVIdeo 3Dep AGP
Select Files
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 SIS 6326 IPC380
Operating System
Windows 2000
Size Driver
159KB
File Name
sis6326win2k.exe
Observations
SiS6326 Windows 2000 Driver Installation Procedure (V1.28whql)
ˇ° Windows 2000 supports Plug and Play function so a SiS6326 card will be detected
automatically by a Windows 2000 system if it is installed at the first time.
A "Found New Hardware Wizard" will appear to guide users to locate the driver.
Here is the driver installation procedure.
1. Press "Next" in "Found New Hardware Wizard" to continue.
2. The wizard will show the found device as "Video Controller (VGA compatible)" and
ask what to do next. Select "Display a list of the known drivers for this device
so that I can choose a specific driver" then press "Next".
3. Select "Display Adapters" as the hardware type then press "Next".
4. The wizard will give a list of display devices and ask to select a device driver.
Press "Have Disk".
5. A "Install From Disk" will pop out. Press "BrowseˇK" to assign the driver path.
6. In the "Locate File" window, find out the file "Sisv6326.inf" then press "Open".
7. After go back to "Install From Disk" window, press "OK".
8. After go back to "Select a device driver" window (step 4), a "SiS 6326" message will
appear as "Models". Press "Next".
9. Press "Next" under window "Start Device Driver Installation" to proceed the installation.
10. After the installation is complete, the wizard will inform users the completeness.
Press "Finish".
11. Restart the computer.
ˇ° If the "Found New Hardware Wizard" does not pop out itself, users are able to start it up
by the following steps.
1. Open "My Computer".
2. Open "Control Panel".
3. Open "Add/Remove Hardware".
4. The "Add/Remove Hardware Wizard" will appear. Press "Next".
5. Select "Add/troubleshoot a device" as hardware task then press "Next".
6. Select "SiS6326" or "None of the following devices" then press "Next".
7. This will guide users to the above step 2. Now, users are able to follow up the
procedure to finish the installation.
ˇ° If SiS6326 driver has ever been installed and a user would like to update its driver,
he/she can follow up the below steps to do it.
1. Open "My Computer".
2. Open "Control Panel".
3. Open "System".
4. Select "Device Manager" under the tab "Hardware" in "System Properties".
5. Double click on "SiS 6326".
6. Open "Driver" under "SiS 6326 Properties".
7. Press "Update Driver".
8. The "Upgrade Device Driver Wizard" will guide users to finish the procedure.
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 SIS 6326 IPC380
Operating System
Windows 95
Size Driver
7.7MB
File Name
sis6326win95.exe
Observations
[version]
Class=DISPLAY
signature="$CHICAGO$"
Provider=%Mfg%
CatalogFile=sis6326.cat
[DestinationDirs]
DefaultDestDir=11
Driver.Copy = 11
Inf.Copy=17
Inf.Delete=17
Setuplib.Copy=11
ICD.Delete=11
[SourceDisksNames]
1="Windows 95 SiS 6326 Driver Disk",,0
[SourceDisksFiles]
sis6326m.drv=1
sis6326m.vxd=1
dd326.dll=1
dd326_32.dll=1
sis6326m.inf=1
setuplib.dll=1
sis6326.cat=0,,920
[Manufacturer]
%Mfg%=Mfg
[Mfg]
%PCI\VEN_1039&DEV_6326.DeviceDesc%=Driver.Install, PCI\VEN_1039&DEV_6326
;----------------------------------------
; for .inf setup
[Driver.Install]
DelFiles=ICD.Delete
CopyFiles=Driver.Copy, Inf.Copy
DelReg=Prev.DelReg1, Prev.DelReg2
AddReg=Driver.AddReg1, Driver.AddReg2
UpdateInis=MMPower.UpdateInis
[SystemIni.Update]
%10%\System.ini,boot,,"display.drv=sis6326m.drv",0
[SystemIni.Restore]
%10%\System.ini,boot,,"display.drv=pnpdrvr.drv",0
[MMPower.UpdateInis]
%10%\System.ini,386Enh,,"EMMExclude=C000-CFFF",0
; for setup.exe
[Setup.DriverCopy]
DelFiles=ICD.Delete
CopyFiles=Driver.Copy, Inf.Copy, Setuplib.Copy
; for setup.exe
[Setup.Registry]
;UpdateInis=SystemIni.Update
DelReg=Prev.DelReg1, Prev.DelReg2
AddReg=Driver.AddReg1, Driver.AddReg2
UpdateInis=MMPower.UpdateInis
; for package uninstall
; don't rename this section
[P.U]
UpdateInis=SystemIni.Restore
DelReg=Prev.DelReg1, Prev.DelReg2, Uninstall.DelReg
AddReg=Driver.Standard
DelFiles=Driver.Copy, Inf.Copy
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 Intel i740 IPC380
Operating System
Windows 95
Size Driver
703KB
File Name
inteli740win95.exe
Observations
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Graphic Accelerator Driver Installation Procedure
4.0 Web Site Location and Access
**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the Intel740(tm) graphics accelerator
software, and latest version of DirectX*. The software and hardware
requirements for this release are as follows:
## Software Drivers (SDR) Version: PV3.0W
## Windows* 95 Version: OSR2.1 or 2.5**
## Windows* 98 Version: RCO (1691)
## DirectX* 5.0 Version: RC2-Gold (4.05.01.1650)
## Indeo CODEC 4.4, 4.5
## Video BIOS version: 212, 220, 230, 231
## Intel740 graphics accelerator stepping A2
----------------
Version number
----------------
## Driver Release Version #
PV1.0 4.10.01.1516-980316
PV1.0a 4.10.01.1526-980326
PV1.5 4.10.01.1701-980501
PV2.0a 4.10.01.1915-980715
PV2.1 4.10.01.1927-980727
PV3.0w 4.10.01.2029-980829
Video BIOS/Driver compatible combination
VIDEO BIOS PV 1.0 PV1.0a PV 1.5 PV 2.0a PV 2.1 PV3.0w
---------- ------ ------ ------ ------- ------ ------
VB212 yes yes yes yes yes yes
VB220 no no yes yes yes yes
VB230 no no no yes yes yes
VB231 no no no no no yes
The Intel740(tm) graphics accelerator is optimized to run with the
following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors
(2) Motherboard: Based on the Intel(R) 440LX, 440BX, 440GX AGPset
or a later generation Intel AGPset, motherboard must have an
unpopulated AGP slot or the Intel740 chip must be down on the
motherboard
(3) Operating System: Windows* 95 OSR 2.1 or later (with USB
Supplement) or Windows* 98.
**When loading the Intel740 drivers and OSR2.1 or OSR 2.5 for the
first time, the software should be loaded in the following order:
(1) Load OSR2.0 or OSR 2.5
(2) Load the "USB Supplement" (brings it up to OSR2.1 level or
OSR2.5)
(3) Load the Intel740(tm) drivers.
Note: If this is not done in this order, then the Intel740 drivers
will not be loaded properly and the standard Microsoft VGA drivers
will be loaded instead.
Also included are release notes describing any problems or issues that
were known at the time of shipment.
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 Intel i740 IPC380
Operating System
Windows 98
Size Driver
703KB
File Name
inteli740win9x.exe
Observations
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Graphic Accelerator Driver Installation Procedure
4.0 Web Site Location and Access
**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the Intel740(tm) graphics accelerator
software, and latest version of DirectX*. The software and hardware
requirements for this release are as follows:
## Software Drivers (SDR) Version: PV3.0W
## Windows* 95 Version: OSR2.1 or 2.5**
## Windows* 98 Version: RCO (1691)
## DirectX* 5.0 Version: RC2-Gold (4.05.01.1650)
## Indeo CODEC 4.4, 4.5
## Video BIOS version: 212, 220, 230, 231
## Intel740 graphics accelerator stepping A2
----------------
Version number
----------------
## Driver Release Version #
PV1.0 4.10.01.1516-980316
PV1.0a 4.10.01.1526-980326
PV1.5 4.10.01.1701-980501
PV2.0a 4.10.01.1915-980715
PV2.1 4.10.01.1927-980727
PV3.0w 4.10.01.2029-980829
Video BIOS/Driver compatible combination
VIDEO BIOS PV 1.0 PV1.0a PV 1.5 PV 2.0a PV 2.1 PV3.0w
---------- ------ ------ ------ ------- ------ ------
VB212 yes yes yes yes yes yes
VB220 no no yes yes yes yes
VB230 no no no yes yes yes
VB231 no no no no no yes
The Intel740(tm) graphics accelerator is optimized to run with the
following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors
(2) Motherboard: Based on the Intel(R) 440LX, 440BX, 440GX AGPset
or a later generation Intel AGPset, motherboard must have an
unpopulated AGP slot or the Intel740 chip must be down on the
motherboard
(3) Operating System: Windows* 95 OSR 2.1 or later (with USB
Supplement) or Windows* 98.
**When loading the Intel740 drivers and OSR2.1 or OSR 2.5 for the
first time, the software should be loaded in the following order:
(1) Load OSR2.0 or OSR 2.5
(2) Load the "USB Supplement" (brings it up to OSR2.1 level or
OSR2.5)
(3) Load the Intel740(tm) drivers.
Note: If this is not done in this order, then the Intel740 drivers
will not be loaded properly and the standard Microsoft VGA drivers
will be loaded instead.
Also included are release notes describing any problems or issues that
were known at the time of shipment.
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 SIS 6326 IPC380
Operating System
Windows 98
Size Driver
7.7MB
File Name
sis6326win98.exe
Observations
[version]
Class=DISPLAY
signature="$CHICAGO$"
Provider=%Mfg%
CatalogFile=sis6326.cat
[DestinationDirs]
DefaultDestDir=11
Driver.Copy = 11
Inf.Copy=17
Inf.Delete=17
Setuplib.Copy=11
ICD.Delete=11
[SourceDisksNames]
1="Windows 95 SiS 6326 Driver Disk",,0
[SourceDisksFiles]
sis6326m.drv=1
sis6326m.vxd=1
dd326.dll=1
dd326_32.dll=1
sis6326m.inf=1
setuplib.dll=1
sis6326.cat=0,,920
[Manufacturer]
%Mfg%=Mfg
[Mfg]
%PCI\VEN_1039&DEV_6326.DeviceDesc%=Driver.Install, PCI\VEN_1039&DEV_6326&SUBSYS_63261039
%PCI\VEN_1039&DEV_6326.DeviceDesc%=Driver.Install, PCI\VEN_1039&DEV_6326
[Driver.Install]
DelFiles=ICD.Delete
CopyFiles=Driver.Copy, Inf.Copy
DelReg=Prev.DelReg1, Prev.DelReg2
AddReg=Driver.AddReg1, Driver.AddReg2
UpdateInis=MMPower.UpdateInis
[SystemIni.Update]
%10%\System.ini,boot,,"display.drv=sis6326m.drv",0
[SystemIni.Restore]
%10%\System.ini,boot,,"display.drv=pnpdrvr.drv",0
[MMPower.UpdateInis]
%10%\System.ini,386Enh,,"EMMExclude=C000-CFFF",0
; for setup.exe
[Setup.DriverCopy]
DelFiles=ICD.Delete
CopyFiles=Driver.Copy, Inf.Copy, Setuplib.Copy
; for setup.exe
[Setup.Registry]
;UpdateInis=SystemIni.Update
DelReg=Prev.DelReg1, Prev.DelReg2
AddReg=Driver.AddReg1, Driver.AddReg2
UpdateInis=MMPower.UpdateInis
; for package uninstall
; don't rename this section
[P.U]
UpdateInis=SystemIni.Restore
DelReg=Prev.DelReg1, Prev.DelReg2, Uninstall.DelReg
AddReg=Driver.Standard
DelFiles=Driver.Copy, Inf.Copy
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 SIS 6326 IPC380
Operating System
Windows NT
Size Driver
657KB
File Name
sis6326winnt40.exe
Observations
[Version]
Signature="$CHICAGO$"
Provider=%SiS%
ClassGUID={4D36E968-E325-11CE-BFC1-08002BE10318}
Class=Display
[DestinationDirs]
DefaultDestDir = 11
SiSV.Driver = 12 ; drivers
SiSV.Miniport = 12 ; drivers
SiSV.Display = 11 ; system32
;
; Driver information
;
[Manufacturer]
%SiS% = SiS.Mfg
[SiS.Mfg]
%SiS% = SiSV
;
; General installation section
;
[SiSV]
CopyFiles=SiSV.Miniport, SiSV.Driver, SiSV.Display
AddReg=SiSV.Util.Addreg
;
; File sections
;
[SiSV.Miniport]
SiSV.sys
[SiSV.Driver]
SiSVwdj.sys
[SiSV.Display]
SiSV256.dll
sisgamma.dll
;
; Service Installation
;
[SiSV.Services]
AddService = SiSV, 0x00000002, SiSV_Service_Inst, SiSV_EventLog_Inst
AddService = SiSVwdj, 0x00000002, SiSVwdj_Service_Inst, SiSVwdj_EventLog_Inst
[SiSV_Service_Inst]
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary = %12%\SiSV.sys
[SiSV_EventLog_Inst]
AddReg = SiSV_EventLog_AddReg
[SiSV_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\SiSV.sys"
HKR,,TypesSupported,0x00010001,7
[SiSVwdj_Service_Inst]
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
LoadOrderGroup = Video
ServiceBinary = %12%\SiSVwdj.sys
Company
I-OMagic
Categories
Graphics cards
Model
I-OMagic MagicVIdeo 3Dep AGP
Description
DR-DA500 Intel i740 IPC380
Operating System
Windows NT
Size Driver
309KB
File Name
inteli740winnt40.exe
Observations
1.0 Introduction
2.0 Release Notes
3.0 Intel740(tm) Driver Installation Procedure
4.0 Web Site Location and Access
**********************************************************************
1.0 Introduction
**********************************************************************
This README file contains the installation procedure and usage
information for the Intel740(tm) graphics accelerator Windows* NT 4.0
production software. The software and hardware requirements for this
release are as follows:
** Software Drivers Release (SDR) Version: PV 3.0W
** Windows* NT 4.0 Version: Service Pack 3.0
** Video BIOS version: 212, 220, 230, 231
** Intel740(tm) graphics accelerator stepping A2
----------------
Version number
----------------
## Driver Version #
PV1.0 3.10.1513-980313-optPC1, 4.0.32
PV1.5 3.10.1629-980429-opt, 4.0.32
PV2.0 4.0.1381.1902-980702
PV3.0W 4.01381.2024-980824, 4.0.32
------------------------------------------
Video BIOS/driver compatible combination
------------------------------------------
VIDEO BIOS PV1.0 PV1.5 PV2.0 PV3.0W
---------- ----- ----- ----- ------
VB212 YES YES YES YES
VB220 NO YES YES YES
VB230 NO NO YES YES
VB231 NO NO NO YES
The Intel740(tm) graphics accelerator is optimized to run with the
following PC configurations:
(1) Processor: Intel(R) Pentium(R)II processors.
(2) Motherboard: Based on the Intel(R) 440LX, 440BX, 440GX AGPset
or a later generation Intel AGPset, motherboard must have an
unpopulated AGP slot or the Intel740 chip must be down on the
motherboard.
(3) Operating System: Windows* 95 OSR 2.1 or later (with USB
Supplement), Windows* 98, or Windows* NT 4.0 SP3 or later
Peripherals: A CD-ROM drive to install software and drivers
(4) To support fully optimized AGP configuration, 32MB of system
memory is recommended.
Also included are release notes describing any problems or issues that
were known at the time of shipment.
**********************************************************************
2.0 Release Notes
**********************************************************************
---------------------
Product Version 1.0
---------------------
(1) Supports all 2D and 3D (OpenGL*) operations.
(2) The PV1.0 drivers do not function in a multiprocessor
environment. This includes a system with two or more processors or a
uniprocessor system that runs with a multiprocessor, NT 4.0 kernel.
Intel plans on fixing this issue in a future driver release.
Access to Official Website I-OMagic
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.